By the design of flange-mounting structure, Goodrive300-02 inverter, a special product developed according to the application features of textile industry, can effectively avoid foreign objects such as cotton fiber, dust and oil causing secondary pollution to the inverter and improve the temperature in the electrical cabinet and air ducts.

Goodrive300-02 inverter uses the design against cotton fiber blockage and it can run reliably for a long term at the high temperature of 50^oC

Features

• Flange-mounting will avoid external cotton fiber, dust and oil causing secondary pollution;


• Based on the application features of textile industry, the special design of cooling structure can prevent cotton fiber from covering and blocking the radiator; the fans of electrical circuit are easy to clean and replace;


• Metal casing design for all series adopts aluminum radiator in large size, so the inverter can run reliably for a long term at the environment temperature of 50^oC


• All series support common DC bus;


• Nonstop function at instantaneous power loss;


• Standard MODBUS communication, optional Profibus-DP, CANopen and Ethernet communication.

INVT Goodrive100-01 Variable Frequency Drive is positioned in environmental-friendly and economical PV market, the product is applicable to PV pump system, replaces water storage with electric storage and needs no battery modules. The direct current generated by solar modules is input to the inverter and then converted into the alternating current to drive various pumps directly. Additionally, the output frequency is adjustable in real time according to sunlight intensity change.

DB100 is the latest Universal AC servo system produced by Invt KINWAY in 2012. Power range: 200W 5.5Kw, through pulse and analog quantity signal to control and through technology to break continuously to significantly enhance the performance of the products, that can meet the functional requirements of the universal industrial machine.

Features

• Strong overload: the instantaneous torque up to three times overload, effectively overcome inertia moment of inertia loads at the moment of starting.


• Built-in mechanical resonance suppression function can effectively suppress the resonance phenomenon of mechanical structure .


• Excellent high-speed reflect performance: speed response bandwidth is more than 650Hz, the speed is from -3000r/min to 3000r/min. The acceleration time is just 6ms.


• A full range of models are built-in braking unit and braking resistor.


• 1kw servo drive can be directly 380v power supply to save into line transformer, reduce program costs.


• With automatic gain adjustment function that can be load inertia identification. The debugging is more convenient.

MH500 series electro-hydraulic servo system is developed on the basis of in-depth research on injection molding machine technological process and parameters. It adopts control software algorithm to meet the particular technical demand of injection molding machine so as to increase the energy efficiency of the machine and ensure the high precision of plastic products. It feature excellent energy-saving effect and quick response depending on many distinctive technologies, such as PQ decoupling control plan, multi-step PID control, multi-pump combined algorithm and dual-displacement plunger pump. Considering injection molding machines vary in model, quantity of flow and tonnage, H500 series electro-hydraulic servo system offers four solutions to meet the requirements of users, i.e. single pump control system, multi-pump combined control system, multi-pump compound control system and multi-pump multi-mode control system. H500 series electro-hydraulic servo system can be widely applicable to various types of hydraulic system and injection molding machine energy saving reconstruction.

EandA Control ML500 rapier loom main shaft servo (also known as super motor) uses permanent magnetic synchronous motor specifically developed for starting and stopping working condition of loom, which has the characteristics of correct orientation, quick start-up and convenient speed regulation. Comparing with original mechanical transmission system, it saves reduction gear box, and simplifies mechanical transmission level, meanwhile, it also reduces the malfunction generated due to mechanical tear and wear, and improves the reliability of the system, which can save energy by 10%20% than conventional asynchronous motor system, and meet the requirements of upgrading rapier loom.

IVC1 series PLC features small sizes and high performance in automation control. It has a built-in microprocessor, core computing control system, as well as input points, output points, expansion module buses, etc; this series also includes I/O extension module and special module; the main module has two communication interfaces; the main module I/O also has high-speed counting and high-speed pulse output channel to achieve precision positioning; it has a wealth of built-in programming resources and three standard programming languages, and supports debugging monitoring via Auto Station programming software; it also has an effective user program safety protection system.

Features

• Compact structure, excellent functions and cost-effective;


• Applicable to chemical fiber fabric, machine tool, wire cable, foot and beverage, packaging, plastic, and building machinery.

This controller is a perfect fit for the food industry- with its IP66 rating, this unit is ideal wherever spray/wipe down applications apply. A wide variety of on board I/O options can be added by simply snapping a module onto the back of the PLC.

