C & S Electric Ltd - Product

Busbar trunking for electrical distribution is an alternative to cumbersome conventional cable distribution system. It has the advantages of expansions, changes, replacenment and reusing capability in future.Busbars in enclosure are heid tight, and cannot easily slide even in vertical run when used as rising mains.Automatic polarity is maintained during installation.System can be mounted edgewise or flat wise, horizontally or vertically in any direction with all kinds of bends, and tees etc. Two sections can be electrically Isolated for maintenance and testing in installed condition without dismantling or removal of any section. Fire barrier provision with F & T rating for 2 hours can be provided as per requirement for floor and wall crossings (as per UL 1479) .            Benefits: Energy Saver Flexible Distribution Less Space Conserves Raw Materials & Produces less waste Reusable      Features   Independent Certification Authority- ASTA-UK, CPRI-India Busbar Arrangement Air Insulated type Rated Operational Voltage (Ue) 1000 Volt, AC Rated Insulation Voltage (Ui) 1000 Volt, AC Rated Dielectric Voltage 3.5 KV r.m.s Rated Frequency 50 Hz / 60 Hz Busbar Insulator Glass Filled Noryl / Polyster (Class -F) Plug -in-Box 32~800 A Busbar Insulator Glass Filled Noryl / Polyster (Class -F)

Our By Pass Switches are designed in order to meet the complex requirements of electrical systems of today and tomorrow ensuring reliability which can offer un-interrupted service throughout the product life undergoing all the stresses that system encounters.C&S pioneered the concept of positive isolation in case of welding of contacts. In the event of extremely high current leading to welding of contacts, the handle will not turn beyond 45 from the ON position, clearly indicates that the supply is ON and contacts get welded. Convenience of easy contacts visibility, permits contact inspection, without removing the switch from installation, thus saving down time. Door interlocking prevents opening in the ON position, guarding the operator against any accidental mishap. As a standard upto 3 padlocks are provided in the OFF position to prevent closing the circuit during maintenance work. They can also be provided in the ON position. Using a suitable gasket along with handle enhances ingress protection level to IP 54.   Benefits   Compact construction Window for visual contact inspection permits contact inspection Adjustable telescopic shaft Compact construction Window for visual contact inspection Suitable for capacitor switching and as a Main switch Handle with in-built padlockable facility in-off position.              FEATURES Modular pole design – economical maintenance  Available in interior / sheet steel enclosure version Telescopic shaft for depth adjustment Large terminal capacity suitable for aluminum lugs Provision for 2NO+2NC aux contacts

• Poles1P, 2P, 3P & 4P
• Rating25A~125A

• Rating6A~32A
• Poles1P+N, 2P

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.It’s time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.           Benefits Longer Life Extra Bright Energy Saving Environment Friendly Housing material: Premium Aluminium Heat Sink with Shatter proof opal shell of polycarbonate compound RANGE 10W & 20W LED T5 Integrated Battens - Nakshatra-P Series Housing material: PVC extruded Heat Sink with Shatter proof opal shell of polycarbonate compound RANGE 10W, 16W & 20W FEATURES Soft and Uniform light distribution without Zebra effect Modern aesthetic No harmful ultraviolet radiations Mercury free: Eco-Friendly green technology Up to 50%* energy saving Long life LED: >50, 000* burning hours Provided with built-in Short-Circuit Protection and Surge Protection

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.It’s time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.     Benefits Longer Life Extra Bright Energy Saving Environment Friendly Housing material: Powder coated white MS sheet with decorative plastic engineering end covers for TARA-M and PVC extruded channel for TARA-P RANGE 20W FEATURES Soft and Uniform light distribution without zebra effect Modern and aesthetic No harmful ultraviolet radiations Mercury free: Eco-Friendly green technology Up to 50%* energy saving Long life LED: >50, 000* burning hours Provided with built-in Short-Circuit Protection and Surge Protection

• RANGE9W

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.It’s time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output ,  C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all  your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.   FEATURES Soft and Uniform light distribution Modern aesthetic No harmful ultraviolet radiations Mercury free: Eco-Friendly green technology Up to 50%* energy saving Long life LED: >50, 000* burning hours Provided with built-in Surge Protection

• RANGE1X20W & 2X20W

C&S Electric Ltd., a leading electrical and electronic equipment manufacturer, introduces LED based energy efficient lighting products.It’s time to switch over to a new generation of lighting solutions-C&S LED. Be it homes, offices, commercial or industrial spaces, these LED lights are brighter and more efficient. Designed to deliver high lumen output , C&S LED products are ideal solution for replacing energy consuming conventional lamp based lighting products.The elegantly designed range of products meets all your necessary safety standards because of their longer life & low energy cost, the total cost of ownership is very low.   Benefits   Longer Life Extra Bright Energy Saving Environment Friendly FEATURES Soft and Uniform light distribution without zebra effect Modern aesthetic No harmful ultraviolet radiations Mercury free: Eco-Friendly green technology Up to 50%* energy saving Long life LED: >50, 000* burning hours Provided with built-in Short-Circuit Protection and Surge Protection

C&S Electric package substations are available upto 24KV. The fully equipped package substation (PSS), comprises of outdoor duty enclosure, medium voltage switchgear, distribution transformer, low voltage panel & AFPCR panel (optional) is a state of art equipment for all your power distribution requirements.The factory assembled self contained package substation is a complete weather proof solution.It only requires to connect incoming and outgoing cables and hence the site work involved is an absolute minimum.   Benefits   Complete weather Proof solution Ready to position solution Four lifting eyes for ease of lifting Minimum site work FEATURES Self contained package substation All the equipment packed in a separate compartment All compartments are individually accessible Individual Door Operated lamp for illumination purpose

• No. of digital outputs6 (D01 , DO2, D03, DO4, DO5, D06)
• Relay reset typeProgrammable (Auto/Manual)
• Programmable (DO Assignment)Yes
• Type of outputsRelay

CSFPI, Fault Passage Indicator — Earth is designed to detect and indicate Earth fault on a cable system, in RMU networks with one input / open ring arrangement. The unit will indicate a fault condition when current is detected above set trip current settings. Fault current is sensed by cable mounted sensor, which gives signal to indication unit. Sensor must be mounted on screened cable and can be retrofitted on the cable.If the Earth current exceeds programmed set current for programmed response time the fault will be indicated by red flashing LED and relay contact will be activated. Reset occurs automatically by preset time passage or by a external potential free input or by recovering of 230V AC (Not a Aux. Supply) Voltage or by manually via push button. A ‘Functional Test’ can also be carried out on field by pressing for more than 8 Sec and ‘Battery Test‘ by pressing the Push button for more than 6 Sec. The sensor for earth fault detection is a summation type current sensor and it is dimensioned in such a way that if can be mounted around all three phases of the network. Programmable parameters can be set through DIP switches which are accessible by opening the Front Cover of the CSFPI indication unit. Exit (Disable) option is available for fault detection.   Benefits Self Reset in the event of momentary fault (By monitoring current after a fault) Reset through Potential free input & AC/DC voltage recovery Reset manually by push button Reset automatically by a field configurable timer (hour). FEATURES Programmable Earth fault pickup level (wide range 10A to 100A) Indication of earth-fault by blinking of Earth-fault LED Programmable response delay for Earth-fault Up-to Two potential free contacts to indicate earth»fault. (remote indication for SCADA) Various Reset option for Fault Reset