Product / Services
Post Buy Requirement
EP
Eastern Petroleum Private Limited
Mumbai, Maharashtra, India
Add Review
Call Now

Our Products

  1. Industrial Chemicals 3 Products available
  2. Inorganic And Organic Solvents 3 Products available
  3. Lubricants 7 Products available
  4. Oil And Lubricants 46 Products available
  5. Others 25 Products available

Oil And Lubricants #5929483

gear oil

Gear Oil
Gear Oil Extra EP 80W-90 and 85W-140Gear Oil extra ep 80W-90 AND 85W-140 are high performance, multipurpose, thermally stable and heavy duty automotive gear lubricants. Gear Oil are blended from highly refined base stocks with high performance EP additive system for providing excellent load carrying capacity to protect gear equipment against surface distress (i.e. spalling, pitting, scoring and wear) under heavily loaded conditions. Special inhibitor system has also been incorporated to provide excellent oxidation stability to resist gear oil degradation and thickening during long periods of severe high temperature operations. High viscosity index and low pour point assure good film strength for gear oil protection at both high and low temperatures.
Gear Oil EP 90 (GL 2)Gear Oil Ep 90 (GL2) are high performance, multipurpose, thermally stable and heavy duty automotive gear oil lubricants.
View Complete Details
Ask Latest Price & Details
Antiwear Hydraulic Oil

Antiwear Hydraulic Oil
  • GRADES: VG 32, 46, 57*, 68, 100 AND 150
Hydraulic Oil (Antiwear)
Introduction of Hydraulic Oil (Antiwear):Hydraulic Oil Antiwear are blended from highly refined base stocks with high viscosity index and specially selected anti-oxidant, anti-corrosion, anti-wear, anti-rust and anti-foam additives. Hydraulic Oil Antiwear can sustain very high pressure of the system and high speed of the pumps, and compatible with the seals normally used in the hydraulic system.
Application of Hydraulic Oil (Antiwear):Hydraulic Oil Antiwear are recommended where long service life and a wide variety of industrial hydraulic and circulation systems are required.
Performance Level of Hydraulic Oil (Antiwear):IS 10522:1983 [Reaffirmed November, 1998]

Typical Properties of Hydraulic Oil (Antiwear):
CHARACTERISTICS Hydraulic Oil Antiwear
32 46 57 68 100 150
KV at 40°C 30 - 34 44 to 48 54 - 60 66 to 70 95 - 105 145- 155
VI, Min. 95 95 95 95 95 95
Flash Point, COC, °C. Min 190 210 210 210 210 210
Pour Point, °C. Max. -6 -6 -6 -6 -6 -6
 

View Complete Details
Ask Latest Price & Details
Machine Tool Way Oil

Machine Tool Way Oil
  • GRADES 32, 68, 100 & 220
Introduction of Machine Tool Way Oil:Machine Tool Way Oil 32, 68, 100 & 220 are blended from highly refined base stocks with excellent oxidation stability and are incorporated with oiliness, anti-wear, non-drip and anti-foam additives. The above combination enables the products to carry higher load of machine tools with minimum stick-slip, chatter and improved surface finish to the job. These grades also protect the parts against rust and corrosion with reduction in the consumption of oils.
Application of Machine Tool Way Oil:Machine Tool Way Oil 32, 68, 100 & 220 are recommended for slide way lubrication of planers, grinders, shapers by horizontal and vertical guide ways

Typical Properties of Machine Tool Way Oil:
CHARACTERISTICS Tool Way Oil
32 68 100 220
Kinematic Viscosity @ 40°C., cSt 30 to 34 64 to 72 95 to 105 210 to 230
Viscosity Index 90 90 90 90
Flash Point,°C (COC), Min. 190 190 210 220
Pour Point, °C, Max. -3 -3 -3 -3
 

View Complete Details
Ask Latest Price & Details
Industrial Gear Oil

Industrial Gear Oil
  • GRADES VG 68, 100, 150, 220, 320, 460 & 680
Introduction of Industrial Gear Oil:Industrial Gear Oil are blended from highly refined Base Stocks and are fortified with specially selected EP and other Additives. They have good thermal stability and high oxidation resistance, good demulsibility, low foaming tendency and provide rust & corrosion protection to metal surfaces.
Application of Industrial Gear Oil:Industrial Gear Oil are recommended for heavy duty enclosed gear drives, with splash and circulation systems and for plain bearings, sliding surfaces & chain drives subjected to heavy shock loads where temperatures do not exceed 100C.
Performance Level of Industrial Gear Oil:Meets IS: 8406 - 1993 (RA 2006) requirements.

Typical Properties of Industrial Gear Oil:
CHARACTERISTICS Industrial Gear Oil
68 100 150 220 320 460 680

Kinematic Viscosity @

40°C., cSt

 66 - 70 95 - 105 145 - 155 210 - 230 310 - 330 450 - 470 640 - 700

Flash Point °C

(COC), Min.

 90 90 90 90 90 90 90

Pour Point

°C, Max.

 200 210 210 220 220 220 220

Viscosity

Index, Min.

 -6 -6 -6 -6 -6 -6 -6
View Complete Details
Ask Latest Price & Details
Refrigeration Oil

Refrigeration Oil
  • GRADES 12, 22, 32, 46, 68 & 100
Introduction of Refrigeration Oil:Refrigeration Oil possess very high fluidity at very low temperatures (low pour point) with low flock point, resist deposit formation; have good chemical stability with minimum tendency to foam. They also have good oxidation and thermal stability.
Application of Refrigeration Oil:Refrigeration Oil are recommended for lubrication of a wide range of refrigeration compressors of open, hermetically sealed and semi-sealed reciprocating and rotary type using conventional type refrigerants except SO2 at moderate thermal load.
Performance Level of Refrigeration Oil:Meet IS-4578 1997 requirements.

