Our Products
Borosilicate glass pipeline components find universal application throughout the worlds chemical, pharmaceutical, food and drink and allied industries where the advantage of using glass as a basis for the construction of complete process systems have long been recognized:
The complete range of pipeline components is described on the following pages. Components with a standard flat buttress ends are available from DN 25 to DN450.
For standard flat buttress end connections from DN25 to DN300, it is possible to achieve a 3 deflection in the joint by using a flexible gasket. Details of these and all other couplings and gasket can be found in section Couplings.
The pipeline components described in this section of the catalogue comply, which means that 90 bends, tee pieces and equal crosses are interchangeable.
DN refers to the nominal bore. Unless otherwise stated all dimensions are given in mm.
For permissible operating conditions, please see section Technical Information.
Borosilicate glass pipeline components find universal application throughout the worlds chemical, pharmaceutical, food and drink and allied industries where the advantage of using glass as a basis for the construction of complete process systems have long been recognized:
The complete range of pipeline components is described on the following pages. Components with a standard flat buttress ends are available from DN 25 to DN450.
For standard flat buttress end connections from DN25 to DN300, it is possible to achieve a 3 deflection in the joint by using a flexible gasket. Details of these and all other couplings and gasket can be found in section Couplings.
The pipeline components described in this section of the catalogue comply, which means that 90 bends, tee pieces and equal crosses are interchangeable.
DN refers to the nominal bore. Unless otherwise stated all dimensions are given in mm.
For permissible operating conditions, please see section Technical Information.
wo types of inserts are used depending upon the type of buttress ends and the backing flange.
1. Type A : For tapered buttress ends, asbestos gasket arcs are used for fitting between the tapered end and the flange.
2. Type B : For collared buttress ends, Cast iron split rings with thin asbestos rope are used & as backing rings between collar and the flange.
CAT. REF. | DN | D | D1 | L |
|
GCNB 25 | 25 | 50 | 32 | 10 | |
GCNB 40 | 40 | 65 | 48 | 10 | |
GCNB 50 | 50 | 80 | 60 | 10 | |
GCNB 80 | 80 | 110 | 88 | 11 | |
GCNB 100 | 100 | 146 | 117 | 14 | |
GCNB 150 | 150 | 195 | 165 | 14 | |
GCNB 225 | 225 | 280 | 240 | 10 | |
GCNB 300 | 300 | 361 | 324 | 10 | |
GCNB 450 | 450 | 555 | 480 | 18 | |
GCNB 600 | 600 | 684 | 642 | 10 |
These flanges are used to couple a glass ends to glass ends or to a below.Backing flanges are made up of cast iron and are used with inserts.They can normally be supplied in various grades of stainless steel on special order.
Cat Ref | DN | D | D1 | D2 | C | N x d | L | L1 |
|
GCF 25 | 25 | 95 | 43 | 51 | 70 | 3 x 7 | 10 | 6 | |
GCF 40 | 40 | 110 | 58 | 66 | 86 | 3 x 9 | 10 | 6 | |
GCF 50 | 50 | 120 | 70 | 81 | 98 | 3 x 9 | 12 | 8 | |
GCF 80 | 80 | 155 | 101 | 112 | 133 | 6 x 9 | 12 | 9 | |
GCF 100 | 100 | 200 | 134 | 148 | 178 | 6 x 9 | 12 | 9 | |
GCF 150 | 150 | 275 | 186 | 196 | 254 | 6 x 9 | 15 | 9 | |
GCF 225 | 225 | 350 | 260 | 282 | 310 | 8 x 11 | 28 | 7 | |
GCF 300 | 300 | 425 | 342 | 363 | 395 | 12 x 11 | 34 | 7 | |
GCF 450 | 450 | 630 | 537 | 557 | 585 | 12 x 14 | 37 | 7 | |
GCF 600 | 600 | 755 | 643 | 690 | 710 | 12 x 14 | 50 | 5 |
glass components are connected with one another by flanged joints. All the glass nozzles have special ends known as buttress ends to fix up a backing flange behind the end and connect the two opposite flanges by bolting with each other.
