Post Buy Requirement
EE
Greater Noida, Uttar Pradesh, India
Add Review

Our Products

  1. Autoclaves 3 Products available
  2. Laboratory Furniture 5 Products available
  3. Storage Drums, Tanks & Containers 3 Products available
  4. Cupboard 5 Products available
  5. Industrial Furniture 6 Products available
  6. Measuring Instruments & Equipment 7 Products available
  7. Tables 3 Products available
  8. Anatomical Models 4 Products available
  9. Microscope 7 Products available
  10. Industrial Chemicals 3 Products available
  11. Others 118 Products available

Other Products / Services

Skeleton With Removable Parts

As an ace supplier, manufacturer and trader of Skeleton with Removable Parts, we have marked our name very strongly in the market. These are made available at industry leading rates. These are designed in order to be used in a number of different laboratories and institutions for teaching purpose and also in the medical industry. It correctly display the human body structure and all the associated bones related to the joint. We always ensure the on-time delivery for all of our products in a less turnaround time.
View Complete Details

All Geared Radial Drill

All Geared Radial Drill.


Standard Accessories Box Table, Electric Motors AC/400/440 Volts, Panel Board forCentralised electrical Controls and Limit Switches.


MachineLamp, Coolant Pump Complete with fittings, Set of Foundation Bolt, Instruction Manual, Spare part List & Tool Box Special Accessories : Machine Vice, Boring Attachment, Tapping Attachment, Drill Chuck, Socket & Sleeves & Tilting Table

View Complete Details

13 MM Bench Type Pillar Drill

13 MM Bench Type Pillar Drill

13 MM Bench Type Pillar Drill. 

Drilling Capacity in M. S. 13 19 19
Tapping Capacity in M. S. --- --- 14
       
SPINDLE      
Spindle Travel 80 130 130
Spindle Taper MT-1 MT-2 MT-2
No. of Spindle Speeds 500 - 2825 86 - 3360 86 - 3320
No. of Feeds --- --- Fine feed /Without
       
WORKING RANGE      
Column Diameter 46.10 73.80 87
Max. Dis. Centre to Column 152 200 378
Max. Dist. Spindle Nose to Table 356 710 585
Max. Dist. Spindle Nose to Base Plate 510 925 980
Working Surface of Table 215 x 222 267 x 270 395 x 395
Working Surface of Base Plate 235 x 370 495 x 310 645 x 375
Electric Motor 0.5 HP 1440 RPM 0.75HP 1440 RPM 1 HP 1440 RPM
Overall Dimensions 725 x 375 x 325 1275 x 675 x 425 1275 x 725 x 395
Net Weight 44 Kgs. 101 Kgs. 205 Kgs.
Wooden Case Dimensions 775 x 410 x 355 1350 x 710 x 465 1275 x 725 x 395
 

View Complete Details

Conduit Pipe Bender

Conduit Pipe Bending Machine for 14 to 24 Gauge Aluminium Copper & Steel Pipes complete with formers of 5/8", 3/4" & 1" or any three formers up to 1". (We can arrange to supply formers in sizes of your requirement up to 1.1/4")

View Complete Details

Automatic Power Operated Pipe Bending Machine

automatic Power Operated Pipe Bending Machine.


A Simple robust and semi AUTOMATIC POWER OPERATED PIPE BENDING MACHINE Suitable for fabrication work required in various industries. Also pipe in manufacturing pipe furniture & Scooter, Motorcycles and Moped Accessories. The machine is driven by 2 H.P. Motor through a Redicon reduction gearbox & can bend pipe to various angle Bending capacity up to 1.1/4" Diametar & Swg. The machineiseasy to set and operate. The operation is fully automatic and is precisely controlled by electrical relays. As soon as operation is over the machine comes back to the original position for reloading and hence is safe to operate.


 

Working Round Plate 610 mm X 22mm 762mm X 22 mm
Motor David Brown Reduction Gear Box 3 H.P. 3 Ph. 940 R. P. M.
Reduction Gear Box No. A-287 No. A-337
Bending Arm Speed 4 R.P.M. 4 R.P.M.
Bending Capacity Up to 25.4 mm and 8 Swg Up to 38 mm and 8 Swg
Working height 915 mm 91 5 mm
View Complete Details

Scrap Bailing Press

Scrap Bailing Press.

RIPPLE COMPRESSION    
Baling Chamber 20" x 22" x 45" (WxHxL) 12" x 16" x 45" (WxHxL)
Bale Size 10" x 10" x 8-10"(WxHxL) 12" x 16" x 4-6" (WxHxL)
Electric Motor 25 HP 3 PHASE 1440 RPM 15 HP 3 PHASE 1440 RPM
Oil Drive PLUNGER PUMP PLUNGER PUMP
Force on Lid 40 Tons Manual
Force on Main Cylinder 75 Tons 75 Tons
Force on Side Cylinder 75 Tons NO
Force Ejector Cylinder 12 Tons NO
Working Pressure 3300 PSI 3300 PSI
Weight of the Bale 40-60Kgs (in MS)    20-35Kgs (Approx) (in MS)
Idle Cycle Time 90-95 Second (Approx) 90-95 Second (Approx)
Weight of the Machine 5 Tons (Approx) 2.75 Tons (Approx)
Oil Tank Capacity 300Lts HYDRO / ENCLO-68 200Lts HYDRO / ENCLO-68

 

   
View Complete Details

Mechanical Clutch Bending Press Brakes

Mechanical Clutch Bending Press Brakes Special Features nbsp; Connection link mounted on crank shaft for uniform load.


separate Drive system for each connection link, Sufficient H.P Normal torque motors provided. Boltless pedal mounted on hexagonal bar. General purpose V-Block and punch supplied as standard accessories.

