Verified
Write a Review
Our Products
Machine And Precision Tools
1 Products availableOur offered Product range includes Light Duty Lathe Machine, Medium Duty Lathe Machine, Heavy Duty Lathe Machine, Capstan Lathe Machine and Extra Heavy Lathe Machine.
Bed :Bed & all Casting Parts are manufactured in our Foundry. The Bed is made from A graded Casting 2V & 2 Flat type. Hardened & Ground Bed ways.
Head Stock :Head Stock Body is of latest specially design induction hardened & Ground spindle of special alloy steel. All centrifugal running parts are well balanced.
Apron & Norton :A four walled closed type with oil bath apron & norton having a best quality gears. Sliding & Surfacing feeds can be engaged by tightening a star knobs & engaging lever at appropriate position.
Tail Stock :Hexagonal shapped body. Tail Stock spindle having external & internal grinding with MT-4 Internal Tapper is provided. It can be off set for tapper turning.
| SPECIFICATION | 4'1/2" (1370 mm) | 6' (1825 mm) | ||
|---|---|---|---|---|
| INCH | MM | INCH | MM | |
| Bed Width | 11" | 279 | 11" | 279 |
| Height of Center Over Flat Bed Ways | 9" | 226 | 9" | 226 |
| Maximum Swing over bed | 17" | 432 | 17" | 432 |
| Maximum Swing over Cross Slide | 11" | 280 | 11" | 280 |
| Maximum Swing in Gap | 26" | 660 | 26" | 660 |
| Admit Between Centre | 18" | 457 | 36" | 915 |
| Spindle Nose | 6 TPI | 6 TPI | ||
| Number of Spindle Speed | 6 Range | 6 Range | ||
| Diameter of Hole Through Spindle | 2 1/16" | 52 | 2 1/16" | 52 |
| Inch Range Threads | 4 to 60 TPI | 4 to 60 TPI | ||
| Metric Range Threads | 0.5 to 7.5 mm | 0.5 to 7.5 mm | ||
| Lead Srew Dia. & Pitch | 1.1/4" | 31.75 | 1.1/4" | 31.75 |
| Feed Shaft Dia. | 7/8" | 22.22 | 7/8" | 22.22 |
| Tail Stock Spindle Dia. | 1.3/4 | 44.45 | 1.3/4 | 44.45 |
| Tail Stock Spindle Taper Bore | MT-4 | MT-4 | ||
| Tail Stock Spindle Travel | 5.1/2 | 140 | 5.1/2 | 140 |
| Power Required | 2 H.P. 1440 RPM | 2 H.P. 1440 RPM | ||
| Approx Weight | 600 Kgs. | 800 Kgs. | ||
| STANDARD ACCESSORIES | EXTRA ACCESSORIES |
| Spindle Sleeve | Steady & Follow Rest |
| Dead Centre No. 2 | Face Plate |
| Square Tools Post | True & Dog Chuck |
| Thread Dial | Motor & Ele. Fitting |
| Switch Stand | Quick Change Tool Post |
| Change Gear Set | Coolant Pump |
| Motor Rails & V Pulley | Rear Tool Post |
| Taper Turning Attachment | |
| Any Other Special Requirment |
| SPECIFICATION | ||||
|---|---|---|---|---|
| Model | 10" | 12" | 15" | |
| Bed Width | : | 325 mm | 325 mm | 375 mm |
| Height of Center Over Flat Bed Ways | : | 254 mm | 304 mm | 375 mm |
| Maximum Swing over bed | : | 490 mm | 590 mm | 730 mm |
| Maximum Swing over Cross Slide | : | 290 mm | 390 mm | 530 mm |
| Maximum Swing in Gap | : | 800 mm | 900 mm | 1060 mm |
| Spindle Nose | : | 6 TPI | 6 TPI | 6 TPI |
| Number of Spindle Speed No. 8 Range | : | 30 to 500 RPM | 30 to 500 RPM | 30 to 500 RPM |
| Diameter of Hole Through Spindle option in bore size availaible. |
: | 54 mm | 54 mm | 54 mm |
| Inch Range | : | 2 to 24 T.P.I. | 2 to 24 T.P.I. | 2 to 24 T.P.I. |
| Metric Range | : | 1 to 6 mm | 1 to 6 mm | 1 to 6 mm |
| Lead Srew Dia. & Pitch | : | 38 mm 4 T.P.I. | 38 mm 4 T.P.I. | 38 mm 4 T.P.I. |
| Tail Stock Spindle Dia. | : | 50.8mm (2") | 57mm (2 1/4") | 57mm (2 1/4") |
| Tail Stock Spindle Taper Bore | : | MT-4 | MT-4 | MT-4 |
| Tail Stock Spindle Travel | : | 160 mm | 160 mm | 170 mm |
| Power Required | : | 2.2 kw / 3 H.P. | 2.2 kw / 3 H.P. | 2.2 kw / 5 H.P. |
| STANDARD ACCESSORIES |
| 2 H.P. Two speed Ele. Motor. |
| Penal Board with Relay, Contector, Push Button, S/F Switch, R/F Switch. |
| Coolant Pump with Flexible Pipe. |
| Bar feed Attachment. |
| Vertical Slide. |
| One Nos. Stoper Holder. |
| One Nos Turning Holder. |
| One Nos. Blank Holder. |
| One Nos. Drill Holder. |
| One Nos. Collet. |
| Spanner for Spindle Nut. |
| Turret Stoper Bolt Key. |
| Machine Model No. | GI-32 | GI-38 |
|---|---|---|
| Width of Bed | 151mm | 151mm |
| Center of Height | 143mm | 143mm |
| Swing over bed | 286mm | 286mm |
| Swing over Cross Slide | ø 145mm | ø 145mm |
| Spindle Nose | 10TPI Threaded Nose | 10TPI Threaded Nose |
| Spindle Bore Dia. | 34mm | 40mm |
| Collet Capacity | 32mm | 38mm |
| Spindle Speeds No. (Forward Reverse) | 12 | 12 |
| Range of Speeds | 300-1400 rpm | 300-1400 rpm |
| Cross Slide Tools to use | 3/8 x 3/8 | 3/8 x 3/8 |
| Cross Slide Travel | 150mm | 150mm |
| Turrer Slide Travel | 125mm | 125mm |
| Bore of Turret Hex | 25.4mm | 25.4mm |
| Average Working Distance Between Spindle & Turret Carriage | 250mm | 250mm |
| Power required | 2 H.P. Two Speed | 2 H.P. Two Speed |
| Gross Weight Approx | 750 Kgs. | 775 Kgs. |
| Floor Space Requied without Bar Feed Device | 1050mmx450mm | 1050mmx450mm |
Bed :Bed & all Casting Parts are manufactured in our Foundry. The Bed is made from A graded Casting 2V & 2 Flat type. Hardened & Ground Bed ways.
Head Stock :Head Stock Body is of latest specially design induction hardened & Ground spindle of special alloy steel. All centrifugal running parts are well balanced.
Apron & Norton :A four walled closed type with oil bath apron & norton having a best quality gears. Sliding & Surfacing feeds can be engaged by tightening a star knobs & engaging lever at appropriate position.
Tail Stock :Hexagonal shapped body. Tail Stock spindle having external & internal grinding with MT-4 Internal Tapper is provided. It can be off set for tapper turning.
Rahul Surve (Ganesh Machine Tools)
Gondal Road, B/h. Bal Adalat, Rajkot-360 002. (Gujarat) INDIA
Share us via
View Contact Number 
