• round shape colloid mill body, base and top cover made out of ci material having ss cladding in vertical type standard model, suitable for pharmaceutical, veterinary and ayurvedic industries.
• ss fabricated square body on which machine and motor both are mounted, in vertical type deluxe model.
• all contact parts are made out of stainless 304 material. (ss 316 optionally)
• circular ring shaped, internally conical stator having two different tooths stages.
• toothed conical rotor directly coupled with the motor shaft in vertical standard model and coupled with belt in vertical deluxe model.
• stator & rotor assembly is balanced and housed in the stainless steel housing.
• grinding accuracy of 5 10 micron due to the perfectly matched & specially designed conical shaped stator & rotor assembly.
• extended bearing housing specially designed to facilitate fine adjustment of bearing clearances of backlash to avoid metal contact of rotor in vertical deluxe model.
• special designed adjustment of the grinding gap by an exterior screw by means of two handles even during the operation.
• three-way cock system for draining and re circulation of liquids provided as standard, in water-jacketed models.
• extra discharge spout provided as a standard for viscous material.

• General structure made out of SS304 and Polished to the matt / mirror finish (as required by customer) in GMP Model.
• The conical shape at both ends enables uniform mixing and easy discharge.
• Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
• All contact parts are made out of stainless 304. SS 316 quality material (as required by customer).
• As per customer requirement machine will be provided with left side drive or with right side drive.
• All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Manual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch.( In 200 Kg & above model )
• Maximum care has been taken to ensure safe operation of the unit.
• Two nos. of safety rod will be provided at back side. ( One LH side & one RH side )
• Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with open able cover provided at other end of the cone for material charging & cleaning.
• One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
• Cone will be mirror polished from the inside & outside & structure will be matt polished.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. starter, digital timer & Amp. Meter.
• The conical shape at both ends enables uniform mixing and easy discharge.
• Inside & outside of the cone will be polished to the mirror finished.
• Hand wheel will be provided for manual tilting of cone.

• Simple design & easy accessibility of all machine components for servicing and maintenance. Easy and quick change over within 15 minutes.
• The operating cycle of this machine is automatic and the use of continuous motion principle permits high speed and efficient packaging production.
• Low noise and Low energy consumption.
• Batch code Printing unit provided as standard accessories.
• Conveyor belt 5 feet provided, as standard accessories, to move blister strips up to packing machine.
• Combo Packs are possible for better utilization of capacity and packaging materials. It is dependant on tablet, strip and pack size
• EDGE TO EDGE CUTTING to eliminate trim waste between packs in single & individual pack. Only 2 mm trim waste in combo pack.
• The speed of the machine & vibrator is variable. Superior blister quality at all speeds.
• Uniform heating and uniform forming by contact heating system by Aluminium Teflon coated heater roll.
• Compact design requires less floor space.
• Standard model does not require compressed air.

• the octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules, result in good quality.
• suitable for dry mixing of products in granule form.
• easy for loading and unloading of material.
• easy for cleaning.
• all contact parts are made out of ss 304 .
• ss 316 quality material (as per customer requirement).
• simple design requires minimum maintenance.
• general structure & safety guards made out of mild steel & coloured in standard model and made out of ss 304 & polished to the matt finish in gmpmodel.
• maximum care has been taken to ensure safe operation of the unit.
• manual rotating facility with hand wheel for inching.
• bigger size batch at low power consumption.

• Special design feature of machine & stirrer, the mass mixer can be mix the sticky materials & also uniformally and intimately mix the materials which are to be difficult to mix.
• Range of models to suit working volume 50, 100 & 200 Kg. At bulk density of 0.50 gm/cc.