Meet IS-4578 – 1997 requirements. Typical Properties of Refrigeration Oil:
CHARACTERISTICS Hydraulic Oil Antiwear
12 22 32 46 68 100
Kinematic Viscosity @ 40°C., cSt 12 to 14 20 to 24 30 to 34 44 to 48 66 to 70 95 to 105
Flash Point °C (COC), Min. 140 140 150 160 170 200
Pour Point °C, Max. Minus 39 Minus 39 Minus 30 Minus 27 Minus 24  
Viscosity Index, Min. 55 55 55 55 55 60
View Complete Details
Ask Latest Price & Details
Agricultural Spray Oil

Agricultural Spray Oil
  • CHARACTERISTICS Agricultural Spray Oil
  • 100 Colour, ASTM, Max.
  • 1.0 Kinematic Viscosity at 40°C., cSt,
  • 13 to 17 Pour Point, °C. Max.
Agricultural Spray Oil
GRADES: AGRICULTURAL SPRAY OIL
Introduction of Agricultural Spray Oil:Agricultural Spray Oil is emulsifiable oil blended from high quality base oil and specially selected additives. The oil has an excellent wetting property and is compatible with most of the insecticides. Also the oil does not have any toxic influence on the surroundings.
Application of Agricultural Spray Oil:Agricultural Spray Oil is used in the form of oil-in-water (recommended dosage is 2 to 4 % of oil in water) and the emulsion is sprayed to control different type of insects. The oil is specially recommended for the protection of Agricultural trees from deadly sooty mould diseases by killing various organisms.
  • Orchard Spray Oil
  • Mango Spray Oil
  • Apple Spray Oil
  • Banana Spray Oil
  • Grape Spray Oil
Performance Level of Agricultural Spray Oil:Agricultural Spray Oil has unique property of easy emulsification and remains uniform over a wide range of temperature and period.

CHARACTERISTICS Agricultural Spray Oil
100
Colour, ASTM, Max. 1.0
Kinematic Viscosity at 40°C., cSt, 13 to 17
Pour Point, °C. Max. 0
Emulsion of  5 % of oil in 95 % of Demineralised water for 24 Hours. Stable Emulsion
View Complete Details
Ask Latest Price & Details
Multi Purpose Grease / Oil

Multi Purpose Grease / Oil
  • GRADES NLGI NO. 2 & 3
Introduction of Multi Purpose Grease / Oil :Multi Purpose Grease / Oil are premium quality lithium based multipurpose automotive grease manufactured from superior quality base stocks with specially selected additives and are having high drop points, good thermal stability, resistance to oxidation and structural stability. Multi Purpose greases provide protection against rust and corrosion.
Application of Multi Purpose Grease / Oil :Multi Purpose Grease / Oil are suitable for all types of automotive applications as excellent multi purpose greases.
  • Multi Purpose EP Grease 0, 1, 2 & 3
Performance Level of Multi Purpose Grease / Oil :Meet IS-12203 1999 requirements.

TYPICAL PROPERTIES Multi Purpose Grease / Oil
NO. 2 NO. 3
Type of Soap Lithium Lithium
Colour Brown Brown
Work Penetration at 25ºC 265 - 295 220 - 250
Drop Point °C, Min. 180 180
View Complete Details
Ask Latest Price & Details
Ep Grease

Ep Grease
  • GRADES NLGI 0, 1, 2 & 3
Introduction of EP Grease :EP Grease 0, 1, 2 & 3 are premium quality lithium based multipurpose extreme pressure greases manufactured from high quality base oil and fortified with specialy selected extreme pressure additives for higher load carrying ability. They have excellent structural stability, water resistance property, higher drop point, outstanding rust preventive ability and very good oxidation stability
Application of EP Grease :EP Grease 0, 1, 2 & 3 are recommended for all types of Industrial applications for plain, roller and anti friction bearings in wide variety equipments operating under severe shock loading conditions, such as earth moving equipment
Performance Level of EP Grease :EP Grease 0, 1, 2 & 3 meet IS 7623: 1993 EP Type [reaffirmed 2006]

Typical Properties of EP Grease :
TYPICAL PROPERTIES EP Grease
NLGI 0 NLGI 1 NLGI 2 NLGI 3
Type of Soap Lithium Lithium Lithium Lithium
Colour Dark Brown Dark Brown Dark Brown Dark Brown
Worked Penetration @ 25°C. 355 to 385 310 to 340 265 to 295 220 to 250
Drop Point °C, Min. 160 170 180 180
View Complete Details
Ask Latest Price & Details
High Vaccum Grease

High Vaccum Grease
  • CHARACTERISTICS High Vaccum Grease -III
  • Appearance Translucent
  • Unworked Penetration @ 25ºC 200 - 260
  • Softening Point, ºC 210
  • Evaporation loss @ 200 ºC after 24 hrs . 2% Max
Introduction of High Vaccum Grease :High Vaccum Grease - III is stiff non - melting grease. If maintains its consistency over a wide range of temperature, from -200C to 2000C. Its very low volatility, low vapour pressure of the base materials used, makes it an ideal sealant for high vaccum Grease / high pressure systems. High Vaccum Grease is not affected by water and chemically resistant also.
Applicationof High Vaccum Grease:High Vaccum Grease - III is used in lubricating plug valves, control systems wherein high vaccum / high pressures are encountered and valves remain operational for a longer period despite high temperature and adverse atmospheric conditions.
Performance Level of High Vaccum Grease:hitemp & hitemp extra grease meet IS 12790: 1990.

