Mud Pumps

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Special Features Excellent quick automatic action without foot valve up to 8 mtrs. Automatic air release during priming. Back pull out design, so easy maintainance without disturbing pipe....

View More Details

Send Enquiry

Company Information

Creative Engineers

Gondal, Rajkot, Gujarat

View Number

Member Since 14 Years
Nature of Business Retailer
Year of Establishment 1986

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Special Features

Excellent quick automatic action without foot valve up to 8 mtrs.
Automatic air release during priming.
Back pull out design, so easy maintainance without disturbing pipe lines.
Dynamically balanced rotating parts ensure less vibrations.
Better efficiency because of good hydraulic design.
Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.
Also offered pump with trolley / trailer to move it from one place to another.
Monobloc pumps can be able to with stand with wide voltage fluctuations.
Less expensive & easily available spares.
Pumps can be fitted with mechanical seal as per customer's requirements.
Very simple construction, only two moving parts.
Easy inspection of impeller.
Large diameter solids handled . up to 60 mm
High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating
Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.

Application

Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
Dewatering Basements, Trenches, Construction sites.
Onboard shift, as bildge, for desk wash & engine cooling
Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels.
Any application where priming is to be avoided.
Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

Application

Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
Dewatering Basements, Trenches, Construction sites.
Onboard shift, as bildge, for desk wash & engine cooling
Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels.
Any application where priming is to be avoided.
Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

Material of Construction

		Standard	Options
Casting	-	Cast iron FG 260	SS-304/316/gunmetal
Impeller	-	Cast iron FG 260	SS-304/316/gunmetal
Shaft	-	EN-8	SS-410/304/316
Sleeve	-	SS-410	SS-304/316
Gland	-	TIWA	Mechanical seal, PTFE

Monobloc & Motor Coupled

MODEL	MOTOR KW HP		PIPE SIZE IN MM Suc. x Del.	SPEED IN R.P.M.	TOTAL HEAD IN METERS																			Solid Hand-ling Size(MM)
					6	8	10	12	14	15	16	18	19	20	22	24	25	26	28	30	32	34	36
					DISCHARGE LITERS PER SECOND
MP-0	0.75	1.00	40X40	2850	5.1	4.6	4.1	3.5	2.5	1.8	-	-	-	-	-	-	-	-	-	-	-	-	-	7.0
MP-1	1.50	2.00	40X40	2850	-	-	6.5	5.7	4.8	4.3	3.8	2.5	1.7	0.8	-	-	-	-	-	-	-	-	-	8.5
MP-2	2.20	3.00	50X50	2900	-	-	9.4	8.9	8.1	7.7	7.3	6.3	5.7	5.1	3.9	2.4	1.6	0.7	-	-	-	-	-	10.5
MP-3A	3.70	5.00	80X80	2900	-	-	-	-	-	-	-	-	-	9.6	8.8	8.0	7.6	7.2	6.5	5.7	4.9	3.7	2.1	7.0
MP-3	5.50	7.50	80X80	2900	-	-	-	-	-	-	-	-	-	15.4	15.0	14.4	14.0	13.5	11.9	10.0	7.7	5.1	3.2	14.5
MP-3L	3.70	5.00	80X80	1450	20.0	18.7	17.3	15.7	1.5	11.7	9.6	5.4	-	-	-	-	-	-	-	-	-	-	-	15.5
MP-4LA	7.50	10.00	100X100	1450	-	-	34.9	32.7	3.0	28.8	27.5	24.4	22.8	21.3	17.2	12.9	10.0	6.7	-	-	-	-	-	18.5
MP-4L	9.30.	12.50	100X100	1450	-	-	42.3	39.0	35.7	34.3	32.6	29.5	27.9	26.2	22.8	18.6	16.2	13.4	5.7	-	-	-	-	23.0
MP-6LA	15.00	20.00	150X150	1450	-	-	66.1	63.1	59.4	57.3	54.8	48.8	45.4	42.2	34.1	23.7	-	-	-	-	-	-	-	34.0
MP-6L	18.70	25.00	150X150	1450	-	-	74.0	71.8	67.9	65.9	63.8	58.3	55.2	51.7	44.8	33.7	27.3	19.7	-	-	-	-	-	40.0