Our Products
Leading Manufacturer, Supplier & Retailer of Insulation Reflective Sheets.
Since inception, our company has upheld its policy to make timely delivery. Thus, we guarantee to deliver products to buyers doorsteps on the dates promised. Raw materials that we use for the production of the finished products are bottleneck assets and thus are highly essential. We strictly check the entire lot of raw materials before procurement.
Hi-Roof Make Cross Linked Poly Ethylene Technical Data Sheets
| Property | INSUshield Typical Values | Test Method | ||
|---|---|---|---|---|
| Material Description | Fire retardant, closed cell, chemically crosslinked polyethylene | |||
| Material Form | Rolls, sheets and tubing | |||
| Application | Thermal & Acoustic Insulation | |||
| Area of applications | A/c Humidification ducts, 'Spandrel insulation, Underdeck, Hot & Cold water pipelines & acoustic flooring |
|||
| Operating Temperature | -40 oC to + 115oC | |||
| Thermal Stabilty | Less than 5% shrinkage at 90oC for 24 Hours | |||
| colour | Grey | |||
| Nominal Density (Kg / m3) | 33±3 Kg/m3 | BS4370 Part 1 | ||
| Thermal Conductivity (W / mo K) | Mean Temperature (oC) | W/moK | K cal / hr m oC | IS : 3346 / 1980 |
| 0oC | 0.0318 | 0.0273 | ||
| 23oC | 0.0328 | 0.0282 | ||
| 45oC | 0.0383 | 0.0329 | ||
| Water Absorption | <2% | ASM D 1056-98 | ||
| Water vapour permeance (28 days) | <6x103 ng/Pa m5 | ASTM E-96 | ||
| Water Vapour Transmission | ||||
| (7 days) | Negligible | |||
| (28 days) | <1100 µg /m2S | |||
| Water Vapour Resistance Factor (µ) | Plain | >11000 | DIN 52615 | |
| Aluminium foil face one side | >14000 | |||
| Tensile strength (N/m2) | Min. 25 | BS 4370 Part 2 | ||
| Dimensional Stability (RH-60%, Temp 35oC for 24 hrs,) |
No Visible Changes Observed | BS 4370 Part 1 | ||
| Volume perentage of closed cel | >90% | BS 4370 Part 2 | ||
Comparison Of Insureflector With Fiberglass
| Parameters | Insureflector (Insufoam & Insubble) | Fiber Glass |
|---|---|---|
| Working base | Reflectivity | Condensivity |
| Fire charactereristics | FR Grade Class"I" & Class"O" | Non FR |
| Tensile Strenth. | Excellent | No tensile strenth as it is loose fibres |
| puncture & tear resistance | Excellent | no resistance |
| Chemically inert | Unaffected by alkalis, alcohols, detergents, petrochemical products & most acids |
affected by chiemicals |
| Non-Fibrous | Non irritant | irritant |
| Installation | Easy | Time Consuming |
| Economical | Expensive | |
| Non Toxic | Non toxic | Toxic |
| Non fungus | Antimicrobial | Poor |
| Ease of Use | Not required any type of extra support like wire mesh or additional fasteners |
Required wiremesh and fasteners to install |
| water absorption | Not absorb | Very high as it is loose fibers |
| weight | Low weight cause less weight on structure |
More weight |
| Life of Product | Very long | Limited |
| surface finish | Smooth & uniform | Saggy |
| Pricing | Lower than Fiber Glass | Wiremesh & fastners charged extra |
Mr. Mahendra Kamli (Dibishree Engineering & Fabrication)
Plot No. 1225, Opp. Lalji Mulji, Transport GIDC, Sarigam, Valsad, Gujarat - 396155, India
Share us via