• All contact parts are made out of S.S.304 quality material. (SS316 provided on demand on extra cost)
• Compact design requires comparatively smaller floor space.
• Single stirrer with single speed for dry & wet mixing.
• As stirrer's sealing comes in contact with product, there may be any black particle contamination problem, after sealing bush got wear & tear.
• All non contact parts (general structure)made out of mild steel and claded with SS304 or crome plated or made out of SS304 in GMP Model. Contact parts are polished to the mirror finished and non contact parts are polished to the matt finished in GMP Model. All safety guards & covers made out of SS304 material in GMP model & made out of mild steel & painted in standard model.
• General structure & all non contact parts are made out of Mild Steel & same will painted in Standard Model.
• All moving parts are enclosed with safety guards.
• Thrust bearings are provided to carry out rigid thrust load.
• Easy for cleaning & operating.
• Simply designed SS304 dust cover provided with one port for material charging & inspection.
• Interlocking system with top dust cover, to avoid accident, during process.
• The container tilting system provided for easy unloading of material and easy cleaning.
• Specially design all moving parts provided with provision of easy lubrication.

• The standard pan is elliptical in shape, mounted at 30 angle.
• RPM of the pan is variable. with help of the variable speed pulley.( A.C. Drive provided optionally )
• Inbuilt hot air blower system as a standard supply up to 48'' size (Excluding 60'' & 72'' size) & high capacity mobile hot air blower system also provided (as a optional) with temperature controller to control the temperature of air at selected temperatures between 30C to 75C is provided with air delivery pipe to deliver required quantity of air in the pan.

Special Features

Optional

• it allows smooth mixing without deforming the particles or a strong mixing by breaking the lumps
• simple design requires minimum maintenance.
• suitable for dry mixing of products in powder form.
• easy for loading and unloading.
• all contact parts are made out of ss304 where ss316 or ss316 l quality material is provided as per customer requirement.
• general structure & safety guards made out of mild steel & painted in standard model and made out of ss304 & polished to the matt finish in gmp model.
• maximum care has been taken to ensure safe operation of the unit.
• manual rotating facility with hand wheel for inching.
• easy for cleaning.

• Made out of rigid angle iron frame with double walled panels insulated with compressed fibre glass and with a rigid door fitted with strong hings and best choosen locking arrangement.
• A control panel is fixed to facilitate the operation easily.
• Manufactured from mild steel & in good finishing outside with synthetic enamel colour & inside painted with heat resistant paint to resist temperature up to 300 degree, in Standard Model.
• Manufactured completely from SS304 or SS316 (As per customer requirement) in GMP Model & polished to the mirror finish from inside & matt finish from outside.

• Highly effective with recirculating air.
• The heated air, is recirculated with fresh air in selected proportions for optimum drying of the materials at the top & the bottom dry simultaneously.
• Uniform air circulation.
• Controlled temperature.
• Sturdy construction and large working space are the valuables of the oven
• Suitably designed to cover wide temperature range,
• Loading and unloading is faster and simple.
• In higher capacities trays trolley rolls in and out of the chamber. For continuous operation a spare trolley can be had for loading while the drying cycle is taking place.
• Digital temperature controller with digital timer are supplied to facilitate working day and night in electrically heated model.
• In steam & thermic fluid heated model, digital temperature indicator is provided with digital timer , but the temperature controller is not supplied with the machine.

• uniformity in drying and reduction in drying time.
• atmospheric inlet air is filtered by means of non woolen filter cloth. Pre /micro v & hepa filters can be provided on demand on extra cost to prevent any fine dust to pass through the products.
• digital temperature indicator cum controller for inlet air & digital temperature indicator for outlet air, are provided for electrically heated model.
• digital temperature indicator are provided for inlet & outlet air, in steam / thermic fluid heated model. (temperature controlling valves will be in customer scope of supply)
• manually operated air dampers provided to control the inlet and outlet air flow.
• an explosion safety flap of adequate capacity at the rear of dryer and an earthing point to prevent static charge in the machine.