CHARACTERISTICS
High Vaccum Grease -III
Appearance Translucent
Unworked Penetration @ 25ºC 200 - 260
Softening Point, ºC 210
Evaporation loss @ 200 ºC after 24 hrs . 2% Max
View Complete Details
Ask Latest Price & Details
Neat Cutting Oil

Neat Cutting Oil
  • TYPICAL PROPERTIES Neat Cutting Oil 137
  • Kinematic Viscosity at 40°C., cSt 32 - 42
  • Flash Point, COC, °C 160
  • Copper Strip Corrosion, 3 Hrs / 100°C. 4
  • Sap Value, mg KOH/gm. 5
Introduction of Neat Cutting Oil 137 :Neat Cutting Oil 137 is staining type neat cutting oils manufactured from highly refined base stocks of medium viscosity and fatty oils for improved wetting characteristics to impart good heat dissipation characteristics, and also with active sulphur and chlorinated additive to impart EP properties. Its light colour provides good visibility of machining operations.
Application of Neat Cutting Oil 137 :Neat Cutting Oil 137 is recommended for heavy duty applications like gear hobbing, thread cutting, less severe machining operations on high tensile steel, stainless steel and some alloys.
Performance Level of Neat Cutting Oil 137 :Neat Cutting Oil 137 is a proprietary product.
View Complete Details
Ask Latest Price & Details
Quenching Oil

Quenching Oil
  • GRADES 22, SPECIAL 22, 32, SPECIAL 32 AND 68
Introduction of Quenching Oil :Quenching Oil are heat treatment oil blended from solvent refined base oil with specially selected additives that facilitate fast quenching through proper and controlled cooling, have outstanding chemical and oxidation stability. Quenching oil also have excellent thermal properties, low volatility, high flash, and fire points.
Application of Quenching Oil :
Quenching Oil are used for different types of quenching operations on wide variety metallic parts. Quenching Oil 22, Quenching Oil 32 and Quenching Oil 68 are straight mineral oil type quenching oil whereas Quenching Oils, Special 22 and Quenching Oil, Special 32 are compounded type quenching oil.
  • Quenching Oil HS 70
  • Marquench Oil 220, 460
  • Synquench Oil 330 & 440
Performance Level of Quenching Oil :Quenching oils meet IS: 2664 - 1980 (RA 2004).

Typical Properties of Quenching Oil :
TYPICAL PROPERTIES
Quenching Oil 22 Quenching Oil Special 22 Quenching Oil 32 Quenching Oil Special 32 Quenching Oil 68
Kinematic Viscosity at 40°C., cSt 22 to 24 22 to 24 32 to 34 32 to 34 66 to 70
Viscosity Index, Min. 90 90 90 90 90
Flash Point, °C, (COC), Min. 190 190 190 190 190
Pour Point, ºC, Max. -6 -3 -6 -3 -6
View Complete Details
Ask Latest Price & Details
Wool Combing Oil / Wool Batching Oil

Wool Combing Oil / Wool Batching Oil
Introduction of Wool Combing Oil / Wool Batching Oil :We are one of the leading manufacturer and suppliers of wool combing oil / wool batching oil that are used by various industries. Helping in reducing fibre to fibre and fibre to metal contact, its precise composition makes them perfect for being used in spinning applications as well as in the winding of wool.
Features of Wool Combing Oil / Wool Batching Oil :

Easy scouring

Freedom from gumming, rancidity and corrosion

Effective wool combing oil operations

Helps reduce friction in fibre and combing waste

Fibre-to-metal lubrication and inter fibre cohesion

It reduces the dropping and flying losses.

View Complete Details
Ask Latest Price & Details
Hydraulic Oil

Hydraulic Oil
Introduction of Hydraulic Oil.Hydraulic Oil also called hydraulic liquids, hydraulic fluids are the medium by which power is transferred in hydraulic machinery. Common hydraulic oil are based on mineral oil or water. Examples of equipment that might use hydraulic oil include excavators, brakes, power steering systems, transmissions, backhoes, garbage trucks, aircraft flight control systems and industrial machinery. There are other important functions of hydraulic oil such as protection of the hydraulic machine components.
Application of Hydraulic OilEnvironmentally sensitive applications may benefit from using biodegradable hydraulic oil / hydraulic fluids based upon rapeseed vegetable oil when there is the risk of an oil spill from a ruptured oil line.
View Complete Details
Ask Latest Price & Details
cylinder oil

Cylinder Oil
  • Special Cylinder Oil
Special Cylinder Oil are highly refined oil with high viscosity and low carbon residue and compounded with selected fatty oil for excellent oiliness and film strength properties together with rust and corrosion inhibitors. Special Cylinder Oil have excellent lubricity and wettability characteristics which enable the oil to be evenly distributed over the surface of the cylinder walls and pistons.
  • Steam Cylinder Oil
These are highly refined steam cylinder oil having excellent chemical and thermal stability and load carrying ability. Special Cylinder Oil reduce steam consumption due to good sealing characteristics and minimize frictional losses.
View Complete Details
Ask Latest Price & Details
Transformer Oil

Transformer Oil
  • CHARACTERISTICS Transformer Oil 335
  • Density at 29.5ºC 0.890
  • Flash Point, ºC (Pensky - Martin closed) 140
  • Pour Point ºC. Minus 6
  • Kinematic Viscosity at 27ºC, cSt 27
  • Breakdown Voltage, new unfiltered / after filtration 30 / 60
  • Corrosive Sulphur Non-corrosive
  • Oxidation Stability at 100ºC, 164 Hrs.         a) Total Acidity  b) Sludge a) 0.4  b) 0.1
  • Water Content, ppm 50
  • Dielectric Dissipation Factor (Tan d) at 90ºC -
  • Presence of Oxidation Inhibitor. Nil
Introduction of Transformer Oil :This Transformer Oil is having excellent insulating properties, good oxidation stability, low volatility and resistance to sludge formation. The oil is free from acid, alkali and corrosive sulphur and excellent demulsibility characteristic.
Application of Transformer Oil :Recommended for use in Transformers, Capacitors and Circuit Breakers.
Performance Level of Transformer Oil :Meets IS -335-1993 specification.
View Complete Details
Ask Latest Price & Details
White Soft Paraffin Oil

White Soft Paraffin Oil
  • CHARACTERISTICS Bees Wax
  • Sp. Gravity at 25°C 0.950 - 0.960
  • Melting Point 142 - 149° F
  • Color White, Yellow, Brown
  • Flash Point 468 - 482° F
  • Saponification Value 88 - 102
  • Acid Value 16 - 23
White Soft Paraffin - IP

Description of Bees Wax :
Bees Wax is used in the manufacture of Bees Wax Papers, Candles, Cosmetics, Modeling, Artificial Fruits and Flowers, in process of engraving, Shoe Polishes, Plasters and Ointments.

