Type : Indoor / Outdoor : Temperature Rise (Max.) : Designed for 30-35 Deg C above ambient as on top of Oil full load (Against IEC Standard of 45 Deg C)
Mounting : Uni-directional Wheels : Correction rate : 6-15V/Second (up to 500kVA) and 3-6V/seconds (above 500kVA)
Output Voltage : 400V +/-1%, 3-Phase, 50Hz : Cooling : Natural Oil Cooled (up to 5000kVA) / Air Cooled (up to 4000kVA)
Type : Indoor / Outdoor : Temperature Rise (Max.) : Designed for 30-35 Deg C above ambient as on top of Oil full load (Against IEC Standard of 45 Deg C)
Mounting : Uni-directional Wheels : Correction rate : 6-15V/Second (up to 500kVA) and 3-6V/seconds (above 500kVA)
Number Of Flower : Balanced (Common Control For All Three Phases.\n Suited For Balanced Input Supply & Up To 40 % Unbalanced Load)Unbalanced (Individual Phase Control. Suited For Unbalanced Input Supply And Unbalanced Load)
Technology : Linear Type On-Load Voltage Regulators with Stepless Regulation (also referred to as Vertical Rolling Contact or Columnar Design)
Core : CRGO Lamination Best Grade
Frequency : 50 / 60 Hz ± 5%
Mounting : On Unidirectional Wheels
Supply Type : Manufacturer
Load Variation : Admitted from 0 to 100%
Installation : Indoor / Outdoor as per site requirement
Fast response : The advanced electronic control circuit ensures a fast response, from 11 to 50 ms/Volt according to
Overload capacity : A typical characteristic of the Ministab and Sterostab is its regulation system. In fact, they can s
Unaffected by power factor and load variations : The Ministab and Sterostab operating principleensures that the equipment accuracy and regulation spe
Supply Type : Manufacturer
Accuracy : Ministab and Sterostab ensure the “true RMS value” of the voltage with an accuracy range that varies according to the model from ±0.5% to ±1.5%, even where strong harmonic distortions are present on the line.
Conformity to standards : Ministab and Sterostab conform to the requirements of the following standards: Electro Magnetic Com
Unaffected by frequency variations : The servomotor control circuit operates correctly withmains frequency variations up to ±5%.
Negligible waveform distortion : The high quality materials and their correct use ensure that harmonic distortion is always less than
Low intemal impedance : Installation of Ministab and Sterostab in already existing systems does not require new calculations
Reliability : The continual improvements that the Ministab andSterostab have undergone over the last 50 years of
We are offering H.t. Automatic voltage. Stabilizer even after the installation of standard distribution transformer with oltc the problem of low high voltage above the rated voltage persist on the lt side due to the limitedtypical operation of the...
Recons Power Equipments is Manufacturer, Exporter & Supplier of HT Automatic Voltage Stabilizers , Auto Wound Transformers having helical coils mounted on a conventional laminated core. Carbon Rollers assembled on a fiber glass carrier board...
RECON'S Automatic Voltage Stabilizers are Auto Wound Transformers manufacturers having helical coils mounted on a conventional laminated core. Carbon Rollers assembled on a fiber glass carrier board traverse the length of the Coil Track. These...
We are one of the prominent manufacturer and supplier of three phase servo voltage stabilizers, we are engaged in providing a wide quality range of our products to our valuable clients as per industry standard. specifications: parameter three phase unit rating 3 kva to 5000 kva...
For Buyer 
For Seller 
Help 
