Our Products

Laboratory Equipments 10 Products available
Spectrophotometers 8 Products available
Measuring Instruments & Equipment 5 Products available
Photo Meters 3 Products available
Analytical Instruments 1 Products available
- Analytical Instruments
Chemical Analysis Equipment 1 Products available
- PH Analyser
Others Products 6 Products available

Laboratory Equipments

Our Complete range of products are Filter Based Fluorometer, Fuorometer, Water Analyzer, Auto Colorimeter and Ion Analyzer.

Filter Based Fluorometer

RANGE 0 to 0.2, 2, 20 & 200 ppm (w.r.t. Quinine Sulphate)
LIGHT SOURCE Mercury Lamp
PEAK TRANSMISSION OF FILTERS
Primary 366 nm
Secondary Long pass, Cut-off at 475 & 515 nm

In a filter fluorometer, a light source emits light of an excitation wavelength that is relevant to the compound to be measured. Filter fluorometers produce specific excitation and emission wavelengths by using optical filters. The filter blocks other wavelengths but transmits wavelengths relevant to the compound. The light passes through the sample to be measured, and a certain wavelength is absorbed while a longer wavelength is emitted. The emitted light is measured by a detector. By changing the optical filter, different substances can be measured. Highly sensitive, a full scale reading of 199.9 can be adjusted even with 0.2 ppm of quinine sulphate solution in 0.1 N sulphuric acid & primary filter of peak transmission at 366 nm.

View Complete Details

Ask Latest Price & Details

Fuorometer

RANGE 0 to 0.2, 2, 20 & 200 ppm
Primary 366 nm

ilter fluorometer, a light source emits light of an excitation wavelength that is relevant to the compound to be measured. Filter fluorometers produce specific excitation and emission wavelengths by using optical filters. The filter blocks other wavelengths but transmits wavelengths relevant to the compound. The light passes through the sample to be measured, and a certain wavelength is absorbed while a longer wavelength is emitted. The emitted light is measured by a detector. By changing the optical filter, different substances can be measured.

View Complete Details

Ask Latest Price & Details

Water Analyzer

Microprocessor based Multi Parameter Water Quality Analyser. Measures directly pH, EMF, Temperature, Electrolyte Conductivity EC, Total Dissolved Solids TDS, Dissolve Oxygen DO & Salinity, Colorimetric, Abs.%T and Turbidity in Water Sample one at a time. Light weight, Portable and Easy to carry on field, Unique DO measurement in Air saturated waters using Conventional Polarographic Probe, Programmable Calibration upto 3 points for pH with Memory Back-up, Userful for Potentiometric & Redox measurements, Accurate & Highly Stable, Elegantly styled into a Briefcase for operational convenience in Field, Operates on Rechargeable Battery & Mains Supply.

View Complete Details

Ask Latest Price & Details

Auto Colorimeter

Long Life LED Light source, Long Life Photo Diode Detector, User friendly operation, Last factors used for C1 and C2 will be stored along with last wavelength and the last scale even on power turn off, Auto Zero Facility, Auto Storage Facility for Concentration, Immune to ambient light variations, Compact, Rugged, Sturdy, Reliable and Easy to Operate, Only 1 ml of sample needed.

View Complete Details

Ask Latest Price & Details

Ion Analyzer

Accuracy ±0.001*
Repeatability 0.001
Range 0 to 14 - 10-9 to 100

Microprocessor based Three Channel Ion Analyser with Printer Interface, Direct measurement of pX (activity), pH, ORP, EMF, Concentration and Temperature, Programmable calibration upto 10 points with Memory Backup, Analysis - by direct & Incremental (Standard & Analyte addition & subtraction) methods, Standard Data Storage Facility, Unit Conversion possible in concentration analysis, Automatic Temperature Compensation, Slope Correction and Asymmetric Potential correction for pH, Pt 100 based Temperature measurement, Open Temperature Sensor Indication, Optional PC Compatibility with RS232C Interface.