coring usually gives tapered buttress ends (garg type) which are backed by a metal flange with matching tapered bore and with a soft asbestos insert in between to prevent excessive point stresses on the glass surface. These joints give excellent performance when the glass and metal tapers are perfectly matched with full concentricity and when the alignment is perfect. In case of sight imperfection, there is a chance of excessive stresses and breakage of glass neck. Secondly, because of the taper fit, the glass to flange joint is mechanically locked and it is difficult to change flanges.
we give another type of end which we call collared buttress end. This is similar to stub ends used in copper and stainless steel piping. The collar is backed by an asbestos rope, a metal split ring and a metal backing flange. This type of joint is very strong and has flexibility in case of slight misalignment. The overall dimensions of this type of end are kept same as those of tapered end. Hence it is easy top interchange these types of ends; and even fixing tapered end with collared end is possible.
the following table gives dimensions of both the types of buttress ends
Nomial Bore DN | 25 | 40 | 50 | 80 | 100 | 150 | 225 | 300 | 450 | 600 |
Outside Diameter D | 33 | 46 | 59 | 87 | 115 | 163 | 238 | 322 | 475 | 640 |
Inside Diameter D1 | 26.5 | 38.5 | 50 | 76 | 104 | 154 | 229 | 308 | 462 | 622 |
Collar Diameter D2 | 42.5 | 57.5 | 70 | 99.5 | 133 | 185 | 259 | 341 | 535 | 642 |
Glass components are connected with one another by flanged joints. All the glass nozzles have special ends known as buttress ends to fix up a backing flange behind the end and connect the two opposite flanges by bolting with each other.
Coring usually gives tapered buttress ends (GARG type) which are backed by a metal flange with matching tapered bore and with a soft asbestos insert in between to prevent excessive point stresses on the glass surface. These joints give excellent performance when the glass and metal tapers are perfectly matched with full concentricity and when the alignment is perfect. In case of sight imperfection, there is a chance of excessive stresses and breakage of glass neck. Secondly, because of the taper fit, the glass to flange joint is mechanically locked and it is difficult to change flanges.
We give another type of end which we call collared buttress end. This is similar to stub ends used in copper and stainless steel piping. The collar is backed by an asbestos rope, a metal split ring and a metal backing flange. This type of joint is very strong and has flexibility in case of slight misalignment. The overall dimensions of this type of end are kept same as those of tapered end. Hence it is easy top interchange these types of ends; and even fixing tapered end with collared end is possible.
The following table gives dimensions of both the types of buttress ends
The glass components are supported on tubular structures. They are made of G.I. or powder coated still pipes. Typical fitting are used to make a strong and rigid structure to support the glass assemblies. These fitting are made of cast iron and held in position by tightening all screws.
NB | PIPE O.D | D1 | D2 | d | S |
|
25 | 33.3 | 35 | 45 | 1/2" | 18 | |
32 | 42.0 | 45 | 55 | 1/2" | 23 | |
40 | 47.9 | 51 | 61 | 1/2" | 33 | |
50 | 59.7 | 63 | 73 | 1/2" | 33 |
BASE
|
COUPLER (OUTER AND INNER)
CAT. REF. | NB | NB | HH1 |
|
GCL 25 | 25 | 150 | 200 | |
GCL 32 | 32 | 150 | 200 | |
GCL 40 | 40 | 150 | 200 | |
GCL 50 | 50 | 150 | 200 |
ELBOW
CAT. REF. | NB | NB | HL |
|
GBN 25 | 25 | 50 | 55 | |
GBN 32 | 32 | 65 | 70 | |
GBN 40 | 40 | 70 | 80 | |
GBN 50 | 50 | 85 | 95 |
DOUBLE ELBOW
CAT. REF. | NB | NB | HL |
|
GDBN 25 | 25 | 50 | 55 | |
GDBN 32 | 32 | 65 | 70 | |
GDBN 40 | 40 | 70 | 80 | |
GDBN 50 | 50 | 85 | 95 |
TEE
CAT. REF. | NB | H | L |
|
GT 25 | 25 | 50 | 55 | |