• NEMA4X/IP66/IP65 (When panel mounted)


• Fully Flat Fascia


• 12.1 Color Touch screen, 64K Colors


• Up to 1000 I/O; Supports Remote I/O


• Digital, Analog, Temperature, Weight


• Autotune PID 24 loops


• 2MB Logic, up to 500 Images (32MB)


• Cellular Communication- SMS, GPRS


• Ethernet, Canbus, RS485, MODBUS RTU/IP, CANopen, J1939, SNMP


• Web Server, send emails & attachments


• SD Card, Datalogging, Recipes & Cloning


• Built in Trends, Alarms, & Multilanguage Support

The Vision1040 is a powerful PLC with a built-in HMI Operator Panel comprising a 10.4 color touch-screen and nine programmable function keys. On-board I/Os can be added by simply snapping a module onto the back of the PLC; Snap-in I/O Modules come in several configurations. I/O Expansion modules enable integrating up to 1000 I/Os per Vision PLC.

• Up to 1000 I/O; Supports Remote I/O


• Digital, Analog, Temperature, Weight


• 10.4 Color Touch screen, 64K Colors


• Autotune PID 24 loops


• 2MB Logic, up to 500 Images (32MB)


• Cellular Communication- SMS, GPRS


• Ethernet, Canbus, RS485, MODBUS RTU/IP, CANopen, J1939, SNMP


• Web Server, send emails & attachments


• SD Card, Datalogging, Recipes & Cloning


• Built in Trends, Alarms, & Multilanguage Support

The Vision570 is a powerful PLC with a built-in HMI Operator Panel, comprising a 5.7 color touchscreen display. On-board I/Os can be added by simply snapping a module onto the back of the PLC; Snap-in I/O Modules come in several configurations. I/O Expansion modules enable integrating up to 1000 I/Os per Vision PLC.

• Up to 1000 I/O; Supports Remote I/O


• Digital, Analog, Temperature, Weight


• 5.7 Color Touch screen, 64K Colors


• Autotune PID 24 loops


• 2MB Logic, up to 500 Images (12MB)


• Cellular Communication- SMS, GPRS


• Ethernet, Canbus, RS485, MODBUS RTU/IP, CANopen, J1939, SNMP


• Web Server, send emails & attachments


• SD Card, Datalogging, Recipes & Cloning


• Built in Trends, Alarms, & Multilanguage Support

PowerFlex 753 AC Drives are cost-effective and easy to use in general purpose applications requiring safety features. They come standard with built-in I/O, which is ideal for machine builders and system integrators who want to reduce engineering costs, deliver machines to market faster, and meet end user demand for more productive machines. Select size-optimized drives for low-power applications where you have limited space available. The Dual-port EtherNet/IP Option Module offers flexible, cost-effective methods for leveraging EtherNet/IP networks.

Features

• IP00/IP20 NEMA/UL Type Open, flange mount, IP54 NEMA/UL Type 12


• Dual-port EtherNet/IP Option Module helps you leverage EtherNet/IP networks, minimize the number of managed switches, and reduce cabling needs when using Device Level Ring (DLR) networks


• Automatic Device Configuration (ADC) allows Logix controllers to detect a replaced drive and download all configuration parameters automatically


• V/Hz control, vector control with FORCE technology, sensorless vector control, and permanent magnet motor control


• Predictive diagnostics to extend the life of cooling fans and relay outputs


• Slot-based architecture provides three option slots for feedback, safety, communications, additional I/O, or an auxiliary power supply


• Configuration and programming via integral LCD Human Interface Module (HIM), DriveTools SP software, or Connected Components Workbench software

PowerFlex 523 AC Drives are cost-effective and ideal for standalone machines. These drives provide an innovative, modular design that supports fast and easy installation and configuration. In addition, they offer USB programming, application-specific configuration, and flexible mounting options. PowerFlex 523 AC drives offer a power rating of 0.2.22 kW (0.25.30 Hp) with global voltage classes of 100.600V. They support a wide range of motor control, offer a compact footprint, and operate at temperatures as high as 70 C (158 F).