View Complete Details
Ask Latest Price & Details
open gear oil

Open Gear Oil
  • GRADES 100, 220, 450 & 1000
Introduction of Open Gear Oil:Open gear oil are bituminous lubricants containing EP and special tackiness additives. Open gear oil are having good load carrying capacity.
Application of Open Gear Oil:Open gear oil products are recommended for lubrication of open gears, wire ropes and chain drives. Also for lubrication of Kiln Tyres operating at high temperatures in Cement Mills and Chemical Plants.
View Complete Details
Ask Latest Price & Details
RO Type Hydraulic Oil

RO Type Hydraulic Oil
  • GRADES VG 12, 15, 22, 32, 37, 46, 57, 68, 81, 100, 121, 150, 176, 220, 320 and 460
Hydraulic Oil (RO Type)
Introduction of Hydraulic Oil (Ro Type):Hydraulic Oil are specially developed for circulating and hydraulic transmission system, and are manufactured from highly refined base stocks with high viscosity index. Hydraulic Oil are fortified with anti-oxidant, anti-corrosion, anti-wear, anti-rust and anti-foam additives.
Application of Hydraulic Oil (RO Type):Hydraulic Oil RO are suggested for moderate hydraulic systems and wide variety of circulating systems of industrial equipments.
Performance Level of Hydraulic Oil (RO Type):IS:3098:1983 [Reaffirmed February, 2004]
View Complete Details
Ask Latest Price & Details
Sugar Mill Oil

Sugar Mill Oil
  • GRADES 40, 80 & 120
Introduction of Sugar Mill Oil:Sugar mill oil is Bituminous Lubricant containing Non-Toxic EP additives and selected Compounding Agents for efficient Lubrication with excellent load carrying ability. Sugar mill oil prevents Wear and Corrosion of Bearings and also has Excellent Resistance to Leakage.
Application of Sugar Mill Oil:Sugar mill oil recommended for Lubrication of Heavily Loaded Mill Roll Bearings in Sugar mill oil and in Centralized Lubrication Systems of Slow Speed Spur and Helical Gears in certain Industries and also for Open Gear Lubrication Systems.

Typical Properties of Sugar Mill Oil:
CHARACTERISTICS Sugar Mill Oil
40 80 120
Kinematic Viscosity at 100°C, cSt 35 to 45 75 to 90 110 to 130
Flash Point, (COC) °C, Min. 230 230 230
Copper Strip Corrosion @ 100°C., 3 hrs. 1a 1a 1a
Timken OK Load, lbs 35 35 -6
 

View Complete Details
Ask Latest Price & Details
edm oil

Edm Oil
Description of EDM Oil :Electric Discharge Machining Oil is a metal removal process involving the removal of material from the work piece by a series of controlled electric discharges or sparks. The tool and the work piece are insulated by a special dielectric fluid. These fluid are formulated with a highly refined, narrow cut paraffinic base stock with excellent oxidation stability which helps reduce the formation of oxidation products that will alter the dielectric strength of the fluid. The product is colourless and virtually odourless. The product exhibits a relatively high flash point that helps to reduce the possibility of fire. The low viscosity of the fluid provides good circulation through the spark gap and more rapid removal and settling of metal fines.
Application of EDM Oil :Recommended for use in: Dielectric fluid in finish-cut electrical discharge (spark erosion) machining operations. Electrical discharge machining in tool and die shops, and in manufacture of electronics, extrusions, air-craft components, hardware, tools, fasteners, silver-ware, cutlery, jewellery, appliances, valves and regulators. Grinding fluid in glass grinding operations.

Typical Properties of EDM Oil :
CHARACTERISTICS EDM Oil
     
Grades 2 3 4
Colour Colourless Colourless Colourless
Kinematic Viscosity at 40°C, cSt 2.0 – 3.0 3.0 – 4.0 4.0 – 5.0
Flash Point, PMCC, °C, Min. 107 108 130
DI-electric Strength, KVA. 45 45 45
View Complete Details
Ask Latest Price & Details
base oil

Base Oil
Introduction of Base Oil :These are highly refined Base Oil Stocks available in Various Viscosity Range. Base Oil are having excellent Chemical & Thermal Stability & are having High Viscosity Index.
Application of Base Oil :


Bx-12:Base Oil is used for manufacture Soluble & Neat Cutting Oil, Textile Lubricants such as Coning Oil, Antistatic Oil, Spin Finish Oil, Shoe Polish, Pigments, Agricultural Spray Oil, Mould Oil, White & Paraffin Oils etc.

Bx-32:Recommended for use in Manufacture of Automotive & Industrial Lubricants, Rust Preventives, Flushing Oil, Heat Transfer Oil, White & Paraffin Oil, Metal Finishing Compound, Plasticizer, Rubber Products etc.

Bx-100:Recommended for us in Manufacture of Automotive & Industrial Oil & Greas, Pigments & Printing Ink etc.

Performance Level of High Vaccum Grease:hitemp & hitemp extra grease meet IS 12790: 1990.

Sr. No CHARACTERISTICS
Bx-12 Bx-32 Bx-100
1 Appearance Clear Clear Clear
2 Flash Point ºC, Min (COC) 160 180 210
3 Viscosity Index, Min. 90 95 90
4 Kinematic Viscosity @ 40ºC, cSt. 12 - 16 27 - 33 88 - 100
5 Pour Point ºC, Max. 0 0 0
6 ASTM Colour, Max. 2.5 2.5 3.0
7 Inorganic Acidity, Max. NIL NIL NIL
View Complete Details
Ask Latest Price & Details
white mineral oil

