Our Products
Specifications
Measuring media | Unit | Liquids which are compatible with 316 L ss | |
Measuring ranges | mH2o | 0~0.2, 0~0.5, 0~1, 0~2, 0~5, 0~10, 0~20, 0~50, 0~100, 0~200 | |
Overload pressure | % Fs | 150 | |
Output Signal | Transducers | mV | 80 (full scale output @1 Ma) |
Transmitters | MA or Vdc | 4~20 mA (standard), 0 ~ 5 V or 0 ~ 10 V | |
Power Supply | Transducers | MA | 1 (recommended), 0.5, ...2 |
Transmitters | Vdc | 24 (recommeded), 12, ...2 | |
Accuracy | % Fs | +0.25 (standard), + 0.5 | |
Long-term stability | % Fs/year | < + 0.5 | |
Response time | ms | < 1 (10% ~ 90% OF leading edge) | |
Input resistance | Transducers | O | 2000~80005:21 PM 10/8/2013 |
Output resistance | Transducers | O | 3500~6000 |
load Resistance | Transmitters | O | 250~1150 |
insulation resistance | MΩ@ 500 v dc | > 500 (Transducer only) | |
storage temperature range | oC | Err:502 | |
Operating temperature range | oC | 0 ~ +80 | |
compensated temperature range | oC | 0 ~ +50 | |
temperature coefficient of Zero | % FS / oC | 0.02 | |
Temperature coefficient of span | % FS / oC | 0.02 | |
Process connection | - | Submersible in | |
Electrical connection | - | 4- core Ø 7.6mm shielded cable with vent hose which is me chanically strong enough for deep submersible liquid level measurements | |
pressure membrane material | - | 316L SS | |
Housing material | - | 316 SS | |
Environmental protection | IP rating | IP 68 | |
Weight | gram | 200 (probe head) + weight of cable |
Graph
Note : The listed specifications and dimensions are subject to change without prior notice.
Download
Technical Data
Overall Length | 300 mm to 5000mm |
---|---|
Measuring Error | ±0.25 % or Span |
Output Temperature Co-efficient | ±0.007% / oC |
Resolution | 5mm / 10mm |
Ambient Temperature | -40oC to 60oC |
Liquid Temp. Range | -40oC to 120oC |
Liquid Min. Density | 0.8 gm/cc |
Max. Pressure | 10 kg/cm2 |
Protection category | Weather proof Ip66 to IS : 2147 (or) Flame Proof Gr. IIA & IIB to IS : 2148 |
Terminals | Max. 1.5mm2 Flexible |
Cable Entry | PG11 for weather Proof ¾" Et for Flame proof (Glands not supplied) |
Current Output | 2 wire, 4... 20 A 3 wire, 0-10 Vdc |
Process Connection | Threaded Flanged Tri clamp Others |
Excitation Voltage | 10-36 V DC |
Loop Resistance | Max. 1200 Ohms |
Graph
Download
Technical Data
Overall Length | 300 mm to 5000 mm |
---|---|
Measuring Error | ±0.25% of span |
Output Temperature Co-efficient | ±0.007% / oC |
Resolution | 10 mm |
Ambient Temperature | -40oC to 60oC |
Liquid Temperature Range | -40oC to 120oC |
Liquid Min. Density | 0.8 gm/cc |
Max. Pressure | 10 Kg/Cm2 |
Protection Category | Wheather Proof Ip66 to IS:2148 or Flame Proof Gr. IIA & IIB to IS:2148 |
Terminals | Max. 1.5 mm2 Flexible |
Cable Entry | M20 for Weather Proof 3/4" ET for Flame Proof (Glands not Supplied) |
Current Output | 2 Wire, 4,, ,,20 mA |
Process Connection | 2 1/2" BSP (Threaded) 2 1/2" ANSI 150# (Flanged) |
Span Suppression | Min. 30% of Span |
Zero Elevation | Min. 25% of Span |
Excitation Voltage | 10 - 36 V DC |
Loop Resistanve | Max. 1200 OHMs (Ref. Excitation Voltage v/s Loop Resistance Graph) |