Company Information
Member Since 10 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
Bed :Â Bed & all Casting Parts are manufactured in our Foundry. The Bed is made from A graded Casting 2V & 2 Flat type. Hardened & Ground Bed ways.
Head Stock :Â Head Stock Body is of latest specially design induction hardened & Ground spindle of special alloy steel. All centrifugal running parts are well balanced.
Apron & Norton :Â A four walled closed type with oil bath apron & norton having a best quality gears. Sliding & Surfacing feeds can be engaged by tightening a star knobs & engaging lever at appropriate position.
Tail Stock :Â Hexagonal shapped body. Tail Stock spindle having external & internal grinding with MT-4 Internal Tapper is provided. It can be off set for tapper turning.
| SPECIFICATION | 4'1/2" (1370 mm) | 6' (1825 mm) | ||
|---|---|---|---|---|
| INCH | MM | INCH | MM | |
| Bed Width | 11" | 279 | 11" | 279 |
| Height of Center Over Flat Bed Ways | 9" | 226 | 9" | 226 |
| Maximum Swing over bed | 17" | 432 | 17" | 432 |
| Maximum Swing over Cross Slide | 11" | 280 | 11" | 280 |
| Maximum Swing in Gap | 26" | 660 | 26" | 660 |
| Admit Between Centre | 18" | 457 | 36" | 915 |
| Spindle Nose | 6 TPI | 6 TPI | ||
| Number of Spindle Speed | 6 Range | 6 Range | ||
| Diameter of Hole Through Spindle | 2 1/16" | 52 | 2 1/16" | 52 |
| Inch Range Threads | 4 to 60 TPI | 4 to 60 TPI | ||
| Metric Range Threads | 0.5 to 7.5 mm | 0.5 to 7.5 mm | ||
| Lead Srew Dia. & Pitch | 1.1/4" | 31.75 | 1.1/4" | 31.75 |
| Feed Shaft Dia. | 7/8" | 22.22 | 7/8" | 22.22 |
| Tail Stock Spindle Dia. | 1.3/4 | 44.45 | 1.3/4 | 44.45 |
| Tail Stock Spindle Taper Bore | MT-4 | MT-4 | ||
| Tail Stock Spindle Travel | 5.1/2 | 140 | 5.1/2 | 140 |
| Power Required | 2 H.P. 1440 RPM | 2 H.P. 1440 RPM | ||
| Approx Weight | 600 Kgs. | 800 Kgs. | ||
Connect with us
For Buyer 
For Seller 
Help 
Gondal, Rajkot, Gujarat 
Send Enquiry