Product / Services
Post Buy Requirement
CE
Creative Engineers
Rajkot, Gujarat, India
Add Review
Call 08068051338 Ext. 400

Our Products

  1. Industrial Pump 3 Products available
  2. Pumps, Pumping Machines & Parts 4 Products available
  3. Measuring Instruments & Equipment 7 Products available
  4. Others 11 Products available

Pumps, Pumping Machines & Parts #1856597

sanitary pumps

Sanitary Pumps

Applications :

  • Milk, Cream, Butter Milk Condensed Milk
  • Fruit Juice, Beer, Wine, Sugar Syrup
  • Vitamin Solutions, Sugar & Confectionery.
  • R O Water, DM water, Pure Water.Water for Injection (WFI)
  • Vegetable Oil, Mineral Oil, Lub Oil etc.
  • Pharmaceutical Formulations, Syrup etc.
  • Alkaline Solutions / Alcoholic Drinks
  • Acids, Fine Chemicals
  • Bottling Plants, Soft Drinks & Distillery
  • Food Processing / Liquid Food Stuffs
  • Water Treatment Plats
  • Colour dyes and Pigments / Paints
  • Descaling Applications, Paper & Cement Industries
  • Detergent, Soaps, Paste & Shampoo
  • Textile Sizing, Dyeing & Finishing Systems
  • Natural Cellulose Fiber / Synthetic Fiber System
  • Hot & Cold Water Pumping.

  • Features :

    • As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.
    • Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less crevice corrosion.
    • Super finish surface also ensure no ingress or emission of germs or impuritiesduring pumping or idling which is basic requirement of sterlie / hygienic application
    • Designed for CIP (clean in place) or manual cleaning
    • Pumps are highly energy efficient and requires less NPSH to function without cavitation
    • Pump can handle liquids having viscosities up to 1500 centipoise
    • The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators.
    • Pumps are available with closed/semiopen impellers.
    • The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals.
    • Minimum working / rotating parts
    • Safe and quite operation levels.
    • Gentle product handling with lower maintenance and downline cost.
    • Dynamically combinations of seal faces as per customer's requirement (single seal / double seal, seal external cooling)
    • Suitable for standard motor or flange type or foot cam flange type motor or engine
    • Monobloc or bare pumps or with trolley
    • Also with flame proof motors
    • Various types of connection like - tri'clove joints SMS, Flanges or threaded nipple/coupling
    • Pumps with adjustable legs, available in request

No.

Description

 No.

Description
1 Eye Type Wing Nut 9 Stud S.S.
2 Triclover Joint 10 Back Plate S.S.
3 Cassing S.S. 11 Bearing Bracket CI
4 Impeller Nut S.S. 12 Impeller Key S.S.
5 Impeller S.S. 13 Rotor Shaft S.S.
6 Gasket 14 Part of Triclover
7 Mechanical Seal 15 Motor Cover S.S.
8 Distance Piece S.S. 16 Motor
MODEL HP SIZE Head in Meter Discharge in LPM at 2900 RPM
3 5 7 10 12 15 17 20 22 25 27 30 35 40
CFS-1 0.25 12X12 40 30 - - - - - - - - - - - -
CFS-2 0.5 25X25 - 100 45 - - - - - - - - - - -
CFS-3 1 25X25 - - 140 120 70 35 - - - - - - - -
CFS-3A 1 38X38 - - 181 95 50 - - - - - - - - -
CFS-4A 1.5 38X38 - - - - - 160 130 90 75 - - - - -
CFS-4B 1.5 50X50   - - - - 250 166 85 at 18mtr - - - -
CFS-5A 2 38X38 - - - - 225 190 155 105 78 40 - - - -
CFS-5B 2 50X50 - - 330 250 160 85 - - - - - - - -
CFS-6A 3 50X38 - - - - - - - 250 220 180 135 108 50 at 33 mtr
CFS-6B 3 50X50 - - - - - 330 310 300 250 160 85 - - -

 

MODEL HP SIZE Head in Meter Discharge in LPM at 2900 RPM
16 20 24 28 32 36 40 44 48
CFS-7A 5 50X38 - - 260 230 190 145 90 - -
CFS-7B 5 65X50 400 370 300 230 180 - - - -
CFS-8A 7.5 50X38 - - 290 280 250 225 190 120 60
CFS-8B 7.5 65X50 500 450 385 280 230 - - - -
CFS-9A 10 50X38 - 500 480 470 450 410 350 290 190
CFS-9B 10 65X50 560 510 450 370 280 200 150 - -
View Complete Details
Ask Latest Price & Details
Mud Pumps

Mud Pumps

Special Features

  • Excellent quick automatic action without foot valve up to 8 mtrs.