Tonnag Clear Distance Between Housings G Bending cap. in M.S Leng. x Thick. Main motor HP/KW
20 990 1525x1.6 3/2.2
25 1220 2030x1.6 5/3.7
65 1220 2030 x 4 7.5/5.6
80 1700 2540 x 4 10/7.7
100 1700 3125 x 4 15/11.2
100 1700 2540 x 5 15/11.2
125 1700 3125 x 5 20/15
120 1700 2540 x 6 20/15
150 1900 3125 x 6 25/18.7
 

View Complete Details

Metal Cutting Horizontal Bandsaw

SPECIAL FEATURES : Less power consumption compared to Hacksaw Continuous Cutting by Means of Circular Endless Blade Smoother & Faster Cutting compared to Hacksaw Easy & Precise Gravity Manual Feed Control Makes Optimum use of the blade due to Rewelding of Blade Special Swing cut Operation to cut larger Section Efficient Self Centering Vice Optional Swivel Vice for 30 /45 /60 Angular Cutting Specially Designed heavy duty Gear box Blade Guide Made of Bearing & Carbide Tips Less Material Wastage due to Lesser Blade Thickness Good Parallelism Compared toHacksaw Machine.

Size 7" 8" 10" 12" 14" 16" 18" 20" 24"
Stroke 
(adjustable)
5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5"
No. of Stroke per min. 100 to 120 100 to 120 85 to 100 85 to 100 75 to 85 75 to 85 60 to 85 60 to 85 60 to 85  
Electric Motor Required 1 H.P. 1 H.P. 1.5 H.P. 2 H.P. 2 H.P. 3 H.P. 5 H.P. 7.5 H.P. 7.5 H.P.
R.P.M. 1440 1440 1440 1440 1440 1440 960 960 960
Blade Size 12" to 14" 14" to 16" 16" to 18' 18" to 20" 20" to 22" 22" to 24" 24" to 26" 28" to30" 30" to 32"
Capacity of Round Bar 7" 8" 10" 12" 14" 16" 18" 20" 24"
Capacity of Square Bar 5" 51/2" 8" 10" 11" 13" 14" 15" 18"
 


View Complete Details

Hydraulic Hacksaw Machine.

This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength. FEED:Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut. BED:The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut. ELECTRICAL EQUIPMENT :A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum. DRIVE :Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed. SPEED :The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut. COOLANT :The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.

Size 7" 8" 10" 12" 14" 16" 18" 20" 24"
Stroke 
(adjustable)
5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" 5.5"
No. of Stroke per min. 100 to 120 100 to 120 85 to 100 85 to 100 75 to 85 75 to 85 60 to 85 60 to 85 60 to 85  
Electric Motor Required 1 H.P. 1 H.P. 1.5 H.P. 2 H.P. 2 H.P. 3 H.P. 5 H.P. 7.5 H.P. 7.5 H.P.
R.P.M. 1440 1440 1440 1440 1440 1440 960 960 960
Blade Size 12" to 14" 14" to 16" 16" to 18' 18" to 20" 20" to 22" 22" to 24" 24" to 26" 28" to30" 30" to 32"
Capacity of Round Bar 7" 8" 10" 12" 14" 16" 18" 20" 24"
Capacity of Square Bar 5" 51/2" 8" 10" 11" 13" 14" 15" 18"

View Complete Details

Universal Gear Hobing Machine

Gear Hobbing Machine model V-300 is designed for the production of precision Spur, Helical, Worm Gears, Splines, Sprockets, Rachet Wheels & any other form that can be hobbed. Its bed & column are of close grain casting & are well ribbed with V-type guideways. The shafts & Gears are made of alloy steels. The indexing worm wheel is of high grade Bronze material. The machine is equipped with Differential Mechanism for cutting helical gears. Provision has been made to remove backlash between the indexing worm & worm gear and also between feed screw & the nut of the hob slide. Oil reservoirs are provided in the machine which ensures thorough lubrication of gears & bearings. STANDARD EQUIPMENTS : One Electric Motor 2 H.P. (960 RPM), One Electric motor 1 H.P. (1440 RPM), One Electric Coolant Pump, One work arbour, One Hob arbour, One set of 45 change gears, One set of spanners.