White Mineral Oil
Introduction of White Mineral Oil :White Mineral Oil is a purified mixture of Liquid Saturated Hydrocarbons, obtained from Petroleum & are highly paraffinic in nature. White mineral oil is Transparent, Colourless, Tasteless & Odourless when cold. White mineral oil highyl refined hydrotreated oil have excellent thermal & chemical stability having high flash points.
Application of White Mineral Oil :White Mineral Oil is used in the manufacture of Bulk Drugs, Cosmetics, Textile Auxiliaries, Plant Spray Oil, Agrochemicals, Aerosols, Dye Intermediates, Paper Industry, Inks, Perfumery, Specialty Lubricants, Plastics - used as Lubricant Plasticiser, Food Industry, Specialty Chemicals, Incenses, Personal Care Products etc.
View Complete Details
Ask Latest Price & Details
Textile Oil

Textile Oil
  • GRADES ISO VG 12, 22 & 32
Introduction of Textile Oil :Textile Oil are recommended for the lubrication of high speed spindles of Textile Mills and other Machine Tools as antistatic oil. These low viscosity spindle oil are manufactured from highly refined base stocks having excellent oxidation and rust stability and further fortified with oxidation and rust inhibitor, antistatic, antiwear and antifoam agents for better performance.
Application of Textile Oil :Textile Oil are used for high speed spindles of Textile Mills and other Machine Tools where there is a need for antistatic oil with scourable characteristics.

Typical Properties of Textile Oil :
CHARACTERISTICS Textile Oil
12 22 32
Kinematic Viscosity @ 40°C, cSt. 11.0 – 13.0 20.0 – 24.0 30.0 – 34.0
Viscosity Index, Min. 90 90 90
Flash Point, °C, COC, Min. 140 150 160
Copper Strip Corrosion Test at 100°C for 3 Hours, Max. 1 1 1
View Complete Details
Ask Latest Price & Details
Transmission Oil

Transmission Oil
Automatic Transmission Fluid A

Automatic Transmission Fluid / Oil A is a premium quality red coloured transmission fluid with low co-efficient of friction to meet Type A Suffix A specification of General Motor. Automatic transmission fluid / oil a is blended with highly refined base stock fortified with carefully selected additives to impart good resistance to thermal oxidation, very low temperature flow characteristics, and excellent seal compatibility with anti-wear and anti-corrosion properties. This high viscosity index oil ensures smooth powershift operation with minimum power loss.

View Complete Details
Ask Latest Price & Details
radiator coolant oil

Radiator Coolant Oil
  • Typical Properties Radiator Coolant Radiator Coolant
  • Kinematic Viscosity at 100°C., cSt, Bluish Green
  • Flash Point,°C (COC), Min. 155
  • TBN, mg KOH / gm. (-) 35
  • Pour Point, °C Max. (-) 15  
Introduction of Radiator Coolant:Radiator Coolant is a premium quality synthetic radiator coolant which is free from amines, borates, silicates and phosphates. Radiator Coolant is easily miscible with water and possesses excellent hard water stability. Radiator Coolant has good chemical stability and protects non-metallic components of engine radiator coolant, like gaskets and hoses. It exhibits high boiling point and low freezing point to take care of summer and winter.
Application of Radiator Coolant:Radiator Coolant is recommended for use in mobile and stationary automotive engines having closed loop radiator coolant circulation systems and advised to use one part of the concentrated fluid with two parts of water (preferably Demineralised Water) in the engine radiator coolant or as per the recommendation of OEM.
Performance Level of Radiator Coolant:It meets the requirement of. JIS K - 2234 - 1934.. IS: 5759 - 1994.
View Complete Details
Ask Latest Price & Details
Pump Set Oil

Pump Set Oil
  • Type Pure
  • Application Pump Set
  • Color Black
  • Purity 100%
  • Form Liquid
  • Stroke Type 2stroke, 4stroke
  • Grade Superior
  • Storage Cool & Dry Place
Pumpset Oil 40, 50 are blended from highly refined base stocks with high viscosity index and additives that impart detergent, dispersant, antioxidant and anti-wear properties. Besides lowering the maintenance cost, Pumpset Oil 40, 50 enhance the engine life with less wear and tear.

Typical Properties of Pumpset Oil:
CHARACTERISTICS Pumpset Oil 40 Pumpset Oil 50  
Kinematic Viscosity at 100°C., cSt, 14.0 19.0  
Flash Point,°C (COC), Min. 220 220  
TBN, mg KOH / gm. 5.0 5.0  
Pour Point, °C Max. (-) 6 (-) 6  
 

View Complete Details
Ask Latest Price & Details
calibration oil

Calibration Oil
Introduction of Calibration Oil :Calibrating Oil 2, 5 are simulated fuels with properties similar to diesel fuel. These specially developed fluids are not only safer to use, but are formulated to meet tighter, more demanding specifications required in the manufacturing processes used by the fuel system component manufacturers when building fuel pumps, fuel injectors and fuel, air and oil filters. These fluids contain a range of special additives to enhance corrosion resistance, oxidation stability and anti-wear. Calibrating oil are more suitable than commercially refined fuels for use in manufacturing processes due to the precisely controlled viscosity, density, higher & safer flash points and lower aromatic hydrocarbon content.
Application of Calibration Oil:calibrating oil 2, 5 are recommended for the calibration of fuel pumps, fuel injectors and fuel, air and oil filters.

Performance Level of Calibration Oil:

Meets the performance level of ISO: 4113

TYPICAL PROPERTIES Calibration Fluid 2 Calibration Fluid 5
Kinematic Viscosity at 40°C., cSt, 2.45 - 2. 75 5. 0 - 6. 0
Flash Point, °C. (PMCC), 75 Min. 130 Min.
Pour Point, °C. Max. (-) 6 Max. (-) 6 Max.
View Complete Details
Ask Latest Price & Details
Turbine Oil

Turbine Oil
  • GRADES 32, 46, 57, 68 & 76
Introduction of Turbine Oil :Turbine Oil are blended from highly refined turbine base stocks containing antioxidant, rust inhibitor and antifoam additives. They have excellent thermal stability and demulsibility.
Application of Turbine Oil:Turbine Oil recommended for lubrication of steam, gas and hydraulic turbines.
Performance Level of Turbine Oil:1983 specifications, BIS 1012 - 1987 (Reaffirmed 1993), Meet General Electric GEK 27070 Specification, KWU (Siemens) W. Germany.