• double wall puf insulated ahu with pre /micro v & hepa filters and cooling coil can be provided on demand on extra cost.
• pneumatic system for lifting of product container ( in 3 pieces design ) & finger bag shaking with butter fly valve.
• flameproof motor with weather proof / flameproof enclosure for operating panel. (it is recommended in steam heated model only. Power panel should be mounted out side the flameproof area.)
• safe earthing arrangement with low voltage relay.
• solid flow sensor monitor for monitoring the leakage in the air discharge filters.
• differential pressure gauges or differential pressure trans-meter across the air discharge bag, inlet air filter and container sieve.
• "plc" based power panel with "mmi"/ touch screen based operating panel with printer port facility for process automation.
• extra product container with trolley for more utilization of machine.
• online sampling port at product container for sampling of material without shut- off the machine.
• food grade silicon gasket set.
• facility of mounting of blower with motor & heating chamber with air filteration unit out side the granulation room.
• contact parts made out of ss 316 or ss316 l instead of ss304.
• pneumatically operated inlet and outlet dampers.
• silencer to reduce the noise level of exhaust air.

• GMP point of view, Communiting Mill is provided with SS cladding on base, belt guards and cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated.
• Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator.
• Swing type beaters assembly is provided as a standard supply, which increases the output by 10 to 30% and is easy to clean.
• Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splined shaft.
• Transmission of heat to the chamber from the bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
• Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life.
• Castors are provided for mobility and brakes can be applied for fixing machine at one place.
• Communiting mill is available in plain & water jacketed type, the most suitable for pharmaceutical industry. Flameproof electricals can be provided on demand at extra cost.

• Conical shape bottom of the machine.
• Material discharge cock ( 2 Size or bigger size if specified ) at centre of the conical bottom is provided.
• Paste Preparation Vessel would be with top loose open-able cover and 04 nos. of legs with castor wheel ( if electrically heated ) and with fix plate ( if steam heated ).
• Jacket ( Water Jacket OR Steam Jacket ) made from M.S. / SS304 as per customer need.
• Jacket insulated with mineral wool & covered with M.S. or Aluminum or SS304, as per customer need.
• Vessel with tank mounted stand for geared motor. Geared Motor mount on the stand and covered.
• Slow speed stirrer (Anchor type ) with geared motor for mixing of the paste.
• Inelectrically heated model, Electrical heaters with temperature controller is given.
• Operating panel provided with vessel.
• Outside surfaces will be insulated with SS304 and inside surface will be polished to the mirror finished.

• The equipment is equipped with one cone type container which is provided with clamping hooks to clamp the FBD bowl, rubber gasket for air tight fitting between FBD bowl and cone type container.
• The container is also have a butterfly valve at bottom to drain the material in required IPC or any other container.
• The hydraulic system (power pack unit with cylinder) is provided to lift the complete assembly with FBD bowl and tilt the pair of cone type container and FBD bowl at 180 degree.
• . Lift the whole assembly with FBD bowl at a desirable height. With help of hydro- mechanical system tilt the whole assembly at 180 degree.
• GMP point of view machine provided with S.S. Cladding base & S.S. Guards / Cover. No exposed paintedsurface. Hydraulic power pack is also covered with SS 304 cover.
• Very less material transfer time making the next operation earlier & save time and dust free system saveenvironment of working area. The system can be operate by single operator.
• Contact parts SS304 provided as a standard. SS 316 / SS 316 L can be provided on demand

• The equipment is equipped with one jaw having clamping hooks to clamp the IPC.
• The hydraulic system (power pack unit with cylinder) is provided to lift the complete assembly with IPC.
• With help of the hooks first clamp the IPC with jaw of the Lifter. Lift the whole assembly with IPC at a desirable height. Finally height can be adjust as per requirement to transfer the material which are in the IPC. Discharge the material in other container or any other hopper, with help of butterfly valve which is provided at discharge of IPC.

• GMP point of view equipment provided with S.S. cladding base, SS guards, SS cover on motor. No exposed painted surfaces on top of the machine. Hydraulic power pack is also covered with SS304 cover. (In GMP Model )
• Dust free system save environment of working area. The system can be operate by single operator.
• Contact parts SS304 provided as a standard. SS 316 can be provided as a optional facility on customer demand.