Maximum continuous output (Max. Pitch) 6 D.P. 4 Module
Maximum diameter of Gear with support 14" 356 mm
Minimum diameter of gear 0.375" 10 mm
Face Capacity for Spur gear 8" 203 mm
Minimum number of Teeth 5 5
Face capacity for Helical Gear
Helix angle upto 15° 7" 178 mm
Helix angle upto 30° 6" 152 mm
Helix angle upto 45° 5" 127 mm
Distance between Hob Spindle & Surface of Table (Maximum) 13.5" 343 mm
  (Minimum) 4.5" 114 mm
Axis to Axis distance of Hob Spindle to Table (Maximum) 8.5" 216 mm
  (Minimum) 1" 25 mm
Diameter of work Table 13" 330 mm
Maximum diameter of Hob 3.5" 90 mm
Maximum length of Hob 5" 127 mm
Diameter of Work arbour & Hob arbour 1.25" 32 mm
Hob speeds in R.P.M. 60,75,90,120,150,180  
Feed of the hob slide (Maximum) 0.1" 2.5 mm
  (Minimum) 0.010" 0.25 mm
Main drive motor 2 H.P. 1.5 Kw
Rapid Motor 1 H.P. 0.75 Kw
Coolant Pump 0.16 H.P. 0.12 Kw
Floor space required with cover closed 74" x 34" 1880 x 864 mm
Floor space required with cover opened 82" x 67" 2083 x 1702 mm
Weight of the machine 4840 lbs. 2200 Kg
Height of the Machine 75" 1905 mm
View Complete Details

Hydraulic TestPump

Hydraulic test pump designed for testing pressure cap. of different materials like drums, valves, boilers, barrels, tanks, for pressure vessels and cylinders complete with stand, pressure gauge, check valve and outlet valve with water tank having following specification.

Test pump pressure Kg. CM2 Lbs Sq.  inchTank Cap.lier

70

1000

8

140

2000

8

210

3000

8

350

5000

20

700

10000

20

1000

14000

20

 
View Complete Details

Round Magnetic Chuck

Round Magnetic Chuck.

SIZE OF CHUCK PW PG PP POLES EFFECTIVE AREA
130 mm Dia. 12 12 26 4 100 Dia.
160 mm Dia. 14 14 28 4 125 Dia.
200 mm Dia. 16 14 30 5 170 Dia.
225 mm Dia. 15. 14 29 6 195 Dia.
250 mm Dia. 16 14 30 7 220 Dia.
315 mm Dia. 16 20 36 7 270 Dia.
375 mm Dia. 16 16 32 9 325 Dia.
400 mm Dia. 15 16 31 10 350 Dia.
450 mm Dia. 16 16 32 11 400 Dia.
500 mm Dia. 22 13 35 12 450 Dia.
600 mm Dia. 22 13 35 14 540 Dia.
 

View Complete Details

Jaw Self Centering True Chuck

3 Jaw Self Centering True Chuck.









  1. The width of jaws for 4" x 4" jaw chuck is 0.500 ins.

  2. The size of mounting bolt for 4" x 4" jaw chuck is 1/4" and the hole to suit it is 9/32"

SIZE A B C D E F G H J K Weight in Kgs (Approx.)
ins. 3 Jaw 4 Jaw
mm ins. 80
3
82.5 3.248 46.5 1.831 18 0.739 16 0.630 12.700 0.500 20 1.142 71.3 2.807 61 5.209 3.8 0.150 M5
-
1.8
mm ins. 110
4
110 4.331 60 2.362 22 0.866 22 0.866 15.951 0.628 43 1.693 95 3.740 80 3.150 5 0.197 5/16 3.5 3.5
mm ins. 135
5
136 5.354 60 2.362 30 1.181 22 0.866 15.951 0.628 51 2.008 118 4.646 100 3.937 5 0.197 5/16 5.5 6
mm ins. 165 61/2 165 6.496 68 2.677 40 1.575 28 1.102 19.05 0.750 65 2.559 145 5.709 125 4.921 6 0.236 5/16 8.5 9
mm ins. 200 
8
201 7.913 75 2.953 55 2.165 32 1.260 20.980 0.926 80 3.150 178 7.008 155 6.102 7 0.276 3/8 14 14.5
mm ins. 230
9
230 9.055 83 3.268 70 2.756 33 1.299 23.139 0.911 85 3.347 205 8.071 180 7.087 7 0.276 7/16 21 21.5
mm ins 270 101/2 270 10.630 83 3.268 90 3.543 45.5 1.791 28.550 1.124 100 3.937 245 9.646 220 8.661 7 0.276 7/16 26 28
mm ins. 315 121/2 315 12.402 83 3.268 105 4.134 45.5 1.791 28.550 1.124 109 4.291 290 11.417 265 10.433 7 0.276 7/16 34 36
mm ins. 375 15 376 14.803 93 3.661 140 5.512 49.75 1.959 30.266 1.190 141 5.551 348 13.701 320 12.598 7 0.276 1/2 54 57






View Complete Details

Air Pressure Control Trainer

Air Pressure Control Trainer is set up to compile the fundamentals of closed loop air pressure control and other features related to it. This basically gives an idea regarding air pressure as it is equipped with first quality raw materials sourced from reliable vendors. This is an industrial grade instrument that exhibit realistic working environment.