Typical Properties of Turbine Oil:
CHARACTERISTICS Turbine Oil
32 46 57 68 76
Kinematic Viscosity @ 40°C, cSt. 30 to 34 44 to 48 44 to 48 66 to 70 74 to 78
Viscosity Index, Min. 100 100 98 98 98
Flash Point, °C, COC, Min. 200 210 210 210 210
Pour Point, °C, Max. -9 -9 -9 -9 -9
View Complete Details
Ask Latest Price & Details
HLP Type Hydraulic Oil

HLP Type Hydraulic Oil
  • GRADES VG 32, 46, 57*, 68, 100 AND 150
Introduction of Hydraulic Oil (HLP Type)::Hydraulic Oil HLP are premium grade hydraulic oil having extra heavy duty anti-wear property with excellent thermal stability and high FZG rating. They have excellent compatibility with seals normally used in hydraulic system and unique hydrolytic stability.
Application of Hydraulic Oil (HLP Type):Hydraulic Oil HLP are recommended for high performance electro-hydraulic or numerically systems. Hydraulic Oil HLP are also used as screw compressor oils.
Performance Level of Hydraulic Oil (HLP Type):IS:10522:1983 [Reaffirmed November, 1998] DIN 51524 Part II

Typical Properties of Hydraulic Oil (HLP Type) :
CHARACTERISTICS Hydraulic Oil HLP
32 46 68 100 150
KV at 40°C 30 - 34 44 – 48 66 - 70 95 - 105 145- 155
VI, Min. 95 95 95 95 95
Flash Point, COC, °C. Min 190 210 210 210 210
Pour Point, °C. Max. -6 -6 -6 -6 -6
View Complete Details
Ask Latest Price & Details
HVI Hydraulic Oil

HVI Hydraulic Oil
  • GRADES VG 32, 46, 68, 100
Introduction of Hydraulic Oil HVI:Hydraulic Oil HVI are premium grade high viscosity index hydraulic oils which have excellent shear stability and can withstand wide range of temperatures. Hydraulic Oil contain special additive package that reduces wear, rust, oxidation, etc, and imparts good hydrolytic stability and water separation characteristics. Good anti-foam and air release properties ensure smooth operation and system efficiency. They have excellent compatibility with seals normally used in hydraulic system.s
Application of Hydraulic Oil HVI:Hydraulic Oil HVI are mainly recommended for hydraulic excavators of Tata-Hitachi, L & T, Komatsu, etc. and can also be used for suitable industrial applications.
Performance Level of Hydraulic Oil HVI:DIN 51524 Part 3

Typical Properties of Hydraulic Oil HVI
CHARACTERISTICS Hydraulic Oil Antiwear
32 46 68 100
KV at 40°C 30 - 34 44 to 48 66 - 70 95 - 105
VI, Min. 150 95 135 130
Flash Point, COC, °C. Min 160 160 160 190
Pour Point, °C. Max. -39 -39 -33 -27
View Complete Details
Ask Latest Price & Details
Machinery Oil

Machinery Oil
  • GRADES VG 22, 32, 46, 68, 100, 150, 220, 320 & 460
Introduction of Machinery Oil:Machinery Oil have good inherent oxidation and thermal stability, noncorrosive, excellent ability to separate from water and high viscosity index with light colour.
Application of Machinery Oil:Machinery Oil are generally suggested for non-critical all loss lubrication systems and other oiling applications by hand for lubrication of bearings, open gears, light loaded slides and guide ways of machine tools. They are widely used in textile mills for lubrication of looms and other equipments which do not require additive containing oils. Machinery oil are also recommended for flushing of inaccessible internal surfaces of various automotive and industrial equipments.
Performance Level of Machinery Oil:IS:493 (Part 1):1981 [Reaffirmed November, 1998]

Typical Properties of Machinery Oil:
CHARACTERISTICS Machinery Oil
22 32 46 68 100 220 320 460 460
KV at 40°C 20 - 24 30 - 34 43 - 49 64 - 72 95 - 105 145- 155 210- 230 300- 340 440-480
VI, Min. 90 90 90 90 90 90 90 90 90
Flash Point, COC, °C. Min 160 160 160 160 170 190 200 200 240
Pour Point, °C. Max. -6 -6 -6 -6 -6 -6 -6 -6 -6
View Complete Details
Ask Latest Price & Details
pneumatic tool oil

Pneumatic Tool Oil
  • GRADES 46, 100, 181 & 220
Introduction of Pneumatic Tool Oil:Pneumatic Tool Oil are specially developed products blended from highly refined base stocks and selected additives that provide excellent rust preventive and extreme pressure properties with good adhesiveness. Pneumatic Tool oil have good protection against wear and metal wetting properties that maintain continuous oil film resulting in long equipment life.
Application of Pneumatic Tool Oil:Pneumatic Tool Oil are recommended for use in all pneumatically operated rock drills in both underground and surface mining, wagon drills, chippers and jack hammers in building and highway constructions as well as other industrial applications.
View Complete Details
Ask Latest Price & Details
Heat Transfer Fluid

Heat Transfer Fluid
Heatra FluidHeatra Fluid are specially selected mineral oil with good oxidation and thermal stability for use in Industrial Heat Transfer applications. These Oil possess low volatility and low vapour pressure to give a long and trouble free service life in heat transfer systems.
Heatra Fluid Special OilHeatra Fluid Special Oil are manufactured from specially selected antioxidants and light coloured high VI base stocks with good oxidation and thermal stability for use in Industrial Heat Transfer applications for extra long service life. These Oils possess low volatility, low vapour, low sulphur content and low CCR value for superior performances.
DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.
View Complete Details
Ask Latest Price & Details
Silicone Grease

Silicone Grease

Introduction of Silicone Grease :
Silicone Grease is a waterproof grease made by combining a silicone oil with a thickener. Silicone grease is commonly used for lubricating and preserving rubber parts, such as O-rings. Additionally, silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon based greases.Special versions of silicone grease is also used widely by the plumbing industry in faucets and seals, as well as dental equipment.