Features

• Modular design features an innovative, removable control module that allows simultaneous wiring, installation and software configuration


• Offers a wide range of motor control, including volts per hertz, sensorless vector control, and sensorless vector control with Economizer mode


• Supports low-cost networking through an integrated RS485/DSI port


• Lets you upload and download configuration files quickly and easily through a USB connection


• Integral LCD human interface module (HIM) supports multiple languages and features descriptive QuickView scrolling text


• Helps you reduce energy costs with Economizer mode and energy monitoring features


• IP20 NEMA/UL Type Open, IP30 NEMA/UL Type 1 (with optional kit), DIN rail (frames A, B and C)


• Helps simplify configuration through parameter groups in the AppView for applications like conveyors, mixers, pumps and fans


• CustomView configuration helps speed machine commissioning with your own defined group of parameters


• Drives operate in ambient temperature range of -2050C (-4122F), or as high as 70C (158F) with current derating when using a control module fan kit


• Offers side-by-side mounting with 50mm (1.96 in) air-flow gap at the top and bottom of the drive

ControlLogix systems use a common control engine with a common development environment to provide high performance in an easy-to-use environment. Tight integration between the programming software, controller, and I/O modules reduces development time and cost at commissioning and during normal operation. You can perform standard and safety control in the same chassis for a truly integrated system. Leverage the high-availability and extreme environment capabilities to meet your application needs.

Features

• Provides premier high-speed, high-performance, multi-disciplined application control


• Provides fully redundant controller architecture with bumpless switchover and high availability


• Provides modular and scalable network communications


• Offers broadcast range of communication and I/O options


• Provides time-synchronization capabilities for first fault, process sequencing and other applications


• Offers select products that are TV-certified for use in SIL 2 and SIL 3applications

GuardLogix Integrated Safety Systems provide the benefits of standard ControlLogix systems, plus safety features that support SIL 3 safety applications. GuardLogix safety controllers offer integrated safety, discrete, motion, drive and process control, as well as seamless connectivity to plant-wide information systems, all in the same controller. Use EtherNet/IP or ControlNet networks for safety interlocking between GuardLogix controllers. Connect field devices over EtherNet/IP or DeviceNet networks.

Features

• Provide safety and integrated motion in the same chassis


• Offer TV certification for SIL 3 functional safety (controller and safety partner required)


• Support Integrated Motion on EtherNet/IP", integrated Sercos" motion, and analog motion


• Support safety communications via EtherNet/IP, ControlNet", and DeviceNet" networks


• Support multiple controllers in the same chassis, with each one operating independently

Our GuardPLC Safety Control Systems offer superior speed in PLC throughput and network functionality. These controllers meet worldwide PLC standards and global standards for functional safety. This family is ideal for sensing speed, direction, zero-speed, temperature, pressure and flow applications. These controllers communicate on a Safe Ethernet communications network that is TV-certified for use in safety applications up to EN954 Category 4 and SIL 3.

Features

• Integrates easily into a standard control system


• Communication options include GuardPLC" Ethernet (proprietary protocol), EtherNet/IP", Modbus, Profibus and ASCII


• Offers a single-wire Ethernet solution, running distributed safety I/O on GuardPLC Ethernet while communicating to standard PLCs and HMIs on EtherNet/IP


• Offers TV-Certified Function Blocks, application-specific instructions that you can use in a GuardPLC controller's application program


• Includes embedded safety inputs, outputs, and multiple communication options


• Supports several types of on-board and distributed I/O, high-speed counters, analog inputs and outputs and dry contact safety relays

Bulletin 1785 PLC-5 programmable logic controllers (PLCs) offer flexibility in programming, network, and I/O. Designed for larger sequential and regulatory control applications with specialized I/O requirements, PLC-5 control systems bring together existing and new systems through networks such as EtherNet/IP, ControlNet, and DeviceNet. Embedded network ports in PLC-5 controllers enable connectivity to a wide range of devices including MicroLogix, SLC 500, CompactLogix, and ControlLogix controllers, letting you expand your control system without additional training investments.

Features

• Reliability with a Mean Time Between Failure (MTBF) rating that exceeds 400, 000 hours


• 6 K words through 100 K words user memory

Backup options:

• ControlNet" Hot Backup module provides control of outputs if the primary controller shuts down


• PLC-5 Backup Communication module helps increase the fault tolerance of systems controlling I/O on a remote I/Olink

I/O support:

• Monitor and control I/O across ControlNet, DeviceNet", and Universal Remote I/O links


• Forcible I/O ranges from 512 through 3072 I/O


• Maximum remote I/O locations ranges from 5 through 125

Communication ports:

• On-board ports for DH+, Universal Remote I/O, and RS-232-C/RS-422-A/RS-423-A communication


• Ethernet or ControlNet dual-media ports included on some controllers


• Separate modules provide additional communication ports

Our Micro800 Control Systems are easy to install and maintain. One software package applies to the entire family. These systems offer just enough control for your lower-cost, stand-alone machines. You can buy only the functionality you need, and use plug-in modules to personalize your system for specific application needs.