Features



  • Feedback control

  • P, P+I, P+I+D controller action

  • Sturdy design

  • SCADA software

  • User friendly

  • Leak proof safety measures

  • Increased electrical safety

  • Avail with training manuals and mimic charts

  • Inbuilt safety measures

  • M.S powder coated cubical plant

  • System frame with caster wheel arrangement


Specifications



  • System Dimensions :4.5 Ft. X 1.5 Ft. X 4.5 Ft. (H)

  • Working Pressure :7-8 Kg/cm3

  • Air Compressor Motor :1 H.P

  • Electric Supply :230 V AC

View Complete Details

AC Drive Trainer

Banking on the latest manufacturing unit, we are presenting an array of AC Drive Trainer among our clients. It is used to outline the principle of operation, construction and speed control of motor. Due to their smooth working and easy operation, this trainer is well appreciated globally. Taking the account of our client's specifications, we offer the most appropriate range of systems.


Features



  • SCADA software for graphical user interface (GUI)

  • Digital data display

  • Report generation

  • Computer interface facility

  • Optional components

  • Comprehensive training manual supplied

  • Modern industrial components


View Complete Details

Hydraulic Pullers

Hydraulic puller - Remote controlled comprising of hollow ram cylinder hand operated high pressure, single acting, single piston, Hydraulic pump with pressure gauge adoptor, 2 meter long high pressure rubber hose but without any attachmnets.

in tons in mm Shaft dia. mm
10 75 0-20
20 75 21-50
30 75 51-90
50 100 91-140
View Complete Details

Vertical Bandsaw Machine

Heavy duty vertical bandsaw machine provided with cast iron machine table and guards for safety of the operator with saw guide for alignment of the saw blade complete with suitable electric motor 3 phase 440 volts, motor pulley, V belt starter and motor attachment.


Diameter of wheel in MM 300 450 600 750 900 975 1050
Width of wheels 25 37 50 62 62 75 75
Min. Length of saw blade 2350 3300 3900 5025 6000 6300 6750
Max. Length of saw blade 2400 3750 4275 5400 6600 6750 7200
Depth of cut 162 300 425 550 650 750 825
Distance from saw blade to frame 300 375 575 675 800 900 950
HP of motor 1 2 5 7.1/2 10 12.5 15
Speed of machine RPM 700 850 750 700 600 550 500
Approax. net wt. Kg. 350 480 600 750 1200 1400 1650
View Complete Details

Hand Operated Pipe Bender

  • Working Round Plate 510 x 22 mm
  • Bending Capacity upto 25.4 mm x 8 swg.
  • Working Height 1016mm
  • Overall Dimension Length x Breadth x Height 406 mm x 406 mm x 1016 mm

Hand Opearted Pipe Bender


SPECIFICATIONS Working Round Plate 510 x 22 mm Bending Capacity upto 25.4 mm x 8 swg. Working Height 1016mm Overall Dimension Length x Breadth x Height 406 mm x 406 mm x 1016 mm

View Complete Details

Pyramid Plate Rolling Machine

LongitudalGrooves on Bottom rolls for correct Feeding of Plates. Build in Lubricated Storage. Circumferencialand Axial Grooves on Gun Metal Bearing for even Lubrication. Gun Metal Bush Bearings. Dropendopening system for easy removal of rolled shells. Minimisedfeeding height for easy operation. Well balanced design. Controlled roll speed for accurate curvature performance. Indicators provided for correct even top rollpresure. Mechanical device Mechanism for easy sliding of non drive side top rollhousing. Motor of reputed make. Worm Reduction Gear-Box of reputed make. Reverse Forward starter with overload thermal relay ofreputed make like Siemens/L & T/Cutler Hammer/HKS. One piece fabricated heavy duty base frame. UNIQUE SPECIAL DESIGNED OPTIONAL: Extended rolls (To be orderedalongwithmachine) Dies for rolling of angles, channels, pipes, flats, I-beam etc Attachment for conical rolling. Extra heavy base frame (for site work) Direct coupled gear box with electric motor and electromagneticbrake. Semi automaticcentralisedlubricationsystrm. Feedingplateform. Interchangeable extra top roll to roll shells of smallerdiameter Spilproofre-usable lubrication system. Manual or pneumatic or mechanical shell ejecting device. Remote floating control. Shell support device. Gun metal nuts for smoother manual rotation. 50% thick plates than the rated capacity canbe bent on the machine by hammering actionas shown while the thicker plates have to beprebentoutside the machine. Insert the plate between top roll and bottom roll by adjusting the top roll manually. Apply pressure on the plate by lowering the top roll, thenstart the main motor in forward direction till one end of plate comes over the first bottom roll. Then stop the main motor and reverse its direction so that other end ofthe plate will come on second bottom roll. Repeat the same procedure by applying thepressure from top roll till you get a perfect shell as shown on figure. For removal of rolled shell reduce the pressure of the top roll, make the shell free between top and bottom rolls, remove tilting end bearing of top roll manually and take out the shell, (Please note that top roll isbalancdby means of balancing screw.) Replace that bearing and the machine is ready for next operation.

