Garg Scientific Instruments Mumbai, Maharashtra

We are the noted Manufacturer, Exporter & Supplier of especially designed Simple Distillation Unit . The unit contains a vessel mounted in a heating bath and fitted with a condenser to condense the fumes. Our Simple Distillation Unit is available in vessel size of 20ltr, 50 ltr, 100ltr, 200 ltr, and 300 ltr. It is suitable for operations under the atmospheric pressure and full vacuum. The receiver with drain valve can be added for receiving the condensate. Optional Items Available With It : Heating mantel instead of jacketed heating/cooling bath Flush bottom valve instead of drain valve Cylindrical vessel instead of spherical vessel

We make available our Glass Heat Exchanger in two categories, namely Coil type and Shell & Tube type. It can be used for variety of applications such as condensation, cooling, heating, boiling and suitable combinations of the above. Moreover, the selection of equipment depends upon the type of application, heat load, availability of heating/cooling media and various other factors. Moreover, our Glass Heat Exchanger is reasonably priced. Functioning : In all types of glass Heat Exchangers the heat transfer is through the wall of the glass tube. The heat transfer co-efficient can be of a moderate order because of low wall thickness. With 1.5 mm thick walled tubes, the wall heat transfer co-efficient is about 725 Kcals/hr m2 o C and we can obtain an overall heat transfer co-efficient for steam condensation with water-cooling as about 550 Kcals/hr m2 o C. The allowable pressure inside the tubes can be vacuum to 3 kg/cm2 while that on the domes as well as on the shell depends upon the size of the shell corresponding to the values mentioned in technical specifications. The Heat Exchangers can safely be used up to 150 o C with the limitations of thermal shock up to 120 o C and temperature gradient across the wall less than 50 o C. The shell side pressures on metallic shell & tube heat exchangers can be as high as 2.5 kg/cm. For higher pressure requirement up to 4 kg/cm2 , the PTFE tube sheets need redesigning and can be made on special request. Available Types : Coil Condensers Product Coolers Immersion Heaters Boilers   Coil Condensers, Information Composed completely of glass, coil heat exchangers are typically used as vapor condensers and liquid coolers. They are usually designed and installed as an integral part of a vertical column. To provide a reliable corrosion resistant internal seal, the coil battery is sealed to the jacket, creating a single unit. Boilers and immersion heaters are also available in this all-glass coil design. Other   Designs We also offer glass cascade coolers, bayonet and jacketed-type heat exchangers. For further information on these special application models, please contact us. Technical  Data Heat Transfer in Condensers The heat transferred in coil condensers con be considered generally as 55 Btu/hr-ft2- o F for any unit. This figure may vary from 10 to 72 Btu/hr-ft2- o F depending on the fluids involved and the operating conditions.

That is why we are a celebrated Manufacturer, Supplier and Exporter of Structures Fittings from Mumbai, Maharashtra. Mainly used for supporting glass structures, our Structures Fittings are highly popular for their precise designs and high dimensional stability. We are highly proficient in handling bulk orders of Structures Fittings for our clients from all over the world.

We are renowned for offering high quality Industrial Couplings for use in various industries. Though present in various models, sizes and shapes, clients have the option to customize their order of couplings according to their industrial requirement. That is why we are a prominent Manufacturer, Supplier and Exporter of Industrial Couplings from Mumbai, Maharashtra.

The company is the known Manufacturer, Exporter & Supplier of durable and high-performance Distillation Overhead Assembly . The design and features of our assembly can be built according to the requirements of the clients. Our distillation overhead assembly for GLR can be obtained at reasonable price from us. We make use of glass lined reactors instead of glass reactors, especially when the scale of operation is large and relatively high pressure steam is to be used as heating media. Sometimes, assemblies like simple distillation unit, fractional distillation unit and others are also installed above our glass lined reactors. The basic features of such assemblies remain the same but glass shell & tube heat exchanger is preferred due to large scale operation.