  • Automatic air release during priming.

  • Back pull out design, so easy maintainance without disturbing pipe lines.

  • Dynamically balanced rotating parts ensure less vibrations.

  • Better efficiency because of good hydraulic design.

  • Minimum parts, fast repairing at low cost, Also pump is available at economical rate.

  • Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.

  • Also offered pump with trolley / trailer to move it from one place to another.

  • Monobloc pumps can be able to with stand with wide voltage fluctuations.

  • Less expensive & easily available spares.

  • Pumps can be fitted with mechanical seal as per customer's requirements.

  • Very simple construction, only two moving parts.

  • Easy inspection of impeller.

  • Large diameter solids handled . up to 60 mm

  • High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating

  • Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.

  • Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.

  • Application

    • Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

    • Dewatering Basements, Trenches, Construction sites.

    • Onboard shift, as bildge, for desk wash & engine cooling

    • Tiles & Marble factories, effluent plants.

    • Mobile Machinery : Cooling water for marine engines and shovels.

    • Any application where priming is to be avoided.

    • Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

    • Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

    • Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

    • Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

    • Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.

    • Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

    • Application

      • Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

      • Dewatering Basements, Trenches, Construction sites.

      • Onboard shift, as bildge, for desk wash & engine cooling

      • Tiles & Marble factories, effluent plants.

      • Mobile Machinery : Cooling water for marine engines and shovels.

      • Any application where priming is to be avoided.

      • Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

      • Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

      • Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

      • Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

      • Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.

      • Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

Material of Construction
   

Standard

 Options
Casting -

Cast iron FG 260

 SS-304/316/gunmetal
Impeller -

Cast iron FG 260

 SS-304/316/gunmetal
Shaft -

EN-8

 SS-410/304/316
Sleeve -

SS-410

 SS-304/316
Gland -

TIWA

 Mechanical seal, PTFE

 

Monobloc & Motor Coupled
MODEL

MOTOR
KW HP

PIPE
SIZE
IN MM Suc. x Del.

SPEED
IN
R.P.M.

TOTAL HEAD IN METERS

Solid Hand-ling
Size(MM)
6 8 10 12 14 15 16 18 19 20 22 24 25 26 28 30 32 34 36

DISCHARGE LITERS PER SECOND
MP-0 0.75 1.00 40X40 2850 5.1 4.6 4.1 3.5 2.5 1.8 - - - - - - - - - - - - - 7.0
MP-1 1.50 2.00 40X40 2850 - - 6.5 5.7 4.8 4.3 3.8 2.5 1.7 0.8 - - - - - - - - - 8.5
MP-2 2.20 3.00 50X50 2900 - - 9.4 8.9 8.1 7.7 7.3 6.3 5.7 5.1 3.9 2.4 1.6 0.7 - - - - - 10.5
MP-3A 3.70 5.00 80X80 2900 - - - - - - - - - 9.6 8.8 8.0 7.6 7.2 6.5 5.7 4.9 3.7 2.1 7.0
MP-3 5.50 7.50 80X80 2900 - - - - - - - - - 15.4 15.0 14.4 14.0 13.5 11.9 10.0 7.7 5.1 3.2 14.5
MP-3L 3.70 5.00 80X80 1450 20.0 18.7 17.3 15.7 1.5 11.7 9.6 5.4 - - - - - - - - - - - 15.5
MP-4LA 7.50 10.00 100X100 1450 - - 34.9 32.7 3.0 28.8 27.5 24.4 22.8 21.3 17.2 12.9 10.0 6.7 - - - - - 18.5
MP-4L 9.30. 12.50 100X100 1450 - - 42.3 39.0 35.7 34.3 32.6 29.5 27.9 26.2 22.8 18.6 16.2 13.4 5.7 - - - - 23.0
MP-6LA 15.00 20.00 150X150 1450 - - 66.1 63.1 59.4 57.3 54.8 48.8 45.4 42.2 34.1 23.7 - - - - - - - 34.0
MP-6L 18.70 25.00 150X150 1450 - - 74.0 71.8 67.9 65.9 63.8 58.3 55.2 51.7 44.8 33.7 27.3 19.7 - - - - - 40.0