SR. MODEL CAPACITY DIA.OF TOP ROLL DIA.OF BOTTOM ROLL MAIN MOTOR
NO.   MM MM MM HP
1 PY 3-12 1250 x 3 100 90 2
2 PY 6-12 125O x 6 125 105 3
3 PY 10-12 1250 x 10 150 125 5
4 PY 12-12 1250 x 12 175 140 7.5
5 PY 16-12 1250 x 16 190 150 7.5
6 PY 20-12 1250 x 20 200 160 10
7 PY 25-12 1250 x 25 240 200 15
8 PY 3-15 1500 x 3 115 100 3
9 PY 6-15 1500 x 6 140 11 5 5
10 PY 10-15 1500 x 10 160 135 5
 

View Complete Details

All Geared Lathe Machine Student

All Geared Lathe Machine Student.
Bed is hyperbolic bridge constructed type and specially designed wide opening to easy chip disposal. 2168.
It is heavily ribbed and robust constructed in Banka 35, 36, 43 and 60 models. Hardened & ground bed ways, gears, spindle, spline, shaft, quill, etc. (Turcite B) Linear Bearing System on Carriage. Head stock body is of latest specially designed. The spindle is mounted on selected precision bearings. Spindle speeds in geometric progress ratio. Oil infiltration splash lubrication. American Lo type spindle nose. Gear box arrangement for real time saving equipment. Quick change gear box provides changes of feeds & threads. Separate lead screw & feed shaft for threading pitch accuracy. Apron is totally enclosed oil bath system. T-slot on carriage for mounting special features. Lever type arrangement for automatic feeds. Graduation dial for tail stock & wheel movement. Metric system micro collar for all screws & nuts. Tail stock sleeve is tang shank type for heavy drilling. Easy to operate & Inter changeable parts. Trolley type chip disposal system. Bed is hyperbolic bridge constructed type and specially designed wide opening to easy chip disposal. It is heavily ribbed and robust constructed in Banka 35, 36, 43 and 60 models. Hardened & ground bed ways, gears, spindle, spline, shaft, quill, etc. (Turcite B) Linear Bearing System on Carriage.

Head stock body is of latest specially designed. The spindle is mounted on selected precision bearings. Spindle speeds in geometric progress ratio. Oil infiltration splash lubrication. American Lo type spindle nose.

Gear box arrangement for real time saving equipment. Quick change gear box provides changes of feeds & threads. Separate lead screw & feed shaft for threading pitch accuracy.

Apron is totally enclosed oil bath system. T-slot on carriage for mounting special features. Lever type arrangement for automatic feeds.

Graduation dial for tail stock & wheel movement. Metric system micro collar for all screws & nuts. Tail stock sleeve is tang shank type for heavy drilling. Easy to operate & Inter changeable parts. Trolley type chip disposal system.

View Complete Details

Circle Cutting Machines

Motorised Circle Cutting Machine : Hand Operated Circle Cutting Machine : SIZE SWG 3" to 15" 20 3" to 18" 20 4" to 24" 18 5" to 36" 18 SIZE SWG 4" to 24" 18 5" to 36" 18

Circle Cutting Machines Model No. Drive Type Largest
Circle
Diameter Cut
Smallest Circle Diameter Cut Cutting Capacity Mild Steel SWG Cutting Capacity Stainless Steel SWG Machine Weight
Approx. in Kgs.
Inch MM Inch MM
15 H Hand 15" 3 76.375 20 0.90 20 40
18 H Hand 18" 3 76.455 20 0.90 20 50
24 H Hand 24" 4 101.610 18 1.25 20 80
24 B Bench 24" 4 101.610 18 1.25 20 125
24 M Floor Model 24" 4 101.610 18 1.25 20 175
36 H Hand 36" 5 127.915 18 1.25 20 125
36 B Bench 36" 5 127.915 18 1.25 20 175
36 M Floor Model 36" 5 127.915 16 1.60 18 250
36 F Cabinet 36" 5 127.915 14 2.25 16 600
48 M Floor Model 48" 8 203.1220 10 3.00 14 900



View Complete Details

Shaping Machine











ECHNICAL FEATURES :


  • Duly seasoned alloyed high duty castings

  • Sturdy construction to ensure vibration-free working

  • Ram alignment with taper jib strip

  • Extensive lubrication arrangements

  • Alloy steels shafts

  • All alignments maintained as per geometric alignment test IS : 2310-1963




  • Universal/fixed table with variable automatic feeds on horizontal traverse

  • Expanding ring type clutch drive in all-geared machines to eliminate slippage

  • Graduated tool slide swivelling 90 degrees either way

  • Interchangeability of parts ensured through standardisation and quality control