GT 32 | 32 | 65 | 70 | |
GT 40 | 40 | 70 | 80 | |
GT 50 | 50 | 85 | 95 |
DOUBLE TEE
CAT. REF. | NB | H | L |
|
GT 25 | 25 | 50 | 55 | |
GT 32 | 32 | 65 | 70 | |
GT 40 | 40 | 70 | 80 | |
GT 50 | 50 | 85 | 95 |
CROSS
CAT. REF. | NB | H | L |
|
GX 25 | 25 | 50 | 45 | |
GX 32 | 32 | 65 | 55 | |
GX 40 | 40 | 65 | 70 | |
GX 50 | 50 | 65 | 85 |
EQUAL BRACKET
CAT. REF. | NB | H | L | L1 |
|
GEBT 25 | 25 | 50 | 65 | 50 | |
GEBT 32 | 32 | 52 | 75 | 60 | |
GEBT 40 | 40 | 62 | 85 | 60 | |
GEBT 50 | 50 | 72 | 95 | 60 |
UNEQUAL BRACKET
CAT. REF. | NB | NB1 | H | L | L1 |
|
GUBT 25/15 | 25 | 15 | 35 | 65 | 50 | |
GUBT 32/15 | 32 | 15 | 40 | 75 | 60 | |
GUBT 40/25 | 40 | 25 | 50 | 85 | 60 | |
GUBT 50/25 | 50 | 25 | 55 | 95 | 60 |
SUPPORT
CAT. REF. | NB | H | L | d |
|
GSPT 25 | 25 | 55 | 50 | 13 | |
GSPT 32 | 32 | 55 | 57 | 13 | |
GSPT 40 | 40 | 55 | 62 | 13 | |
GSPT 50 | 50 | 55 | 67 | 13 |
Normally any process industry requires measurement, monitoring and control of various process parameters such as temperatures, pressure, flow etc.
DIGITAL TEMPERATURE INDICATORS
These are resistance temperature detectors with PT100 sensor. The display is digital LED display with 31/2 digit output and resolution of 0.1 o C. There are available with total range 0-999.9 o C. Flame proof and none two point controllers are also available. One point and two point controllers are also available for annunciation or for on/off controls.
The glass components are supported on tubular structures. They are made of G.I. or powder coated still pipes. Typical fitting are used to make a strong and rigid structure to support the glass assemblies. These fitting are made of cast iron and held in position by tightening all screws.
The general dimensions of the structures and fittings are as follows : -
Manufacture of glass pumps is comparatively recent development. The pumps involve moving parts. Hence, more precision is required in the manufacture to minimize operational and maintenance problems. Out of development activities and experience of several years, we have developed the following types of pumps.
These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping Two tapered wedges are provided to ensure firm grip on rods having dia or 3/8 .
Item No. |
Particulars |
GSGI/PL/45101 |
Fisher Clamp Single |
GSGI/PL/45102 |
Fisher Clamp Double |
These four way connectors prove to be an excellent option for achieving leakproof joints in tubing connections.
Item No. |
Particulars |
GSGI/PL/46121 |
Cross Connector – 6mm |
GSGI/PL/46122 |
Cross Connector – 8mm |
GSGI/PL/46123 |
Cross Connector – 10mm |
These L shaped connectors also add to the range of different connectors committed to provide excellent leakproof tube arrangements.
Item No. |
Particulars |
GSGI/PL/46131 |
L Connector – 6mm |
GSGI/PL/46132 |
L Connector – 8mm |
GSGI/PL/46133 |
L Connector – 10mm |
Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.
Item No. |
Particulars |
GSGI/PL/47001 |
290 X 220 X 140 mm |
GSGI/PL/47002 |
430 X 270 X 150 mm |
GSGI/PL/47003 |
Water Bottle – 125 ml |
GSGI/PL/47004 |
Water Bottle – 250 ml |
Adding in line with the existing range, these Animal Cages are provided with a Stainless Steel grill at the bottom of the cage to provide a dean surface for the species to move on.
Item No. |
Particulars |
GSGI/PL/48001 |
290 X 220 X 140 mm |
GSGI/PL/48002 |
430 X 270 X 150 mm |
These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6 mm to 10 mm tubing. These Stop Cocks ate absolutely leakproof and are available in two different options i.e. 2 way & 3 way. |
Item No. |
Particulars |
GSGI/PL/55301 |
Stop Cock 2 Way |
GSGI/PL/55302 |
Stop Cock 3 Way |
GSGI Kipps Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. l-lS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug The base is provided with a residual outlet fitted with a cap for easy cleaning.
