• Used in phenol melamine resin in plywood industry.
• The major uses of phenol, consuming two thirds of its production, involve its conversion to precursors for plastics.
• Condensation with acetone gives bisphenol-A, a key precursor to polycarbonates and epoxide resins. Condensation of phenol, alkylphenols, or diphenols with formaldehyde gives phenolic resins, a famous example of which is Bakelite.
• Partial hydrogenation of phenol gives cyclohexanone, a precursor to nylon. Nonionic detergents are produced by alkylation of phenol to give the alkylphenols, e.g., nonylphenol, which are then subjected to ethoxylation.[7]
• Phenol is also a versatile precursor to a large collection of drugs, most notably aspirin but also many herbicides and pharmaceutical drugs. Phenol is also used as an oral anesthetic/analgesic in products such as Chloraseptic or other brand name and generic equivalents, commonly used to temporarily treat pharyngitis.
• Phenol is a component in liquid/liquid phenol–chloroform extraction technique used in molecular biology for obtaining nucleic acids from tissues or cell culture samples. Depending on the pH of the solution either DNA or RNA can be extracted.
• used to ward off snakes and other harmful insects and pests.

• For removal of moisture from jobs which are machined by water based coolants
• The water so removed gets settled at bottom and can be drained out

Meproche Conc Soluble Grinding Fluid:

• Semi synthetic
• Solution type
• Very good bactericidal properties
• Good rust preventives
• 2% concentration passes IS specification
• Used 4%
• Mainly for steel ball manufacturing

• Our company is offering quality Meproche C-21 rust converter, that is based on polyhydroxy organic compounds
• It is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise)
• With the chemical Meproche C-21 rust converter, pitted surfaces can be converted into a protective coat. It is supplied in two packs.
• A surface treated with Meproche C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints
• It covers approximately 70/75 square meter per Kg.

Method of application:

• Mix 50 gms of part A to 0.950 kg. of part B
• Apply on the rusted surface and leave it for 4 to 6 Hrs
• Remove rust by wire brush
• Repeat the process if necessary
• The chemical converts the balance rust into a passive state thus stop further rusting
• It provides temporary solution for rust prevention. It can later be painted or lined
• Rubber gloves should be used while handling Meproche rust converter as it is mildly acidic in nature

Note:

• The information provided is based on our experience and tests conducted by us on typical specimen
• However, the actual working conditions are beyond our control and knowledge
• Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted

• Backed by expert chemists, we are able to formulate Meproche rust preventives in conformity with international standard
• Wide range of the chemical is produced from quality raw material
• Various types of Meproche rust preventives offered by us include following

Solvent types:

Tabulated below are the solvent type meproche rust preventives, we offer:

Meproche B

• Solvent based
• Quick drying
• Gives waxy film of thickness 7 to 12 microns
• Covers 70 to 78 sq. M. Per litre
• Easily wipe able

Meproche 267

• Strong water displacement
• Fingerprint neutralizer used for indoor application
• Coverage 97 to 105 Sq. m. per litre
• Gives 7 to 12 micron film thickness
• Dries in 1.5 min.

Oil Types:

Wide range of oil types for meproche rust preventives offered by us are tabulated below:

• Meproche Light
• Thin oily consistency
• Used for indoor application
• Gives film thickness of 25 to 40 microns
• Covers 85 to 95 Sq. m. per litre
• Non drying
• Meproche Medium
• Medium viscosity
• Higher film thickness of 50 to 75 microns
• Non drying type
• Covers 58 to 64 sq.m/litre.

Meproche Extra Heavy

• Soft paste - for anti friction bearings
• Covers 3 to 6 Sq. m. per kg
• Gives a film thickness of 0.6 to 1 mm
• Non drying type.

Meproche TX

• Thixotropified oil type
• Initial greasy consistency
• Becomes very thin by heat or agitation and again sets on withdrawing heat or agitation
• High film thickness 80 / 100 microns

Non drying

Following are some of other meproche rust preventives we offer:

Meproche 155:

• Meproche 155 is water-soluble and water thin able synthetic rust preventive
• It finds application to protect iron & steels from rusting within shop and for finished packing
• There may be dripping of oil from the components in case of oil type rust preventive
• It results into exposure of the top surface and edges causing its rusting where as in case of Meproche 155 there is no dripping because it dries in 20 min or so
• Its coverage is four times than that of oil type rust preventives.