  • Accuracy and performance guaranteed


A - CAPACITY 12" 18" 24" 30" 36" 42"
Length of Ram Stroke 305 mm 457 mm 610 mm 762 mm 915 mm 1070 mm
Length of Ram 711 991 1232 1474 1651 2108
Length of Width of Ram bearing 724 x 203 686 x 273 867 x 30 975 x 325 1130 x 300 1600 x 330
Max. & Min. distance from Table of Ram 257 x 41 381 x 83 508 x 76 610 x 102 525 x 102 530 x 102
B- TABLE
Working Surface of Table 305 x 228 457 x 305 610 x 356 762 x 406 915 x 457 196 x 533
Max. Table Travel Horizontal 330 483 635 787 860 1050
Max. Table Travel Vertical 140 305 406 483 525 455
Angular Movement of Table on either sides 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R
C - TOOL HEAD
(Max. Vertical Traval of Tool Slide) 140 152 204 203 225 300
Maximum Swivel of Tool Head 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R 60 L 60 R
D - BASE
Length of Width of Base 940 x 483 1346 x 502 1676 x 610 1829 x 660 1980 x 660 2286 x 762
E - SPEEDS & FEEDS
Dia of Clutch Pulley 235 311 311 311 380 380
Range of Ram Speeds 3 4 4 4 4 4
Stroke per minute 30, 60, 90 16, 32, 64, 96 12, 24, 48,72 8,16, 32, 48 10, 20, 30, 50 8, 16, 32, 48
Dia of Motor Pulley 51 70 70 76 88 88
Range of Table Feed per Stroke of Ram 0.299 0.220 0.229 0.229 0-22 to 0-88 150 to 600
Range of Tool Head Feed Hand Feed Hand Feed Hand Feed Hand Feed Hand Feed Hand Feed
Automatic Tool Head Feed & Tool Lifting On Order On Order On Order On Order On Order On Order
F- DRIVE ELECTRICAL EQUIPMENTS
Power Supply 1 HP (75kw) 2 HP (1.5kw) 15 HP (12.2kw) 5 HP (3.75kw) 7.5 HP (5kw) 10 HP (7.5kw)
Speed RPM 1440 RPM 1440 RPM 1440 RPM 960 RPM 960 RPM 960 RPM
V. Belt Section B-55 B-55 B-55 B-58 B-70 B-75
Main Switch Starter (Push Button Type) 3.5 AMP 3.5 AMP 5 AMP 5 AMP 5 AMP 3.5 AMP
G - OVERALL DIMENSIONS & WEIGHT
Length 1219 1580 1981 2150 2500 2875
Width 762 948 1092 1219 1350 1500
Height 1371 1400 1600 1550 1700 1850
Weight (Approx) 700 Kgs 1500 Kgs 2000Kgs 2700Kgs 3500 Kgs 4000 Kgs
View Complete Details

Profile Gas Cutting

HELPS YOU IN CUTTING PRODUCTION COSTS HELPS YOU IN INCREASING PROFITS HELPS YOU IN INCREASINGEFFICIENCY



  • Thickness - 3 mm or 200 mm.

  • Maximum Square cut - 800 mm.

  • Largest Circle possible - 925 mm.

  • Straight cut 1850 mm.

View Complete Details

Universal Milling Machine

Universal Milling Machine.

Working Surface 900 x 210 1000 x 225 1050 x 250 1250 x 275 1350 x 300 1600 x 350
Number & Size of T-Slots 3x 13 3x13 3x13 3x13 3x15 3x15
Distance between T-Slots 45 50 55 65 75 80
             
FEEDS            
Cross 150 160 200 228 279 305
Vertical 300 325 375 432 507 610
Longitudinal 425 475 525 625 675 810
             
SPINDLE            
Arbor 25.4 25.4 25.4 25.4 25.4 25.4
Number of Speeds 6(50 to 1000) 6(50 to 1000) 9(50 to 750) 9(50 to 950) 9(50 to 950) 9(50 to 950)
Taper ISO-30 ISO-30 ISO-40 ISO-40 ISO-40 ISO-40
Distance from Spindle to Top (min. - max.) 10-275 10-300 10-350 10-400 10-500 10-600
             
MOTORS            
Spindle 2H.P. 1440RPM 2 H.P. 1440RPM 2 H.P. 1440RPM 2 H.P. 1440RPM 3H.P. 1440RPM 5H.P. 1440RPM
Coolant 0.10 H.P. 2800 RPM 0.10 H.P. 2800 RPM 0.10 H.P. 2800 RPM 0.10 H.P. 2800 RPM 0.10 H.P. 2800 RPM 0.10 H.P. 2800 RPM
             
WEIGHT            
Net 900 Kg. 1100 Kg. 1400 Kg. 2500 Kg. `3500 Kg. 4000 Kg.
Gross 1100 Kg. 1350 Kg. 1600 Kg. 3000 Kg. `4000 Kg. 4500 Kg.
             
VERTICAL ATTACHMENT ON RAM            
Cross 110-225 125-275 125-350 135-425 135-400 135-535
Vertical 75-300 125-350 150-435 100-500 100-575 100-625
Speeds for Vertical Head (Ram Type)
(380-960)

(380-960)

(160-425)
6
(95-550)

(95-550)

(50-450)
 







View Complete Details

Over Head Router Wood Working Machine

PECIFICATIONS Machine Table Size 750 x 750 mm Distance Between Centre of 600 mm Spindle to Column Motor Power 2 H.P. Motor Spindle Speed Variable from 0 to 18000 RPM Cutter Head Slide Travel 125 mm Guide Pins Dia 3-18 mm

Machine Table Size 750 x 750 mm
Distance Between Centre of 600 mm
Spindle to Column Motor Power 2 H.P.
Motor Spindle Speed Variable from 0 to 18000 RPM
Cutter Head Slide Travel 125 mm
Guide Pins Dia 3-18 mm
 