View Complete Details

Ask Latest Price & Details

Ion Analyser

TEMPERATURE COMPENSATION 0 to 100°C Auto /Manual
SENSOR INTERFACE Input Impedance Ω @25°C
>10(13) Receptacle

LI-126, Microprocessor based Three Channel Ion Analyser with Printer Interface, Direct measurement of pX (activity), pH, ORP, EMF, Concentration and Temperature. Programmable calibration upto 10 points with Memory Backup. Analysis - by direct & Incremental (Standard & Analyte addition & subtraction) methods.

MODE	pH	pX(Activity)	mV	Temp °C	Concentration (M)
Range	0 to 14	-2 to +20	±2000	0 to 100	10^-9 to 10⁰
Accuracy	±0.001*	-- ⁽¹⁾	±1	±0.2	--
Repeatability	0.001	0.001	0.1	0.1	--

View Complete Details

Ask Latest Price & Details

LED Based Colorimeter

SAMPLE VOLUME Min. 1 ml
SAMPLE HOLDER 75 x 12 mm ± 0.5 mm Test tube with 10 mm Path Length
HOTOMETRIC RANGE % Transmission
0 to 250 Absorbance
-0.31 to 2.0 Abs Repeatability
± 0.01 Abs Readability
%T 1
Abs 0.01

CL-223, Microcontroller based digital colorimeter, Long Life LED Light source. Long Life Photo Diode Detector. Last factors used for C1 and C2 will be stored along with last wavelength and the last scale even on power turn off. Auto Storage Facility for Concentration. Compact, Rugged, Sturdy, Reliable and Easy to Operate.

View Complete Details

Ask Latest Price & Details

HPLC BINARY SYSTEM

SPECTRAL Range
190 to 800 nm Bandwidth
4 nm Readability
0.1 nm Accuracy
± 0.5 nm Repeatability
± 0.2 nm PHOTOMETRIC
Range 0 to 3.0 AU
Sensitivity Range 0.001 AU to 3.000 AU
Readability 0.0001 Abs
FLOW CELL Type
Analytical Path Length
10 mm Material

The Variable wavelength UV-VIS Detector features high sensitivity with absorbance ranges from 0 to 3.0 AU. High performance Pulse free pump with low dead volume diaphragm type pulse damper. Easy exchange of the Flow cells, Injection loops allows using the system for all applications between Micro upto preparative HPLC.

View Complete Details

Ask Latest Price & Details

Hplc Isocratic System

SPECTRAL Range
190 to 800 nm Bandwidth
4 nm Readability
0.1 nm Accuracy
± 0.5 nm Repeatability
± 0.2 nm PHOTOMETRIC
Range 0 to 3.0 AU
Sensitivity Range 0.001 AU to 3.000 AU
Readability 0.0001 Abs
FLOW CELL Type
Analytical Path Length
10 mm Material

HPLC systems are ideal for routine use and quality assurance applications and are perfect for tight spaces and smart budgets. The Variable wavelength UV-VIS Detector features high sensitivity with absorbance ranges from 0 to 3.0 AU. MS Windows based Elichrom software provides complete system control, Data Analysis and multiple reporting options.

View Complete Details

Ask Latest Price & Details

Water Quality Analyser

PE-138, Microprocessor based Multi Parameter Water Quality Analyser. Measures directly pH, EMF, Temperature, Electrolyte Conductivity (EC), Total Dissolved Solids (TDS), Dissolve Oxygen (DO) & Salinity, Colorimetric, Abs.%T and Turbidity in Water Sample one at a time, Light weight, Portable and Easy to carry on field,

PARAMETER	pH	EMF (mV)	Temp (°C)	Salinity
Range	0 to 14	±1999.9	0 to 100	0 to 40 ppt
Readability	0.001	0.1	0.1	--
Accuracy	±0.001*	±0.1	±0.5	±1%⁽¹⁾
Repeatablility	±0.001	±0.1	±0.1	--
INPUT
Sensor	CE/GE & RE	CE/GE & RE	Semiconductor	ISE (Cl) & RE
Impedance@25°C	>10¹³	>10¹³	--	--
Receptacle	BNC, Banana	BNC, Banana	Banana	BNC
Temp. Compensation	0 to 100°C A/M	--	--	0 to 50°C A/M