Deluxe Metal Processing Chemicals Pvt. Ltd.

Masjid Bunder, Mumbai, Maharashtra

• We are providing wide range of machining fluids oil types to our international clients
• The chemical is formulated from quality raw material
• We are a quality driven company and do its stringent checking prior to its disposal at clients end.

Meproche H-60

• Cutting oil
• Good for hard water
• Gives milky emulsion with water
• To be used at 4 % concentration
• Good E.P. Properties
• Used for drilling, turning, milling and boring

Meproche Antisep ''K''

• Specially designed coolant base for grinding bearing races / rings having high refrigerant base and e. P. Additives
• Product was specially developed for skf - pune.

Meproche Conc Soluble Grinding Fluid

• Water thinneable
• Semi synthetic - solution type
• Very good bactericidal properties
• Good rust preventives
• 2% concentration passes is specification
• Used 4% mainly for steel ball manufacturing

Meproche STG

• Transparent grinding coolant
• Good corrosion inhibitions
• Use 2 to 10% depending on application
• Fully synthetic
• Water soluble
• Suitable for centreless grinding, cylindrical and surface grinding

Oil types:

• Meproche H-60: Cutting oil, good for hard water, Gives milky emulsion with water to be used at 4 % concentration Good E. P. properties
• Used for drilling, turning, milling, boring etc.

Meproche Antisep 'K' : Specially designed coolant base for grinding bearing races / rings has high refrigerant base and is having E. P. additives - Product was specially developed for SKF, Pune

Meproche Conc Soluble Grinding Fluid: Water thinneable, Semi synthetic, Solution type, Very good bactericidal properties, Good rust preventives 2% concentration passes IS specification, Used 4%

Mainly for steel ball manufacturing

Meproche STG: Transparent grinding coolant, good corrosion inhibitions Use 2 to 10% depending on application, Fully Synthetic, water soluble, suitable for centreless grinding, cylindrical and surface grinding

Meproche Dewatering fluid:

• For removal of moisture from jobs which are machined by water based coolants
• The water so removed gets settled at bottom and can be drained out

Meproche broaching oil:

• For high heat removal good swarf removal capacity
• Imparts very good surface finish Non Inflammable

Meproche honing oil:

• Specially designed coolant
• Very thin consistency

Used for honing compounded with rust inhibitors, wetting agents, anti oxidants and water repellents

Meproche drawing oil 431:

• Thick consistency Used for wire ropes
• Removes heat and lubricates the die gives good surface finish

Meproche TTL:

• A synthetic lubricant: Used for processing nonferrous metals
• Does not leave any film or soot after annealing
• Used for extrusion / drawing of sections

• Quenching, Marqueching & Tempering Salts & Oils.
• Meproche MQ 540 : Working range 540 C to 700 C
• Used for quenching and tempering high speed steel and hot working steels used for dies, punches, mandrels etc. after heating in MH 970 / 971. Also used for secondary hardening. When the bath becomes sluggish and regenerator to keep the bath clean
• Meproche MQ 495 : Working range 495 C to 700 C
• Specially developed salt to consume less energy. Has lower melting point
• It is used for quenching and austempering.
• Meproche MT 150 : Working range 150 C to 270 C
• Used for tempering steels after hardening to reduce brittleness in the hardened steels and remove the internal stresses caused by the sudden cooling in the quenching bath
• Jobs after cyaniding should not be quenched directly in MT 150 as it reacts violently with cyanides
• Meproche MT 220: Working range 230 C to 350 C
• This salt is very stable and melting point or working range does not change after repeated uses, therefore martempering & isothermal quenching can be carried out very efficiently
• It reacts violently with cyanides
• Meproche Quenching Oil: Mineral oil based with low viscosity and high oxidation stability
• Compounded mineral quenching oils are widely used as they result into good proportion of hardness and toughness and give least warpage with standard steels