C & S Electric Ltd

Okhla, Delhi

Busbar trunking for electrical distribution is an alternative to cumbersome conventional cable distribution system. It has the advantages of expansions, changes, replacenment and reusing capability in future.Busbars in enclosure are heid tight, and cannot easily slide even in vertical run when used as rising mains.Automatic polarity is maintained during installation.System can be mounted edgewise or flat wise, horizontally or vertically in any direction with all kinds of bends, and tees etc. Two sections can be electrically Isolated for maintenance and testing in installed condition without dismantling or removal of any section. Fire barrier provision with F & T rating for 2 hours can be provided as per requirement for floor and wall crossings (as per UL 1479) .

Benefits:

Our By Pass Switches are designed in order to meet the complex requirements of electrical systems of today and tomorrow ensuring reliability which can offer un-interrupted service throughout the product life undergoing all the stresses that system encounters.C&S pioneered the concept of positive isolation in case of welding of contacts. In the event of extremely high current leading to welding of contacts, the handle will not turn beyond 45 from the ON position, clearly indicates that the supply is ON and contacts get welded.

Convenience of easy contacts visibility, permits contact inspection, without removing the switch from installation, thus saving down time. Door interlocking prevents opening in the ON position, guarding the operator against any accidental mishap. As a standard upto 3 padlocks are provided in the OFF position to prevent closing the circuit during maintenance work. They can also be provided in the ON position. Using a suitable gasket along with handle enhances ingress protection level to IP 54.

Benefits

As power distribution needs play a pivotal role in all the significant sectors namely Commercial, Industrial and Residential, improved Breaker performance through better electrical safety, higher operational endurance, continued service and reduced cost have become of paramount importance. C&S MCBs have been engineered to constantly fulfill the above requirements. With these features C&S is setting new standards for user friendly and superlative electrical circuit protection.

The C&S MCB is a high performing Thermal Magnetic current limiting device with the ability to disconnect short circuits up to 10kA. The range is available in tripping characteristics types B, C and D for 1P, 1P+N, 2P, 3P, 3P+N & 4P configurations in 0.5 125A current ratings. All metal components for operating mechanism of WiNtrip circuit breaker are specially treated for high self lubrication leading to repeat accuracy during service life. The MCBs conform to Standards: IEC 60898-1995 and IS/IEC 60898-1:2002 and stand guaranteed for best quality for optimum performance.

Benefits

C&S Smartsol is a smart protection solution against overload & Short Circuit. Smart sol, available in 6A, 1 OA, 16A, 20A, 25A & 32A conforms to IS/IEC: 60898: Part 1: 2002. It is equipped with Brass terminal in both side and provided with Supply Indication system. Smart solution is available in SPN & DP with a Rated Short Circuit Capacity of 4.5kA. The product comes with IP20 protection rating.

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.Its time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.Its time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.

Benefits

C&S Electric Ltd., a leading electrical and electronicequipment manufacturer, introduces LED based energyefficient lighting products.Its time to switch over to a new generation of lighting solutions-C&SLED. Be it homes, offices, commercial or industrial spaces, these LED lightsare brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energyconsuming conventional lamp based lighting products.The elegantlydesigned range of products meets all your necessary safety standards because of theirlonger life & low energy cost, the total cost ofownership is very low.

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.Its time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.

Benefits

• Self contained package substation
• All the equipment packed in a separate compartment
• All compartments are individually accessible
• Individual Door Operated lamp for illumination purpose

CSEPRO series offers a multi functional comprehensive smart protection solution for Feeder, Generator, Motor & Transformersegment.CSEPRO family of protective relays are advance numerical relays that provide multi protection and monitoring with reliable andfast protection solutions in a single unit.In this family of CSEPRO series, the CSEPRO-Fxxx is an advanced feeder protection solution which has fast, sensitive andsecure protection for feeder faults.CSEPRO-Fxxx also provides an automation solution of power control. It complies with IEC 60870-5-103, IEC 61850, Modbusprotocol for high integration of protection & control.CSEPRO-Fxxx offers following model based features to cover requirements of the wide range of users.

CSFPI, Fault Passage Indicator Earth is designed to detect and indicate Earth fault on a cable system, in RMU networks with oneinput / open ring arrangement. The unit will indicate a fault condition when current is detected above set trip current settings. Faultcurrent is sensed by cable mounted sensor, which gives signal to indication unit. Sensor must be mounted on screened cable and canbe retrofitted on the cable.If the Earth current exceeds programmed set current for programmed response time the fault will be indicated by red flashing LED andrelay contact will be activated. Reset occurs automatically by preset time passage or by a external potential free input or by recoveringof 230V AC (Not a Aux. Supply) Voltage or by manually via push button. A Functional Test can also be carried out on field by pressingfor more than 8 Sec and Battery Test by pressing the Push button for more than 6 Sec.The sensor for earth fault detection is a summation type current sensor and it is dimensioned in such a way that if can be mountedaround all three phases of the network.Programmable parameters can be set through DIP switches which are accessible by opening the Front Cover of the CSFPI indicationunit. Exit (Disable) option is available for fault detection.

Benefits