Our Products
TYPICAL PROPERTIES | Rubber Extender Oil | ||||
Kinematic Viscosity at 400°C., cSt | Rubber Extender Oil Light | Rubber Extender Oil Medium | Rubber Extender Oil Heavy | Rubber Extender Oil Extra Heavy | |
Kinematic Viscosity at 400°C., cSt | 18 - 21 | 21 - 26 | 26 - 30 | 30 - 40 | |
Flash Point, COC, °C. Min. | 220 | 220 | 220 | 220 | |
Aniline Point, °C. | 52 | 50 | 48 | 45 | |
Pour Point °C., Max. | +30 | +30 | +30 | +30 |
CHARACTERISTICS | Glass Mould Oil | ||||
VG 10 | VG 15 | VG 22 | |||
Kinematic Viscosity @ 40°C, cSt. | 9.0 to 11.0 | 14.0 to 16.0 | 20.0 to 24.0 | ||
Colour, ASTM, Max. | 2.0 | 3.0 | 4.0 | ||
Flash Point, ºC, Min. | 110 | 130 | 150 | ||
Pour Point, °C, Max. | 3 | 3 | 3 |
CHARACTERISTICS | Loom Oil N | ||||||||
22 | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | |
KV at 40°C | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 | 20 – 24 |
VI, Min. | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
Flash Point, COC, °C. Min | 160 | 160 | 160 | 160 | 170 | 190 | 200 | 220 | 240 |
Pour Point, °C. Max. | -6 | -6 | -6 | -6 | -6 | -6 | -6 | -3 | -3 |
An Emulsifiers is a substance which stabilizes an emulsion by increasing its kinetic stability. One class of emulsifiers is known as surface active substances, or surfactants. Examples of food emulsifiers are egg yolk, honey, and mustard, where a variety of chemicals in the mucilage surrounding the seed hull act as emulsifiers; proteins and low-molecular weight emulsifiers are common as well. Soy lecithin is another emulsifiers and thickener. In some cases, particles can stabilize emulsions as well through a mechanism called Pickering stabilization. Both mayonnaise and Hollandaise sauce are oil-in-water emulsions that are stabilized with egg yolk lecithin or other types of food additives such as Sodium stearoyl lactylate.
This type of Fuel Additives is a detergent additive that acts as a cleansing agent in small passages in the carburetor or fuel injectors. This in turn serves to ensure a consistent air and fuel mixture that will contribute to better gas mileage. Fuel Additives in general Ether and other flammable hydrocarbons have been used extensively as starting fluid for many difficult-to-start engines, especially diesel engines.
Typical Properties of Mist Oil:
CHARACTERISTICS | Mist Oil | |||||
32 | 46 | 68 | 100 | |||
KV at 40°C | 30 - 34 | 44 - 48 | 64 - 72 | 95-105 | ||
VI, Min. | 95 | 95 | 95 | 95 | ||
Flash Point, COC, °C. Min | 200 | 200 | 210 | 210 | ||
Pour Point, °C. Max. | -12 | -12 | -12 | -12 |
Typical Properties of Morgan Bearing Oil:
CHARACTERISTICS | Hydraulic Oil Antiwear | |||||
100 | 150 | 220 | 320 | 460 | ||
Kinematic Viscosity @ 40°C, cSt. | 95 to 105 | 145 to 155 | 210 to 230 | 310 to 330 | 440 to 480 | |
Viscosity Index, Min. | 95 | 95 | 95 | 95 | 95 | |
Flash Point °C (COC), Min. | 210 | 210 | 220 | 220 | 250 | |
Pour Point, °C. Max. | -6 | -6 | -6 | -6 | -6 |
CHARACTERISTICS | Steel Ep Oil | |||||
100 | 150 | 220 | 320 | 460 | ||
Kinematic Viscosity @ 40°C., cSt | 95 - 105 | 145 - 155 | 210 - 230 | 310 - 330 | 440 - 480 | |
Flash Point °C (COC), Min. | 95 | 95 | 90 | 90 | 90 | |
Pour Point °C, Max. | 210 | 210 | 220 | 220 | 260 | |
Viscosity Index, Min. | -6 | -6 | -6 | -6 | -6 |
CHARACTERISTICS | Conmol Oil | ||||
5 | 22 | ||||
Kinematic Viscosity @ 40°C, cSt. | 4.5 to 5.5 | 20.0 to 24.0 | |||
Colour, ASTM, Max. | 3.0 | 3.0 | |||
Flash Point, °C, COC, Min. | 120 | 160 | |||
Pour Point, °C, Max. | -3 | -3 |
CHARACTERISTICS | Concrete Mould Oil | ||||
5 | 22 | ||||
Kinematic Viscosity @ 40°C, cSt. | 4.5 to 5.5 | 20.0 to 24.0 | |||
Colour, ASTM, Max. | 3.0 | 3.0 | |||
Flash Point, °C, COC, Min. | 120 | 160 | |||
Pour Point, °C, Max. | -3 | -3 |
Application of Marquench Oil :
Marquench Oil are suitable for usage at bath temperatures of 150C to 220C and are recommended for all marquenching operations which require high quenching speed e.g., mass production of high precision products such as automotive gears, bearings, tools, dies etc. with low distortion due to quenching.
Introduction of Drawing Compound / Drawing Lubricants :
Drawing lubricants is an invert emulsion that thickens while water is added. The viscosity changes from thin to thick which makes it an ideal drawing lubricants. Drawing lubricants product was approved by General Motors in 1979. Metal Mates 123 Drawing Lubricants is easily cleaned and is weldable. This emulsifiable product was approved by GM and lent itself to cleaner parts, dies and improved housekeeping. Drawing Lubricants product contains no chlorine, pigments, or waxes.
CHARACTERISTICS | Knitting Oil | ||||
12 | 22 | 32 | |||
Colour, ASTM | 1.0 | 1.0 | 1.0 | ||
Kinematic Viscosity @ 40° C, cSt. | 11.0 - 13.0 | 21.0 - 23.0 | 31.0 – 33.0 | ||
Flash Point, COC,°C, Min. | 140 | 160 | 170 | ||
Copper Strip Corrosion Test @ 100°C. For 3 Hrs. . | 1 | 1 | 1 |
In contrast to paraffinic oil, naphthenic oil are distinguished by a molecular structure composed of "rings" of hydrocarbons, i.e., the hydrogen and carbon atoms are linked in a circular pattern. Naphthenic oil do not contain wax and behave differently than paraffinic oils. Naphthenic Oil have very good solvency with low pour points. They also have good color stability. Naphthenic oil have lower flash points than corresponding paraffinic oil Naphthenic Oil have:
CHARACTERISTICS | Naphthenic Oil | ||
Naphthenic Oil 12 | Naphthenic Oil 22 | Naphthenic Oil 100 | |
Kinematic Viscosity @ 40°C, cSt. | 12 | 22 | 100 |
Flash Point °C (COC), Min. | 140 | 160 | 200 |
Pour Point, ºC, Max. | -42 | -39 | -33 |
Aniline Point, ºC. | 68 | 73 | 88 |