View Complete Details

Universal Engraving Cum Milling Machine

Rough Milling attachment Single Lip Tool Grinder Indexing workholder Electric Acting Attachment Roll Engraving Attachment Machine vice with seivel base width of 100 mm jaws Rotary table 200 mm Template set A to Z and 0 to 9 height of 20 mm (set of 107 numbers) Machine lamp Dove Tail Strip for Template Auxilary Table STANDARD ACCESSORIES : Electric equipment suitable for 3 phase, 415 Volts, 50 cycles, A C supply. Set of servicing Tools Two clamps for Workholder Two clamps for copyholder One spring collet for cutter spindle One collet for tracing stylus One set of 6 numhers stylus


SPECIFICATIONS
Drive Motor 1/2 B.H.P. 2800 R.P.M. Cord drive
Spindle
Spindle speed range 1800 to 15000 R.P.M.
Spindle fine adjustment 1/8" (3 mm)
Spindle coarse adjustment 1/4" (6.25 mm)
Spindle collet taper 10
Pantograph
Pantograph arm largest 1 : 1
smallest 1 :50
Work Table
Longitudinal Travel 12" (300 mm)
Main slide cross travel 6" (150 mm)
Work table clamping area 12" x 6" (300 x 150 mm)
Work table up and down 10" (250 mm)
Copy Holder Table
Copy holder table clamping area 18" x 10" (450 x 250 mm)
Max. Height between copy holder and pantograph arm 3/4" (20 mm)
Weight 350 K.G. approximately.

View Complete Details

Grinding Machine

Is fitted with four grinding wheels of different shapes & special attachments to sharpen & grinding the dies & cutters of the machine. One 2800 R.p.m. motor is fitted in it.

View Complete Details

Digital Weighing Machine

Our company has established itself as a leading manufacturer, trader and supplier of superior quality Digital Weighing Machine in the market at present. These machines are easy to read and use which are fully automatic and with built in weight for accurate results. Here, our expertise also lies in making these available in both standard and custom tuned specifications. These are made available to the customers at industry leading rates and as per the set industrial standards.
View Complete Details

Digital Micrometer

Our company has earned great laurels as suppliers, manufacturers and traders of Digital Micrometer. This one is a precision measuring instrument, used by engineers. Each revolution of the rachet moves the spindle face 0.5mm towards the anvil face. The object to be measured is placed between the anvil face and the spindle face. These are made available to the customer at industry leading rates and as per the set industry standards. We always ensure the on-time delivery of all of our products.
View Complete Details

Round Hot Plate

Aluminum Cast iron hot plate,
Available with different dia and different rating mounted on powder coated mild steel sheet fabricated body,
Available with energy regulator and without energy regulator.
Maximum surface temp: 400C.
Hot plate dia in cms Rating 20 1.5 KW25 1.5 KW
Optional:- Thermostat 50C to 300C (imported) can be provided.
View Complete Details

Colony Counters

Microprocessor colony counter 6 digit seven segment, range 0-999999 with Averaging, Count Correction and 100 Sample Storage facility.
Microprocessor colony counter 4 digit seven segment, range 0-9999 with Averaging, Count Correction and 100 Sample Storage facility.
Microprocessor colony counter 3 digit seven segment, range 0-999 with Averaging, Count Correction and 100 Sample Storage facility.
Digital colony counter 6 digit LED display, Range-999999
Digital colony counter 4 digit LED display, Range 0-9999
Digital colony counter 3 digit LED display, Range 0-999
View Complete Details

Magnetic Stirrer

Micro magnetic stirrer 500 ml capacity
Magnetic stirrer 1 liter capacity with Digital speed indicator
Magnetic stirrer 1 liter capacity with hot plate with Digital speed indicator
Magnetic stirrer 2 liter capacity with Digital speed indicator
Magnetic stirrer 2 liter capacity with hot plate with Digital speed indicator
Magnetic stirrer 5 liter capacity with Digital speed indicator
Magnetic stirrer 5 liter capacity with hot plate with Digital speed indicator
Request
Callback
Yes! I am interested
a
View Complete Details

Fume Hood Science Lab

The company is well known in the market for the supply and the manufacture of a wide range of Fume Hood which are engaged in the protection of laboratory from the various acid fumes and they offer a high performance to the customers. These products are highly exported to the customers all over the globe and they have been priced at very reasonable rates in the market. These products are easy to operate and they are delivered to the customers on time.
View Complete Details

Reagent Rack

We offer a wide range of Reagent Rack. All these items are fabricated with supreme grade raw material bought from trustful and reliable vendor in the market. These products are uniquely designed by the experts and skilled craftsmen. New innovations and latest technologies are used while making these products. These racks are widely used for various purposes and are durable in nature.
View Complete Details

Wall Rack

Our company has established itself as a leading manufacturer, trader and supplier of superior quality Wall Racks in the market at the present scenario. These are made available to the customers at industry leading rates and are provided as per the set industry norms and protocols as well. We understand that an impressive display plays a very important role in the world of buying and selling. These are easily divided in proper sections and divisions.
View Complete Details