Features

• Offers a wide range of small-size controllers (10.48 points) optimized for specific tasks


• Plug-ins add communication ports (DeviceNet, serial ports) and I/O (digital, analog, HSC) without increasing the footprint of the controller


• Up to 3 Axis velocity and position control using pulse train outputs (PTO) with Micro830 and Micro850


• Embedded Ethernet provides connectivity to PC, HMI, and other devices with Micro820" and Micro850


• Micro810controller supports 12 I/O points with 4 high current relay outputs (8A) for smart relay applications


• Micro820 controller supports up to 36 I/O points with many embedded features such as Ethernet, microSD slot for recipe and data log, analog I/O


• Micro830 controller supports up to 88 I/O points with high performance I/O, interrupts, PTO motion


• Micro850controller supports up to 132 I/O points with same capabilities as Micro830 plus embedded Ethernet and 2085 expansion I/O

For a proven, small programmable logic controller solution, look to our MicroLogix family. The MicroLogix 1000 controller offers control capabilities in an affordable, compact package. The MicroLogix 1200 provides features and options to handle extensive range of applications. The expandable MicroLogix 1500 controller helps you achieve high-level control in a variety of applications. The MicroLogix 1100 and 1400 controllers increase the application coverage with enhanced network communications at an affordable price.

Features

• Five levels of control available, providing a wide variety of features to suit most applications


• Offers similar functionality as traditional SLCs and PLCs, only in a smaller, packaged form factor


• Compatible with our PanelView" Component graphic terminals


• Shares common RSLogix" 500 programming software and RSLogix Micro programming software, providing an instruction set that is common to the MicroLogix" and SLC" 500 controller families

The Pico family of programmable logic controllers offers a practical solution that is easy on your budget. The standard Pico controllers are small, simple and flexible. They fit a wide variety of applications. The PicoGFX controllers offer graphical, multi-function displays and options for inter-connectivity. These controllers lead the Pico controller family in flexibility and capability.

Features

• Flexible installation


• Easier programming


• Expanded control with simple HMI


• Inter-connectivity among PicoGFX" controllers via Pico-Link network


• Modularity


• Increased capacity available through expansion I/O modules


• User-friendly, intuitive programming software

Our Bulletin 1768 Compact GuardLogix Safety Controllers is a CompactLogix controller that also provides safety control. As part of the Logix family, Compact GuardLogix controllers use a common control engine with a common development environment to provide high performance multi-discipline control for SIL 3 safety applications. GuardLogix Safety PACs offer integrated safety, discrete, motion, drive and process control, as well as seamless connectivity to plant-wide information systems, all in the same controller. Use EtherNet/IP or ControlNet networks for safety interlocking between GuardLogix controllers. Connect field devices over EtherNet/IP or DeviceNet networks.

Features

• High functionality in an economical platform


• Provides system-wide integration of standard and safety control


• Compatible with ArmorBlock Guard I/O" or CompactBlock" Guard I/O modules for field device connectivity on EtherNet/IP" or DeviceNet" networks


• Supports safety interlocking between GuardLogix controllers over EtherNet/IP or ControlNet" networks


• Integrated safety and motion capabilities in a single controller

Our SmartGuard 600 family provides safety for applications that require complex logic and more advanced safety functionality. With the SmartGuard 600 controller as a safety master on DeviceNet, you can use Guard I/O modules to expand the number of safety devices the SmartGuard 600 can control. With your choice of EtherNet/IP or DeviceNet, other devices such as standard PLCs and HMIs can read data from the SmartGuard 600 safety controller for system-level interlocking, diagnostics and troubleshooting.

Features

• Includes small, cost-effective intelligent safety controllers


• Leverages several types of embedded and safety I/O modules


• Lets you use the DeviceNet" network to distribute safety I/O and integrate into a standard control system


• Ideal for mid-level safety applications that are too complex for safety relays, yet too simple for full-sized safety PLCs


• Supports controller configuration and programming through RSNetWorx" for DeviceNet software

Bulletin 6181X Hazardous Location Integrated Display Computers are rated ATEX Category 3 (for gas and dust) and UL listed for Class I Division 2 hazardous locations. These panel-mount computers are rated for extreme environments. The 12.1 in. TFT color display offers resistive touch and readability in sunlight.

Features

• Meets ATEX and UL certifications required for hazardous locations


• Operates in -20.70 C (-4.158 F) temperature range


• Ships with 8 GB solid-state hard drive


• Includes one CompactFlash and one half-length PCI expansion slot


• Includes cloning utility for system backup and restore


• Includes diagnostic utility for hardware analysis and system troubleshooting


• Available for either Windows XP Professional or Windows 7 operating systems