Our Products
FFV make Diaphragm Control Valve with Electro Pneumatic Positioner.Diaphragm Control valves Pneumatic Actuators can be either
(a)Air to Open or(b)Air to Close.Designed is such that if the air supply fails, the control valve will be either fully open, or fully closed, depending upon the safety requirement of the process.
On-off type or modulating type FFV make control valves are widely used for machinery, and plant engineering for steam controlling lines, thermic fluid lines, various liquid lines, heat exchanger, pumps pipes lines & gases.
FFV make Pneumatic rotary actuators butterfly valves are available in double acting or single acting type.These are simple and reliable method of automating butterfly valves.
FFV make 2 way diaphragm type solenoid valves are classified as Normally Closed or Normally Open based on the valve condition these valves are design as Internal & External Pilot Operated.
In construction of valve internal pilot holes is been design such it uses the line pressure for its operation define as differential pressure. When the coil is energized, it opens the pilot orifice and releases pressure to the outlet side of the valve.
FFV Pulse Valve have to been designed for quick open and close which results in effective Cleaning & air consumption.While the pulse valve is closed the compressed air is trapped between diaphragm and solenoid valve orifice.When solenoid valve is energized, the air trapped above the diaphragm is quickly exhausted through the pilot solenoid valve, causing fast opening of the main pulse valve.When the pilot solenoid valve is de-energized the inflowing compressed air lifts up the diaphragm and flows through the outlet of the pulse valve & the air gets trapped, closing the diaphragm as a result of pressure equalization.
Pulse Valve It is used majorly in dust collector system, pulse jet filters, bag filters on lime, Coal Injection System for blast furnace which all are used in industries like feed, fabric industries, food processing powder, cement, coke ash lime, chemical, coke oven, Coal Preparation Plants & related systems, flue gas system, furnace etc.
FFV offers Low Pressure Solenoid Valve Pilot Type /Low Pressure Solenoid Valve Piston Type.
FFV offers Double Acting / Single Acting Pneumatic Cylinder Operated Knife Edge Gate Valve.
FFV offer motorized control valves.these Electrical Actuator operated Control valves are design for on-off and throttling applications.these are widely used in oil and gas production industry.Where availability of power supply are in Wide range & from remote controlling room it is been operated.
Fluid Force Valves Offer Quarter Turn Electrical Actuator operated butterfly valves are design for on-off duty, inching type & modulating applications.These are widely used in control of Air, Gas, Steam, Oil & Water in various sector like power generation, water treatment plant, sugar industries, chemical, petrochemical industries, pumps testing units, Steam boilers, HAVC & Plumbing, Gas Generator, Textile and in Process Automation, Damper Actuators.
Fluid Force Valves Provide Gear Operated, Pneumatic actuator Operated or Electrical Actuator Operated
Investment Casting, Sand Casting, Carbon Steel, Cast Iron, Gun Metal.
Fluid Force Valves Provide Gear Operated, Pneumatic actuator Operated or Electrical Actuator Operated
Investment Casting, Sand Casting, Carbon Steel, Cast Iron, Gun Metal.
FFV manufacturer of Cast Steel, Investment Casting, Cast Iron body Swing & Lift type Check Valve.
FFV make Hinge Pin Design Non return Wafer Check Valve.
FFV Dual Plate Check Valves should be installed in horizontal flow with pins Vertical for best performance with Wafer Design, Intigral soft seated with spring action.
Petrochemical, Industrial Piping, Power Generation, Onshore, Offshore & subsea pipeline application, Oil and Gas Production.
FFV Make Centric Disc, Off Set Design, Double Off Set Design, Damper Valve- Fabricated Butterfly Valve.
Due to mechanically force or pressing of roller lever cam results in shifting of spool of the valve to different position and the valve is been actuated.The valve is returned to the normal position through return spring after release of the Roller lever.
Through exhaust port the air is been discharges for positive return.
FFV make 3/2 Way & 5/2 Way Single Coil / Double Coil Solenoid valves are commonly used in various sizes & variety of Pneumatic Actuator.Suitable for lubricated or non-lubricated supplies exchangeable solenoid for all.Used in application, including petrochemical, pulp and paper, filling equipment, food processing and water treatment.It has a high flow rate capacity and Large Internal Flow Area which Enables usage on a large range of actuators also.It has a Rapid response time (up to 4 cycles/sec) continuous duty cycle with reliable NBR Soft seal Spool.
Direct Activated Pressure Reducing Valve directly opens and close valve gate by the outlet pressure.
When outlet pressure is under setting pressure, Valve gate automatically opens, to make valve gate fully open, adjustable pressure range and setting pressure are relative points.
FFV Disc Check Valve make in Investment Casting SS 304, SS 316 With Spring Loaded, Soft Seated Teflon.
FFV Make Single Piece Design High Pressure Needle Valve, Stainless Steel, Bar Stock Body Needle Valve.
Single Piece / Three Piece Design
Body / Ball / Stem Material UPVC
25 mm to 200 mm available size
Seat Material Teflon / PTFE
Flanged End / Screwed End / Socket Weld End
Body / Disc / Stem Material UPVC
25 mm to 200 mm available size
Seat Material Teflon / PTFE
Wafer type
Single Piece / Three Piece Design
Body / Ball / Stem Material Polypropylene
25 mm to 200 mm available size
Seat Material Teflon / PTFE
Flanged End / Screwed End / Socket Weld End
Body / Disc / Stem Material Polypropylene
25 mm to 200 mm available size
Seat Material Teflon / PTFE
Wafer type
Body / Bonnet Polypropylene
25 mm to 200 mm available size
Diaphragm Neoprene Rubbers
Flanged End