View Complete Details
Ask Latest Price & Details
Wheel Bearing Grease

Wheel Bearing Grease
  • CHARACTERISTICS Wheel Bearing Grease 100
  • Type of Soap Sodium
  • Colour Brownish Black
  • Work Penetration at 25ºC 250 - 280
  • Drop Point °C, Min. 170
Introduction of Wheel Bearing Grease :Wheel Bearing Grease is sodium based automotive grease manufactured from superior quality base stocks and specially selected additives. Wheel Bearing Grease is having high drop point, good thermal and structural stability. Wheel Bearing Grease provides long service life of anti-friction bearings of light and heavy vehicles under most extreme condition of operation.
Application of Wheel Bearing Grease :Wheel Bearing Grease is recommended for the lubrication and protection of wheel bearing and other components of vehicles which do not come in contact with moisture / water.
Performance Level of Wheel Bearing Grease :Meet IS: 10647 - 1983 ( RA 1993).

CHARACTERISTICS
Wheel Bearing Grease 100
Type of Soap Sodium
Colour Brownish Black
Work Penetration at 25ºC 250 - 280
Drop Point °C, Min. 170
View Complete Details
Ask Latest Price & Details
high temperature grease

High Temperature Grease
Introduction of High Temperature Grease :These are non-soap base smooth structured grease for high temperature grease operating conditions under severe shock load conditions. High temperature grease are water resistant and are not affected by acids / alkalis. They have high mechanical stability for long life and protection against rust. High Temperature Grease Extra contains molybdenum disulphide for extra load.
Application of High Temperature Grease :High Temperature Grease is recommended for plain bearings, anti friction bearings operating at high temperature (120C to 250C). High Temperature Grease is recommended for highly loaded machinery operating at above high temperatures.
Performance Level of High Temperature Grease :High Temperature Grease & High Temperature Extra Grease meet IS 12790: 1990.

Typical Properties of High Temperature Grease :
CHARACTERISTICS High Temperature Grease
HITEMP HITEMP EXTRA
Colour Brown Greenish Black
Worked Penetration at 25°C. 265 to 295 265 to 295
Drop Point °C, Min. Above 280 Above 280
Copper Corrosion Test at 100ºC for 3 hours. Passes Passes
View Complete Details
Ask Latest Price & Details
Chassis Grease

Chassis Grease
  • GRADES NLGI NO. 1
  • CHARACTERISTICS Chassis Grease
  • Type of Soap Calcium
  • Colour Yellowish Brown
  • Work Penetration at 25ºC 310 - 340
  • Drop Point °C, Min. 95
Introduction of Chassis Grease :Chassis Grease is premium quality calcium based automotive grease manufactured from superior quality base stocks and specially selected additives. Chassis Grease is having moderately high drop points, resistance to oxidation, good thermal and structural stability. Chassis grease also provides protection against rust and corrosion.
Application of Chassis Grease :Chassis Grease an ideal product for lubrication of chassis of all types of automotive vehicles, passenger and commercial, tractors and other heavy duty equipment.
Performance Level of Chassis Grease:Meet IS: 506 - 1993

CHARACTERISTICS
Chassis Grease
Type of Soap Calcium
Colour Yellowish Brown
Work Penetration at 25ºC 310 - 340
Drop Point °C, Min. 95
View Complete Details
Ask Latest Price & Details
Cup Grease

Cup Grease
  • GRADES NLGI NO. 2 & 3
Introduction of Cup Grease :Cup Grease are premium quality calcium based grease manufactured from superior quality base stocks with specially selected additives. Cup Grease are having high drop points, good thermal stability, resistance to oxidation and structural stability. Cup Grease provide protection against rust and corrosion also.
Application of Cup Grease :Cup Grease are suitable for all types of general applications of automotive and industrial purposes.
Performance Level of Cup Grease :Meet IS-507 - 1993 requirements.

Typical Properties of Cup Grease :
TYPICAL PROPERTIES Turbine Oil
NO. 2 NO. 3
Type of Soap Calcium Calcium
Colour Yellowish Brown Yellowish Brown
Work Penetration at 25ºC . 265 - 295 220 - 250
Drop Point °C, Min 90 90
View Complete Details
Ask Latest Price & Details
Soluble Cutting Oil

Soluble Cutting Oil
Introduction of Soluble Cutting OilSoluble Cutting Fluid / Oil is a type of coolant and lubricant designed specifically for metalworking and machining processes. There are various kinds of cutting fluid, which include oils, oil-water emulsions, pastes, gels, and mists. They may be made from petroleum distillates, animal fats, plant oils, or other raw ingredients. Depending on context and on which type of cutting fluid is being considered, it may be referred to as Soluble Cutting Fluid, Soluble Cutting Oil, Soluble Cutting compound, Soluble Cutting Fluid Coolant, or Soluble Cutting Fluid Lubricant.
  • SYN GR Fluid 2, 5, 12
Syn Gr Fuid 2, 5 & 12 are water soluble synthetic grinding fluid of solution type. They are supplied in a concentrated form and are to be diluted with water in a suitable ratio. They are free from any mineral oil or fatty matter. These products are economical with good cooling and remarkable antirust properties when applied in grinding and other high speed machining operations.
View Complete Details
Ask Latest Price & Details
aluminium rolling oil

Aluminium Rolling Oil
Introduction of Aluminium Rolling Oil:Aluminium Rolling Oil are premium quality, low viscosity straight mineral oil specially developed for cold rolling oil operation of aluminium sheets, strip or foils. Their narrow boiling ranges and high IBP reduce the rate of evaporation which brings down the consumption of oil (Roll Coolant) considerably. The inherent oiliness property reduces the friction to a greater extent and helps the metal reduction without any slippage. Aluminium Rolling Oil is non-staining, noncorrosive and has good additive solubility for fats and alcohols which are added by the manufacturers of aluminium rolling oil for the advantage of smooth productions.
Application of Aluminium Rolling Oil :Aluminium Rolling Oil are recommended for cold rolling of aluminium sheets, strip or foils.
View Complete Details
Ask Latest Price & Details
Coning Oil