Our company is a distinguished Manufacturer, Supplier and Exporter of PTFE Labware from Mumbai, Maharashtra. Our Labware are highly demanded in various medical establishments, laboratories, etc. because of their high durability and long working life. Our PTFE Labware are appreciated in various countries and can be availed at reasonable costs.   Introduction : GARG SCIENTIFIC INSTRUMENTS Laboratory Ware And Accessories Are Designed For Use Under The Most Severe Laboratory Conditions. Superior Performance Results From The Out Standing Properties Of PTFE, FEP And PFA Fluoropolymer Resins And The Techniques Used In Their Fabrication GARG SCIENTIFIC INSTRUMENTS  Has Perfected The Means Of Fashioning Laboratory Ware From Fluoropolymer Resins Which Have An Unmatched Combination Of Chemical Inertness, Heat Resistance, Low Temperature Toughness And Non Adhesive Qualities. The Resulting GARG SCIENTIFIC INSTRUMENTS  Products Are Exceptionally Safe And Reliable For The Most Critical Laboratory Experiments. HEAT & COLD RESISTANTY PTFE AND PFA Can With Stand Continues Heat As High As 500 F (260° C) While FEP Can With Stand Continues  Heat Of 480 F (205°C) PTFE< FEP And PFA Can With Stand Intermittent Heat To 600 F (315°C) 550 F  (288°C) And 500 F (260°C) Respectively. Experience Has Shown That Exposure To These High Temperatures Does Not Affect The Utility Of GARG SCIENTIFIC INSTRUMENTS Laboratory Ware Products. Fluoropolymers Also Have Out Standing Low Temperature Toughness And Flexibility. It Restains Its Useful Properties Down Through The Cryogenic Range. In Addition To The Properties Inherent In Fluoropolymer Resins, GARG SCIENTIFIC INSTRUMENTS  Laboratory Ware Brings You These Special Advantages : Extra Smooth Surface Resulting From The Finest Moulding Equipment & Techniques Assure Easy Through Cleaning Easy To Handle Products Are Light In Weight Familiar In Shape Styled For Easy Handling.   Properties of Garg Scientific Instruments  scientific Instruments Ptfe Products Non - Stick : Very few solid substances will permanently adhere to a "Garg Scientific instruments Scientific instruments PTFE" coating. And while tacky materials may show some adhesion, almost all substances release easily. Non - Wetting : Since " Garg Scientific instruments  Scientific instruments PTFE" surfaces are both oleo phobic and hydrophobic, they are not readily wet. Clean-up is easier, more through and in many cases self-cleaning. Heat Resistance : There is no decomposition of "Garg Scientific Instruments Scientific instruments PTFE" finishes below 400o F; insignificant decomposition between 400 and 500 F which requires no special precautions. From 500 to 575 F, intermittent service is possible with adequate ventilation. Low Coefficient of Friction : The coefficient of friction of "Garg Scientific Instruments Scientific instruments PTFE" is generally in the range of 0.05 to 0.20, depending upon the load, sliding speed and particular “Garg Scientific Instruments Scientific instruments PTFE" finish used. Cryogenic Stability : Many "Garg Scientific instruments PTFE" will withstand severe temperatures extremes without loss of physical properties. "Garg Scientific Instruments  PTFE" may be considered for use at temperatures as low as -450 o F. Unique Electrical Properties : Over a wide range of frequencies, "Garg Scientific Instruments PTFE" has high dielectric strength, a low dissipation factor, and very high surface resistivity. By special techniques, it can be made conductive enough to be used as an anti-static coating. Chemical Resistance : "Garg Scientific Instruments PTFE" is normally unaffected by chemical environments. However, certain coatings are permeable or have a lower resistance to attack. The only chemicals known to affect all "Garg Scientific instruments PTFE" finishes are the alkali metals and highly reactive fluorinating.   Types of PTFE Labwares :  ptfe Beakers, Ptfe Lid, Ptfe Bottle Narrow Mouth with Screw Cap, Ptfe Vessel or Jars with Screw Cap, Ptfe Bottle Wide Mouth with Screw Cap, Ptfe Crucible, Ptfe Lid, Ptfe Magnetic Stirrer Bar, Ptfe Policeman (or Magnetic-retriver), Ptfe Stirrer Guides, Ptfe Stirrer Guides, Ptfe Stirrer Guides, Ptfe Stuffing Box with Stirrer Guide, Ptfe Mercury Seal, Ptfe Stirrer Plain with S.s. Rod, Ptfe Stirrer Rod Plain, Ptfe Thermometer Pocket, Ptfe Watch Glass, Ptfe Hexagonal Stoppers, Ptfe Homogenizers (tissue Grinder), Ptfe Plain Test Tube with Round and Flat Bottom, Ptfe Test Tube with Screw Cap Round, Ptfe Test Tube, Ptfe Plain Centrifuge Tube, Ptfe Centrifuge Tube, Ptfe Centrifuge Tube, Ptfe Test Tube or Centrifuge Rack, Ptfe Vials , Ptfe Vial Rack , Ptfe Evaporating Dishes, Ptfe Dishes Crystallizing, Ptfe Dishes Assay or Culture Petri, Ptfe Tray Drying (heavy Wall), Ptfe Gas Wash Bottle with Screw Cap, Ptfe Dropping Bottles, Ptfe Conical Flask Narrow Mouth, Ptfe Conical Flask Wide Mouth , Ptfe Conical Flask with Screw Cap, Ptfe Digestion Vessel , Ptfe Transfer Container, Ptfe Tube or Sleeve Thin Walls, Ptfe Tube or Sleeve Heavy  Walls, Ptfe Reduction Adaptor, Ptfe Expansion Adaptor, Ptfe Gas Inlet or Outlet Tube, Ptfe Solid Spherical Balls, Ptfe Raising Rings, Ptfe Scraper, Ptfe Relative Density, Ptfe Weighing Bottles, Ptfe Cap Liner, Ptfe Stop Cock, Ptfe Sleeve, Ptfe Volumetric Flask, Ptfe Iodine Determination Flask, Ptfe Bellow Adapter, Ptfe Redistributors for Columns, Ptfe Packing Support for Columns, Ptfe Funnel 60o , Ptfe Desicators, Ptfe Sight Glass Packing, Ptfe Valve Bellow, Ptfe Valve Bellow Cap Only (gft) , Ptfe Expansion Bellow, Ptfe Vaccum Expansion Bellow, Alluminium Bellow Flanges, Ptfe Garg Scientific Instruments  Type Crescent, Ptfe Garg Scientific Instruments  Expansion Envelope Gasket, Ptfe Stirring Assembly Bellow, Ptfe Sheets, Ptfe Stirrer Blade.