Our Products

Other Products / Services #998414

Toroidal Core

The shape of the core is such that the magnetic field of the toroid is contained within itself. Hence theres no radiation of stray magnetic flux and the Transformer can be placed in high density electronic circuitry without any interfering hum. Leakage inductance and stray capacitance are also very small. And when the Toroidal Transformer is placed in an interfering field, the interfering forces tend to act equally all around the toroid, resulting in the cancellation of interfering voltages in the coils in a manner similar to the astatic windings.

View Complete Details

Ask Latest Price & Details

Dc Power Pack

Input voltage 230 VAC

We also offer DC power pack with the breaker fault tripping facility and can be charged faster within 12 Hrs. The specifications are as follows:DC power pack for breaker fault tripping, Input voltage 230 VAC, Output voltage 30 V 200 VA, Charge 30 V up to 12 hrs, Mild steel powder coated cabinet.

View Complete Details

Ask Latest Price & Details

Time Interval Meter

Output current 0 to 5V / 10 Amp / 0 to 50V / 1 Amp

Input Supply:230V AC, Output current:0 to 5V 10 Amp 0 to 50V 1 Amp, Output Voltage D1:0 to 250V AC 0 to 300V AC, Output Voltage D2: 0 to 250V AC 0 to 300V AC, Potential free contact:nonc @ 6 Amp, Timer:9.99999.99 999.99999 sec. Timer sense nonc contact.

View Complete Details

Ask Latest Price & Details

Current Injector

DIMENSION(WDH) 450 X 650 X 375 MM
WEIGHT 60 TO 65 Kg. Approx

We also offer our range as per the designs, capacities specified by our clients and test these transformers as per ISI Standards, and a host of others.INPUT VOLTAGE:230 V AC 50 Hz Single phase 30 Amp, OUTPUT VOLTAGEl:0 to 2000 Amp AC, OUTPUT CURRENT:Electrical Protection against over & short By Fuse, ON-OFF PUSH BUTTON:Provided to ON & OFF indicator push button Green push button to press start the unit and red push button press for stop the unit, METERING:Digital Panel Current Meter provided to monitor Output Load Current.

View Complete Details

Ask Latest Price & Details

Oil Test Unit (BDV) MODEL ESPBDV6O

We also offer oil test unit (BDV) . It generate AC variable high voltage through varaic . Noise free output heavy duty transformer operating type motorize or manual BDV is made up on M S Powder coated cabinet.

SPECIFICATION

INPUT VOLTAGE

230VAC +/- 10% , 50Hz

OUTPUT KV VOLTAGE

0-60 KV

FEATURES

MODE OF OPERATION

By Manual

BY MOTORISE

»	SENSITIVE ELECTRONIC TRIPPING CIRCUIT.
»	HIGH VOLTAGE TRANSFORMER WITH EPOXY RESIN CAST.
»	INTERLOCK ZERO START.
»	DOORLOCK PROTECTION.
»	AUDIO BUZZER ON TRIP CONDITION.
»	HV ON- OFF, TRIP INDICATION
»	10mm ACRYLIC OILCUP FOR 1 ltr OIL CAPACITY.
»	HOLD BRAKE DOWN READING

APPLICATION

FOR TESTING DI - ELECTRIC STRENGH OF INSULATING OILS AND LIQUIDS THROUGH SMOOTH VARIABLE OUTPUT VOLTAGE

AVAILABLE MODELS

80 KV & 100 KV

View Complete Details

Ask Latest Price & Details

Line Chokes

We have standard designs for input and output line chokes as per customer's requirements of Ac & Dc Drives. We can design filters to support harmonic mitigation & Power Factor Controllers, where the chokes are built to reduce harmonics. These find application in systems like Battery Chargers, AC DC drives, UPS.

View Complete Details

Ask Latest Price & Details

Servo Controlled Voltage Stabilizer

Espee Servo Controlled AC Voltage Stabilizer continuously variable auto transformers consist of :

	Motorised Dimmerstat
	AC Step Synchronous motor.
	Surge suppression like MOVS
	Buck Boost Transformer ( Copper wound & CRGO Lamination)
	Sensing and control circuits.
	Protection circuits for under / over voltage, single phasing, phase reversal and overload etc.

Features:

	Zero waveform distortion.
	Unaffected by load power factor and supply frequency variation.
	+/- 1% Regulation.
	High Speed correction up to 40 V /Sec.
	Continuous duty cycle.
	LED indications for power On, output under / over voltage
	Operating by Auto/Manual.
	Digital Meters

Technical Specifications:

1	Input Voltage	:	170 VAC to 270 VAC for Single Phase
			320 VAC to 470 VAC for Three Phase
2	Output Voltage	:	230 VAC +/- 1% for Single Phase
			415 VAC +/- 1% for Three Phase
			or ( As per your requirement)
3	Capacity	:	1 KVA to 15 KVA Single Phase
			1 KVA to 500 KVA Three Phase
4	Cooling	:	Air Natural Cooled / Oil Natural Cooled
5	Standard	:	IS 9815

View Complete Details

Ask Latest Price & Details

Oil Testing Machine
Get Best Quote

Tell Us What are you looking for? Will call you back

Contact Us

P. A. Yavagal (Espee Electricals)
Gala No. 113, Amar Industrial Estate, Shankeshwar Nagar, Nandivli Bhopar Road, Dombivli East Thane, Maharashtra - 421 204 - 421204
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.