Applications :

Energy Storage Pulsation Damper/dampener Volume Compensator Pressure Compensator Emergency Energy Reserve Counter Balance Hydraulic Line Shock Damper Shock Absorber Hydraulic Spring Fluid Separator

We are manufacturer of all types of castings, clamping devices, jigs and fixtures, mining equipments, work&hob arbors, collets, brake drums, pulliesand precision job works, and specilized job works as per clients requirements or as per drawings.We are working in relavent engineering fields like designing, processing and consultingsince 1986

• More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
• Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections.
• one piece self vanted foot mounted, center suction volute casting, single stage, closed / semi open dynamically balanced impeller.
• Flange drilling standards as per DIN 24255 / ISO 2858 or as per customer's requirement.
• Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
• A robust and solid construction that guarantees long life even under high suction pressure conditions.
• Heavy-duty, deep-grooved bearings with minimum 50, 000 hours operating life under normal condition. (Grease lubricated, oil lubrication available on request)
• Heavy-duty, stiff solid shaft design with low L3/D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life.
• Seal housing is constructed to accommodate different seal/gland designs, so as to meet the severe heavy-duty requirements.
• Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
• Special design for high temperature thermic fluid available in request

• or pumping clear/turbid water/chemicals & volatile liquids.Air conditional plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine.

  Delivery sizes up to 250mmCapacity up to 990 m³/hrHead up to 120 metersRPM 500 to 3600

Range : Frame : 63 to 280 HP : 0.25 HP to 125 HP (2 pole to 12 pole)

Applications : Chemical plants, petroleum Refinery, solvent plants, pharmaceutical ind., mines & all hazardous products handling areas, etc. Flameproof motors suitable for Zone - 1 and Zone - 2 areas for gas groups I, II A, II B, and II C are approved by CMRI, DGMS, CCoE, BIS and DGFAS & LI Single & Three phaseflame proof motors. All motors are available with class "F" insulation (H class at option) Std voltage range 415 V 10%, 50 Hz, 5% options - 110 V to 650 V & 25 to 75 Hz All motors confirming to relevant IEC and IS standards for performance, diminsions, protection, insulation, mounting enclosures, windings, terminal markings, vibration, noise level and cooling. Foot, Flange, Face mounted and combinations of them available. Options: Standard motors in 63 to 280 frames. Break motors, Cooling Tower motors. Double Shaft, Special Shaft. Multi Speed. Dual voltage, Dual frequency. Crane duty / Lift duty suitable for SI to S9 duty, different D.D.F. and various no of starts / stops / reversals. Suitable for different service factors. Suitable for VVVF operation. NEMA & IEC frames.

This pump Float on water / chemical, useful when suction lift is too high.

• Submersible pump horizontal single stage in cast iron/ stainless steel up to 10HP.
• Submersible pump for borewell, suitable for 3", 4" & 6" bore diameter up to 30HP.
• Sewage Submersible pump for mud sewage, dirty water application in cast iron / stainless steel construction.
• Also available these pumps in horizontal or in vertical version.
• We can also offer these pumps with water cooled / oil cooled windings.

• Features :	Application :
  Horizontal and vertical submersible pump set Water filled submersible pump set with copper rotor Available in 23 stages or even more stages High efficiency Made pumps as per customer's special applications Available in cast iron/stainless steel construction Always remain under water, no need of priming / footvalve No foundation required Maintenance free	Ideal for fountains, domestic use in buildings, hotels, gardening and irrigation, even in industries for clear water handling and special pumps built for high pressure and dirty water.

We are offering heavy earth moving mining equipment.Heavy duty mining equipment used to diging and conclave support for clay moving

Applications :

Energy Storage Pulsation Damper/dampener Volume Compensator Pressure Compensator Emergency Energy Reserve Counter Balance Hydraulic Line Shock Damper Shock Absorber Hydraulic Spring Fluid Separator

We are manufacturer of all types of castings, clamping devices, jigs and fixtures, mining equipments, work&hob arbors, collets, brake drums, pulliesand precision job works, and specilized job works as per clients requirements or as per drawings.We are working in relavent engineering fields like designing, processing and consultingsince 1986

• More than 3mm corrosion allowance (cast iron) for extended use on corrosive applications.
• Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections.
• one piece self vanted foot mounted, center suction volute casting, single stage, closed / semi open dynamically balanced impeller.
• Flange drilling standards as per DIN 24255 / ISO 2858 or as per customer's requirement.
• Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
• A robust and solid construction that guarantees long life even under high suction pressure conditions.
• Heavy-duty, deep-grooved bearings with minimum 50, 000 hours operating life under normal condition. (Grease lubricated, oil lubrication available on request)
• Heavy-duty, stiff solid shaft design with low L3/D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life.
• Seal housing is constructed to accommodate different seal/gland designs, so as to meet the severe heavy-duty requirements.
• Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
• Special design for high temperature thermic fluid available in request

• or pumping clear/turbid water/chemicals & volatile liquids.Air conditional plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine.

  Delivery sizes up to 250mmCapacity up to 990 m³/hrHead up to 120 metersRPM 500 to 3600

Range : Frame : 63 to 280 HP : 0.25 HP to 125 HP (2 pole to 12 pole)

Applications : Chemical plants, petroleum Refinery, solvent plants, pharmaceutical ind., mines & all hazardous products handling areas, etc. Flameproof motors suitable for Zone - 1 and Zone - 2 areas for gas groups I, II A, II B, and II C are approved by CMRI, DGMS, CCoE, BIS and DGFAS & LI Single & Three phaseflame proof motors. All motors are available with class "F" insulation (H class at option) Std voltage range 415 V 10%, 50 Hz, 5% options - 110 V to 650 V & 25 to 75 Hz All motors confirming to relevant IEC and IS standards for performance, diminsions, protection, insulation, mounting enclosures, windings, terminal markings, vibration, noise level and cooling. Foot, Flange, Face mounted and combinations of them available. Options: Standard motors in 63 to 280 frames. Break motors, Cooling Tower motors. Double Shaft, Special Shaft. Multi Speed. Dual voltage, Dual frequency. Crane duty / Lift duty suitable for SI to S9 duty, different D.D.F. and various no of starts / stops / reversals. Suitable for different service factors. Suitable for VVVF operation. NEMA & IEC frames.

This pump Float on water / chemical, useful when suction lift is too high.

• Submersible pump horizontal single stage in cast iron/ stainless steel up to 10HP.
• Submersible pump for borewell, suitable for 3", 4" & 6" bore diameter up to 30HP.
• Sewage Submersible pump for mud sewage, dirty water application in cast iron / stainless steel construction.
• Also available these pumps in horizontal or in vertical version.
• We can also offer these pumps with water cooled / oil cooled windings.

• Features :	Application :
  Horizontal and vertical submersible pump set Water filled submersible pump set with copper rotor Available in 23 stages or even more stages High efficiency Made pumps as per customer's special applications Available in cast iron/stainless steel construction Always remain under water, no need of priming / footvalve No foundation required Maintenance free	Ideal for fountains, domestic use in buildings, hotels, gardening and irrigation, even in industries for clear water handling and special pumps built for high pressure and dirty water.

We are offering heavy earth moving mining equipment.Heavy duty mining equipment used to diging and conclave support for clay moving