Silver Nitrate

We are known to be the leaders in the industry as the prominent traders and suppliers of Silver Nitrate. This product is process by our professionals who are highly skilled and they use modern techniques. In addition to this, we are highly praised in the industry and the need for our products has increased over the time. We are offering this product in tamper proof packaging and at very reasonable prices.
View Complete Details

Potassium Iodate

Our company has established itself as a leading manufacturer, supplier and trader of superior quality Potassium Iodate. These are made available to our customers at nominal rates. It is an oxidizing agent and as such it can cause fires if in contact with combustible materials or reducing agents. It can be prepared by reacting a potassium-containing base such as potassium hydroxide with iodic acid. This product from our end is used for iodination of table salt to prevent iodine deficiency.
View Complete Details

Reagent Bottle

We put forth an immense range of Reagent Bottle for our clients. Our range is also reckoned as graduated bottles and media bottles. These Reagent Bottles are the containers made using glass, borosilicate, plastic and many others and have a cap or stoppers on the top. Our range is made to carry chemical in the form of both liquid or powder in the laboratories. Owing feature like long shelf life and durability our range is becoming popular amongst the clients.
View Complete Details

Physical Balance

We are recognized as a successful traders, manufacturers and suppliers of Physical Balance. These use one side of the beam bears a constant load and weights are gradually removed to achieve equilibrium. Weighing became much quicker as a result, because knobs could easily control the addition and removal of weight. The enclosed casing ensures that air currents and dust do not disturb the delicate balance, and human error is reduced because the weights are not directly handled.
View Complete Details

Aneroid Barometer

Our rapidly growing organization is offering a quality-oriented Aneroid Barometer. Our offered barometers also displays and amplifies the contraction and expansion that occurs due to changes in the external air pressure.Our offered barometers are completely checked by quality controllers under strict parameters meeting all the norms. Clients can avail these barometers from us at nominal rates.
View Complete Details

Ammeter

We feel immensely pleased to offer an extensive quality array of Ammeter. The offered ammeter is capable of greater degree of sensitivity and accuracy. We deliver this ammeter in well-defined time frame along with various specifications. Offered ammeter is inspected in terms of quality to supply a flawless range.
View Complete Details

Inclined Plane

Our company has established itself as a leading trader, manufacturer and supplier of superior quality Inclined Plane. We comply with the industry norms and provide assorted machines in order to keep our customers contented by fulfilling their required specifications and demands. We manufacture our products which are extremely high at the performance end but very reasonable at the monetary end. This one also known as a ramp, is a flat supporting surface tilted at an angle, with one end higher than the other, used as an aid for raising or lowering a load.
View Complete Details

Optical Bench

The Optical Bench is commonly used in physics labs today, and consists of a long, rigid member with a linear scale applied to it. Holders for light sources, lenses and screens are placed on the apparatus so that image formation can be observed.
View Complete Details

Spectrometer

A Spectrometer is an instrument used to measure properties of light over a specific portion of the electromagnetic spectrum, typically used in spectroscopic analysis to identify materials
View Complete Details

Liebig Condenser

With our sustained efforts & experience manpower, we have been able to offer Liebig Condenser. These products are used to cool the liquid due to which it has become more efficient that simple retort. In comparison to air volume water absorb more heat and the fixed circulation by water jacket keeps the temperature of condenser constant. Our offered products are completely checked by quality controllers under strict parameters meeting all the norms.

Features:
Accurate dimension
Sturdiness
Optimum strength
View Complete Details

Gas Collecting Jar

Sturdily constructed Gas Collecting Jar is manufacture and supply by us. These products are recognized amongst the clients for catering precise performance. Dimensionally accurate this range is available in oval shape along with the hook. Our offered range is made available in the market at industry leading prices. We ensure our prestigious clients to deliver this range in the specific time frame.
View Complete Details

Vacuum Pump

Vacuum Pump offered by us is noted for its excellent functionality and is free from flaws.

Features:

Accurate dimensions
Excellent ability to withstand pressure
High strength
View Complete Details

Vernier Caliper

Other details:

Vernier calliper 5 steel chrome plate
Vernier calliper 5 SS rust proof in plastic box
Vernier calliper IME type 6 steel chrome plated in plastic or velvet box
View Complete Details

Serological Pipettes

We are offering of Serological Pipettes. Manufactured from a single piece of high-grade Polystyrene- no welding at all which ensures that no liquid can be trapped at such locations.

Non- pyrogenic, Non-cytotoxic, Non-Hemolytic
Negative graduation provides additional volume
Insertion of a plug into the top end prevents liquid from penetrating pipettors
Colour-coding system makes identifying the pipette volume quick and easy.
View Complete Details

Centrifuge Tubes

Completely leak proof each tube individually leak tested.
Manufactured from highly transparent, excellent chemical resistance clarity and gloss, antistatic, Polystyrene or Crystal Polystyrene for medical application, high clarity and toughness, high light transferability with minimal light distortion.
Precise, printed graduation alongwith tube and alligned engraved graduation on the cone, to allow easy reading of small volumes.
Clear white marking area
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sunil Mittal (Elab Engineering)
  • F-197/A, Alpha-2 Greater Noida Gautam Budh Nagar, Uttar Pradesh - 201301, India
  • Share us via