P rocezAid , an additive that works as an recycling aid .Recycled HDPE Products often have poor shine and surface finish and is also low in strength. P rocezAid enriches with essential chemicals to enhance the entire of reprocessed HDPE products , so that its marketing...
MoldWel F to increase flow while molding large intricate parts in PP HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the...
Increased cost pressures & competition have forced processor to increase filler loading (i.e. increase the amount of fillers like Calcium Carbonate) in PVC pipes, profile etc.Often increased filler loading is associated with deterioration of the physical property of the...
Polymer Processing Aid ADDNoxTM -PPA : Anti Skid ADDNoxTM -Skid
Being a leading supplier of Masterbatches, provides a wide range of Masterbatches made of highly durable polymer additives. These additives include slip, anti-block, UV- protection, antifog, antioxidant and processing aid properties and the most ideal for thermoplastics industry....
VinTuff additive improves the interface between polar polyester resins and inorganic non polar glass fiber/ filler such as clays. Vin Industries is offering Vin Tuff Addtive for SMC/DMC& hand lay up applications. Chemical Composition VinTuff is a low molecular weight...
MoldWel R to increase flow and shine in recycled PP / HDPE Products.HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the crates at...
EliHeat is an additive which is useful in significantly reducing or eliminating preheating of polymers. Generally polymers like ABS, HIPS, Nylon, filled PP etc. are preheated for 2 to 4 hrs before processing them. This requires expensive hopper driers and electrical...
RecycloAid is helping recyclers homogenize various polymer streams, eliminate moisture, improve gloss and increase their productivity.There are two major applications of RecycloAid: Blown Film Recycling: RecycloAid benefits in Blown Film Recycling: No die build-up Enhanced...
MoldWel S to increase stiffness in HDPE molded products. HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the crates at the bottom....
MoldWel F to increase flow while molding large intricate parts in PP HDPE crates need to be stiff to prevent buckling when many crates, filled with goods and material are stacked one over another.When crates are stacked one over another, there is a lot of weight on the...
We are an ISO certified company, counted amongst the trusted manufacturer and distributors of superior quality additives for Rubber and Plastic Industries. Benefits of LamiAid™: Resins improve the adhesion of lamination with the fabric. This brings down incidents of...
Stretch cling packing is a process in which a pre-extruded tacky film is wrapped around the product such as bundle, roll, pallet load, etc. of any shape and size to impart a firm grip to the packed products.The tacky characteristics of the film helps in self adhesion of the wrap...
Manufacturers of HM-HDPE films and sheets would like to use a larger quantity of waste injection molded / blow molded HDPE. This kind of waste is cheaper and available widely. However, trying to use larger quantities of HM/HDPE film causes film to puncture or there is...
Increased cost pressures & competition have forced processor to increase filler loading (i.e. increase the amount of fillers like Calcium Carbonate) in PVC pipes, profile etc.Often increased filler loading is associated with deterioration of the physical property of the...
Vinflex reacts with moisture when it is in the process of conversion into vapour and gas. It binds with H2O molecules to form stable compounds.Applications of Vinflex Mineral filled PP compounds Pressure-less Continuous Curing Systems like micro-wave, LCM, fluid beds or hot...
Processors of plastics products, in particular those who use recycled plastics, face problems like: Fish Eyes Pinholes Silver Streaks Poor Strength Reduced Surface Finish Problem : Simply using standard desiccants does. Solution: ChamakShakti, that works great when used.Major...
For Buyer 
For Seller 
Help 