View Complete Details
Ask Latest Price & Details
Self Priming Pumps

Self Priming Pumps

Features :

  • All Wetted Parts Of Pumps Are Made From Lost Wax Process (investment Casting), So Execellent Surface Finish, Smooth Flow Path/ Hydraulic Passage And No Casting Defects Like Blow Holes, Cracks Etc
  • Centripetal / Regenerative Impeller For Better Suction
  • Pumps Will Be Normally Available In CF-8m (Gun metal, Alloy-20) And Also In Other Material As Per Customer's Requirements.
  • Single / multistage Pumps To Handle Crystal Clear Liquids For High Pressure Duties.
  • Very Quick Priming, No Need Of Foot Valves
  • Very High Suction Capacity Up to 8 Meters Without Much Noise.
  • Various Types Of Sealing Arrangements As Per Customer's Liquid Characteristics. Normally Fitted With Carbon/ceramic Seal Faces With PTFE Cup And Viton Rubber.
  • Pumps Are Available In Monobloc And In Bare Type, Also With Flameproof Motor. All Motors Are Of "TEFC" Type
  • Pump Can Be Offered With Electropolishing For Some Special Requirements.
  • Able To Handle Temperature Up To 80 C.
  • Trolley mounted available.
  • Also available with 120 Volt / 60 Hz.
  • Custom built pumps available.

MODEL

HP * RPM

SIZE

HEAD IN METERS

5

10

15

20

25

30

35

40

45

50

60

70

75
SP-0

0.5x2900

12x12

18

18

17

14

7

1

  

DISCHARGE
SP-1

0.5x2900

25x25

35

25

21

17

9

7

3

  

IN
SP-2

0.5x2900

25x25

33

26

22

15

7

3

      

LITRE
SP-3

1x2900

25x25

49

49

45

39

36

27

19

13

    

PER
SP-4 (2 - Stage)

1x2900

25x25

33

29

25

22

18

15

11

7

2

    

MINUTE
SP-5

1x1450

25x25

65

57

48

42

35

27

21

12

3

        
SP-6 (2 - Stage)

2x1450

25x25

81

74

68

62

58

55

50

46

41

37

28

15

8
View Complete Details
Ask Latest Price & Details
Coolant Pumps

Coolant Pumps

Features:

  • Available from 0.16 HP to 5 HP
  • Capacity from 40 Lpm to 600 Lpm
  • Head from 2 mtr to 230 mtrs.
  • Std ranges are as per IS 2161
  • Available in 1 phase / 3 phase
  • All motor are with class'B' insolution, class 'I' & 'H' available on request
  • All motors are rated for continous duty
  • Flame proof motors availableon request
  • Available in different MOC like cast iron/stainless steel/ gun metal etc.
  • Single stage to 24 stages.

Application:

Cooling for turning, grinding, milling circulation, temperature control. filtration. edm wire cut, cnc machines.

Model KW/HP Immersion Discharge Head in Meters at 2900 RPM
Depth Size 2 4 6 8 10 12 14
SCP-1 0.12/0.16 120 ½" or ¾" 40 20 - - - - -
SCP-2 0.12/0.16 170 ½" or ¾" 40 20 - - - - -
SCP-3 0.18/0.25 170 ¾" 60 35 - - - - -
SCP-4 0.18/0.25 220 ¾" 60 35 - - - - -
SCP-5 0.25/0.33 220 1" 60 35 - - - - -
SCP-6 0.37/0.5 220 1" 100 75 45 - - - -
SCP-7 0.37/0.5 270 1" 100 75 45 - - - -
SCP-8 0.55/0.75 270 1" 160 130 90 50 - - -
SCP-9 0.55/0.75 350 1" 160 130 90 50 - - -
SCP-10 0.75/1.0 270 ¼" 250 210 170 130 90 60 20
SCP-11 0.75/1.0 350 ¼" 250 210 170 130 90 60 20
SCP-12 0.75/1.0 440 ¼" 250 210 170 130 90 60 20
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us