Item No. |
Particulars |
GSGI/PL/55501 |
250 ml |
GSGI/PL/55502 |
500 ml |
GSGI/PL/55503 |
1000 ml |
These long stem funnels have smooth waIls, 600 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
Item No. |
Particulars (mm) |
Inside |
Stem Length |
GSGI/PL/57101 |
50 |
50 |
39 |
GSGI/PL/57102 |
62 |
61 |
67 |
GSGI/PL/57103 |
75 |
74 |
69 |
GSGI/PL/57104 |
100 |
93 |
84 |
GSGI/PL/57107 |
150 |
148 |
55 |
Moulded in Polypropylene, these two piece funnels are lightweight, easy to clean & autoclavabic. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing The base of the top portion has a perforated filter plate.
Item No. |
Particulars |
GSGI/PL/57105 |
70 mm |
GSGI/PL/57106 |
110 mm |
Designed specifically for analytical chemistry, the body of the funnels is 6O. Moulded in P1, these funnels are provided with internal & external ribs to prevent air blockage.
Item No. |
Particulars (mm) |
Inside |
Stem Length |
GSGI/PL/57200 |
50 |
50 |
50 |
GSGI/PL/57201 |
62 |
62 |
67 |
GSGI/PL/57202 |
75 |
75 |
77 |
GSGI/PL/57203 |
100 |
100 |
95 |
MCT Boxes are moulded in polycarbonate and are therefore strong as veil as autoclavable. One size can hold 64 MCTs of 1.5 ml. & the other can hold 100 MCTs of 0.5 ml. These boxes are designed to work at temperatures ranging from -190C to +121C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
Item No. |
Particulars |
GSGI/PL/63213 |
Rack for 100 MCTs of 0.5 ml |
GSGI/PL/63214 |
Rack for 64 MCTs of 1.5 ml |
These Crystal Model Sets contain different coloured jacks (Red, Bladk& White) & connectors Qong & short) in a prescribed number to be joined together in an illustrated way to form structures llke Diamond, Graphite & Sodium Chloride.
Item No. |
Particulars |
GSGI/PL/58101 |
Diamond |
GSGI/PL/58102 |
Sodium Chloride |
GSGI/PL/58103 |
Graphite |
Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in three sizes i.e. 1, 2 & 5 slides.
Item No. |
Particulars (mm) |
GSGI/PL/62100 |
1 slide |
GSGI/PL/62102 |
2 slides |
GSGI/PL/62103 |
3 slides |
These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.
Item No. |
Particulars |
GSGI/PL/63701 |
30 ml |
GSGI/PL/63702 |
60 ml |
These Slide Boxes are durable, compact & provide utmost protection to 1 x3 slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the
Item No. |
Particulars (mm) |
GSGI/PL/62104 |
25 slides |
GSGI/PL/62105 |
50 slides |
GSGI/PL/62106 |
100 slides |
These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.
Item No. |
Particulars |
GSGI/PL/63801 |
30 ml |
GSGI/PL/63802 |
60 ml |
These polypropylene tubes provide excellent aption for MA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.
Item No. |
Particulars |
GSGI/PL/64016 |
16 x 100 mm Ext. Thread |
As the name suggests, these vials are commonly u ed for storage of biological material, human & animal cells at temperature as low as -190C. The Cap is provided with a built in seal ring making the vial leak proof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack. |
Item No. |
Particulars |
GSGI/PL/64101 |
1.0 ml |
GSGI/PL/64102 |
2.0 ml |
GSGI/PL/64103 |
5.0 ml |
These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.
Item No. |
Particulars |
GSGI/PL/65001 |
8 ml |
GSGI/PL/65002 |
20 ml |
Cryo vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190C. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leak proof. The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
Item No. |
Particulars |
GSGI/PL/66001 |
1.0 ml |
GSGI/PL/66002 |
1.8 ml |
GSGI/PL/66003 |
4.5 ml |
These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Item No. |
Particulars |
GSGI/PL/66101 |
Cyro Coders |
Polylab Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accommodate Cryo Vials of up to 4.5 nil, capacity and are designed to be used at temperatures ranging from -190C to
+121C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
Item No. |
Particulars |
GSGI/PL/66301 |
81 places for 1 ml or 1.8 ml Cryo Vials |
GSGI/PL/66302 |
81 places for 4.5 ml Cryo Vials |
GSGI/PL/66303 |
100 places for 1 ml or 1.8 ml Cryo Vials |
These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is dear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.
