Write a Review
Our Products
Our offered Product range includes Flexible Graphite Sheet, Reinforced Graphite Sheet and Ceramic Textiles.
Flexible GraphiteFoil is made with pure expanded mineral graphite. Our flexible graphite sheet has a high purity of 99% carbon content. Higher carbon content gives the flexible graphite better chemical resistance, better thermal conductivity, and better sealability. As gasket material, it is usually fabricated into Graphite Laminate, reinforced graphite sheet and widely used in fluid sealing applications: flange gasket, spiral wound gasket, heat exchanger gasket, etc. It can also be used as solid lubricant in metal stamping and forming applications, or as heat liner in industry furnaces and other heating devices.
High Carbon content 99% Min.
Contains no rubber or binder, 100% Asbestos free.
Widely working temp. from -200 to +3300 in non-oxidizing.
Chemistry resistance, oxidation resistant and corrosion resistant.
|
FIE-1101 |
FIE-1102 |
FIE-1103 |
||
|
Density |
1.0g/cc |
1.0g/cc |
1.0g/cc |
|
|
Density Tolerance |
±0.03g/cc |
±0.03g/cc |
±0.03g/cc |
|
|
Thickness Tolerance |
±0.03mm |
±0.03mm |
±0.03mm |
|
|
Carbon Content |
99.7% min |
99% min |
99% min |
|
|
Ash Content |
≤1% |
≤1% |
≤1% |
|
|
Chloride Content % |
20ppm Max. |
30ppm Max. |
50ppm Max. |
|
|
Sulphur Content % |
200ppm Max |
500ppm Max |
1000ppm Max. |
|
|
Working Temperature |
Oxidizing |
500℃ |
500℃ |
500℃ |
|
Steam |
650℃ |
650℃ |
650℃ |
|
|
Non-Oxidizing |
3300℃ |
3300℃ |
3300℃ |
|
|
Pressure |
140bar Max. |
140bar Max |
140bar Max. |
|
|
Tensile Strength |
≥5.0Mpa |
≥4.8Mpa |
≥4.8Mpa |
|
|
Compressibility |
35%-55% |
35%-55% |
35%-55% |
|
|
Recovery |
≥12% |
≥11% |
≥10% |
|
|
PH |
0-14 |
0-14 |
0-14 |
|
|
Carbon min(%) |
Density (g/c.c) |
Thick (mm ) |
Width (mm) |
Length(mm) |
|
|
Sheets |
99 |
0.7 to 1.2 |
0.2-6.0 |
500, 1000, 1500 |
1000, 1500 |
|
Rolls |
99 |
0.7 to 1.2 |
0.2-1.5 |
500, 1000, 1500 |
30M,50M,70M,80M, 100M(Rolls) |
Reinforced Graphite Sheets are made with pure flexible graphite sheet reinforced with stainless steel foil or wire mesh inserted. There are two basic types: mechanically bond (Tang inserted) and adhesive bond. Reinforced graphite laminate sheets are ideal sheet gasket materials for most industrial fluid sealing applications.
Style |
Insert |
Bond |
Applications |
|
FIE-1200 |
With no insert |
Adhesive |
Used for flange gasket in low pressure sealing condition, for metal jacketed gaskets, corrugated metal gaskets, head exchanger gaskets. |
|
FIE-1201 |
0.10mm thick SS316 or SS304 tanged |
Mechanically |
Reinforced Graphite Sheets are ideal sheet gasket materials for most industrial fluid sealing applications. They resist corrosive chemicals, high temperature, and high pressure. Recommended to be used in refineries, chemical and petrochemical plants, paper mills, mines and other industrial fields. |
|
FIE-1202 |
0.05mm thick SS316 or SS304 Flat Foil |
Adhesive |
|
|
FIE-1203 |
SS316 or SS304 Wire Mesh |
Adhesive |
|
|
FIE-1204 |
Glass Fiber |
Adhesive |
|
|
FIE-1205 |
0.20mm thick Tinplate Tanged |
Mechanically |
Recommended for automotive and other combustion engine applications, or similar sealing conditions. Typically it is used for head gasket, exhaust gasket. |
Nirav Parekh (Flips India Engineering)
B-30, Nandkishore Industrial estate, Opp Paperbox, Off Mahak, Andheri East, Mumbai, Maharashtra - 400093
Share us via