Coning Oil
  • CHARACTERISTICS Coning Oil 10
  • Kinematic Viscosity @ 40°C, cSt. 9 to 14
  • Colour, ASTM, Max. 1.0
  • Flash Point, COC, ºC 150
  • Emulsion Stability Test for 24 Hrs. Passes
Introduction of Coning Oil :Coning Oil 10 is emulsifiable type oil and has been formulated from highly refined mineral oil and specially selected premium surface active agents to provide appropriate antistatic property. Coning oil is non-staining, with good emulsion stability and excellent antistatic property with scourable quality.
Application of Coning Oil :Coning Oil 10 is used for all texturising / twisting / crimping operations for synthetic yarns. Coning Oil is also used for softening and wetting the yarns during woolen / rayon cording and rayon coning operation.
Performance Level of Coning Oil :Coning Oil 10 is a proprietary grade.

CHARACTERISTICS Coning Oil 10
Kinematic Viscosity @ 40°C, cSt. 9 to 14
Colour, ASTM, Max. 1.0
Flash Point, COC, ºC 150
Emulsion Stability Test for 24 Hrs. Passes
View Complete Details
Ask Latest Price & Details
Marine Turbine Oil

Marine Turbine Oil

This heavy gear oil can create viscous drag leading to inefficiencies in vehicle operation. Some modern automatic transaxles (integrated transmission and differential) do not use a heavy gear oil at all but lubricate with the lower viscosity hydraulic fluid, which is available at pressure within the automatic transmission. Most lubricants for manual gear boxes and differentials are hypoid gear oil. These contain extreme pressure (EP) additives and antiwear additives to c

View Complete Details
Ask Latest Price & Details
Heavy Liquid Paraffin Oil

Heavy Liquid Paraffin Oil
Introduction of Heavy Liquid Paraffin Oil :Heavy Liquid Paraffin Oil is the common name for the alkane hydrocarbons with the general formula CnH2n+2. The simplest heavy liquid paraffin oil molecule is that of methane, CH4, a gas at room temperature. Heavy liquid paraffin wax (or simply "paraffin oil", but see alternative name for kerosene, above) is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 47 C and 64 C, and having a density of around 0.9 g/cm3.
Application of Heavy Liquid Paraffin :In industrial applications, it is often useful to modify the crystal properties of the Heavy Liquid Paraffin wax, typically by adding branching to the existing carbon backbone chain. The modification is usually done with additives, such as EVA copolymers, microcrystalline wax, or forms of polyethylene. The branched properties result in a modified Heavy Liquid Paraffin with a higher viscosity, smaller crystalline structure, and modified functional properties.
View Complete Details
Ask Latest Price & Details
White Soft Paraffin IP Oil

White Soft Paraffin IP Oil
  • CHARACTERISTICS White Soft Paraffin I.P.
  • ACIDITY / ALKANITY Passes
  • CONSISTENCY @ 25ºC, 1/10 mm Between 100 to 300
  • LIGHT ABSORPTION at 290 mm Less than 0.75
  • MELTING POINT ºC Between 38º to 56ºC
White Soft Paraffin - IP :
Introduction of White Soft Paraffin - IP :White Soft Paraffin - IP is a homogenous mixtures of oily & waxy long chain, non-polar hydrocarbons, odourless & tasteless, colour is white. White Soft Paraffin - IP is available in different consistencies & shear strength.
Application of White Soft Paraffin - IP :Personal care & pharmaceutical formulations often requires White Soft Paraffin as a formulation base
Uses :White Soft Paraffin - IP is a pharmaceutical aid-ointment base. It passes I.P. (Indian Pharmacopoeia) 1996. It also passes B.P. (British Pharmacopoeia) 1998 & also U.S.P. Specifications.
View Complete Details
Ask Latest Price & Details
Yellow Soft Paraffin - IP Oil

Yellow Soft Paraffin - IP Oil
  • CHARACTERISTICS White Soft Paraffin I.P.
  • Acidity / Alkanity Passes
  • Consistency @ 25ºc, 1/10 Mm Between 100 to 300
  • Light Absorption At 290 Mm Less than 0.75
  • Melting Point ºc Between 38º to 56ºC
  • Colouring Matter Test Passes
Introduction of Yellow Soft Paraffin - IP :Yellow Soft Paraffin - IP is a purified, semi-solid mixture of hydrocarbons obtained from petroleum.
Category of Yellow Soft Paraffin - IP :Yellow Soft Paraffin - IP is pharmaceutical & ointment base.
Description of Yellow Soft Paraffin - IP :Pale Yellow or Yellow, Transfluent Soft man, retaining this characteristics on storage
View Complete Details
Ask Latest Price & Details
HLP ZF Hydraulic Oil

HLP ZF Hydraulic Oil
  • GRADES VG 32, 46, 68, AND 100
Introduction of Hydraulic Oil (HLP ZF):Hydraulic Oil HLP ZF comprise a range of high performance hydraulic oil blended from solvent refined high viscosity index paraffinic mineral oil and zinc free ashless additives. Good thermal and oxidative stability provide reliable and extended oil life in severe applications with minimal deposit formation that gives cleaner system and reduced frequency of filter changes. Also these oils also have excellent water separation characteristics, hydrolytic stability and compatibly to seals normally used in hydraulic systems.
Application of Hydraulic Oil (HLP ZF):Hydraulic Oil HLP ZF are recommended for hydraulic systems requiring excellent anti-wear and superior oxidation performance with ultra fine filtration and compatibly with elastomer materials.
Performance Level of Hydraulic Oil (HLP ZF):

IS: 10522:1983 [Reaffirmed November, 1998]

IS: 11656:1986 [Reaffirmed March, 2002]

DIN 51524 Part II

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Eastern Petroleum Private Limited (Eastern Petroleum Private Limited)
  • Address : 213, Swastik Chambers,C.S.T. Road, Chembur. – 400 071., Mumbai, Maharashtra, India
  • Share us via
    Linkedin pinterest
View Contact No.