Other Products / Services #2377897

The tank is made out of 16 to 10 swg as per requirement. it is provided with lid, a drain cock at the bottom and is mounted on castor wheels (optional). The tank is argon arc welded and mirror/matt finish from inside and outside.

Tanks/Vessel with jacket with/without insulation can also be made as per requirement. Heating process either by electric heater or by oil heater.

Description:

The unit consists of a strong stainless steel tank with top cover, SS handle, pressure gauge and tightening bolt. The set of SS filter plates with perforated screen, filter pads & interlocking cups are fitted in the center of the tank. It is fitted with either SS gear pump or centrifugal pump. The complete unit is mounted on SS trolley with castor wheels. The unit is provided with bypass system, safety valve and an arrangement to use the pump as transfer pump depending upon model.

Technical Details:

• Available Model : 8 Diameter, 14 Diameter & 18 Diameter with no. of plate of various size & depth.
• All the above model are available in two type of model called as Sprakler Filter Press & Zero Holdup Sparkler Filter Press
• With transfer facility
• Model selection depend upon filteration area of filter press, cake holding capacity of filter press, flow rate or filteration rate & amount, size, percentage, physical & chemical properties of impurities.
• Based on chemical properties of liquid & contaminant different material of construction (MOC) is being used namely SS304, SS316, SS316L, PP, (with Teflon coating)etc.

Salient Features of Zero Holder Filter Press:

• Full Batch recovery of the filtrate
• Uniform distribution of the cake on each plate
• Complete cake retains on the plate
• Single pass clear filtration
• Less exposure to the operation person
• No contamination of the internal surface of the shell

Optional Features:

• For hot filtration application SS Jacket can be provided around and at the bottom of the shell
• Filter Provided with centrifugal pump / Gear Pump / Lobe Pump with TEFC or FLP Motor
• Back wash facility to take number of batches without opening the filter
• Sight glass in tubular type can be provided at the outlet for visual check flow of filtrate

Manual placing of plug / Cap on the top of the bottle. Speed of the plug pressing is synchronize with the speed of the conveyor in order to perform pressing action of plug on the bottle without spillage of liquid. conveyor belt brings bottle with plug under pressing unit, where bottle with plug comes in contact with continuous rotating endless belt, which in turn press the plug on the way to exit.

The machine is provided with in-built SS Slat Chain Conveyor of suitable length and the Inner Plugs are pressed automatically when they pass through the inclined belt pressing arrangement provided in the machine. The machine is suitable to handle different types of inner plugs comfortably.

Technical Details:

• Direction of movement left to right
• Available for various height bottle
• 0.25 HP Motor
• Fitted with variable frequency drive (A/C Drive) for synchronization with filling conveyor

Salient Features:

• Adjustable for various height bottle
• Variable speed
• Suitable for Plug Pressing, Cap Pressing, Inner Plug Pressing & various other type of cap
• Available with GMP Model & Powder coated Model.

Automatic bottle washing machine is designed to clean various types of glass bottles or plastic/metal containers, by subjecting to a series of distinct, processing operations. The washing is of various duration.

The machine consists of two stainless steel tanks one for hot detergent and other for fresh water. Both are fitted with independent stainless steel centrifugal pump. The hot detergent tank shall be fitted with thermostatically controlled heater. The rated capacity is approx 3600 containers/hr.

Specifications:

Motor for main drive: 0.5 hp 415 V, 3 PhaseMotor for pump: 1.0hp 415 V, 3 PhaseElectric heater: 3 kw

Available Models:

• 64 Jets
• 96 Jets

The unit consists of motorized brushing unit with two chucks to hold various size of brushes mounted on Stainless steel socking tank. One side of tank is fitted with twelve SS rinses with water tap connection.

Available Models:

• Two Head with 12 rinsers with SS Tank
• Four Head with 24 rinsers with SS Tank