Item No. |
Particulars |
GSGI/PL/67001 |
For 96 Micro Tips of 2-200 |
GSGI/PL/67002 |
For 100 Micro Tips of 200-1000 |
This stand, as the name suggests, is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for SOml nestler cylinder & other for lOOmL nestler cylinder.
GSGI Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and noncorrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.
Item No. |
Particulars |
GSGI/PL/78101 |
140 x 120 x 110 mm |
GSGI/PL/78102 |
160 x 160 x 160 mm |
As the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatediy auto claved.
Item No. |
Particulars |
GSGI/PL/78103 |
400 x 400 x 100 mm |
Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.
Item No. |
Particulars |
GSGI/PL/77705 |
24 Tubes |
GSGI/PL/77705 A |
48 Tubes |
Moulded in Polypropylene, this autoclavable Reagent Reservoir is helpful for multi-channel pipettes to be used into microtiter plates.
Item No. |
Particulars |
GSGI/PL/79121 |
75 ml |
This Universal Reagent Reservoir is a graduated single reagent reservoir with maximum volume of 50m1, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5ml. reagent channels. Made of polypropylene these reagent reservoirs are repeatedly autoclavable and can he used with all multi-channel pipettes.
Item No. |
Particulars |
GSGI/PL/79121 |
75 ml |
This ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.
Item No. |
Particulars |
GSGI/PL/79201 |
Ice Bucket |
These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These Jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.
Item No. |
Particulars |
Least Count |
GSI/PL/81101 |
250 ml |
10 ml |
GSI/PL/81102 |
500 ml |
10 ml |
GSI/PL/81103 |
1000 ml |
10 ml |
GSI/PL/81104 |
2000 ml |
20 ml |
Adding to the existing range of GSI Jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non- drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.
Item No. |
Particulars |
GSI/PL/81121 |
500 ml |
GSI/PL/81122 |
1000 ml |
GSI/PL/81123 |
2000 ml |
GSI/PL/81124 |
3000 ml |
GSI/PL/81125 |
5000 ml |
One sight glass consists of a glass pipe section, one metal frame, one pair of teflon bush and washers.( Metal frame can be made of MS/SS 304/SS 316)
Glass pipe section is made from borosilicate glass which is highly heat resistant and has low thermal expansion and excellent chemical durability. This pipe section is flared at both ends to increase its compressive strength as well as to ensure of leak proof fitting in metal frame.
Metal frame is of mild steel, zinc plated or resin powder coated, as desired, to eliminate the risk of corrosion. Both flanges of frame are welded with stud so that the stresses and vibrations of line, where it is to be fitted, would not transfer to glass pipe section. Its chuck nut system keeps the glass pipe section in compression and make it easy to replace the same.
Teflon bushes are provided on both the sides of glass pipe section in a way that flowing liquid/chemical would not be in contact with any metallic part of the sight glass. Further teflon washers are provided to use as gasket on both sides at the time of fitting.
Sight glasses can be supplied with the flanges frilled as per customers requirements. However as it is found that most of our clients using sight glasses demand ASA 150 table flanges. We use to keep ASA 150 table glasses ready in stock.
SIZE | GLASS LENGTH | THK. OF FLANGE | TOTAL HEIGHT | NO. OF STUDS | STUD DIA |
1" | 152 | 14 | 174 | 4 | 16 |
1.5 " | 152 | 14 | 174 | 4 | 16 |
2" | 152 | 14 | 174 | 4 | 16 |
3" | 152 | 14 | 174 | 4 | 16 |
4" | 152 | 14 | 174 | 4 | 16 |
6" | 152 | 14 | 174 | 4 | 16 |
One sight glass consists of a glass pipe section, one metal frame, one pair of teflon bush and washers.( Metal frame can be made of MS/SS 304/SS 316)