We are offering garware luxury primer
white (water thinnable)
garware luxury primer water thinnable is formulated by using copolymer emulsion and ideal combination of pigments and extenders so as to ensure so as to deep penetration and sealing of porous surfaces. It is pigmented white to give reasonable opacity to the primer.
it is suitable for interior and exterior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent and increases the spreading capacity of the paint.
salient features:
• excellent adhesion to substrate
• very good intercoat adhesion
• seals dry porous surfaces
• good hardness
• ease of application.
typical application: garware luxury primer water thinnable can be applied on plastered surfaces, asbestos sheets, concrete, brickwork, etc. Prior to over painting with water – based paints.
surface preparation: all surfaces before painting must be dry and free from loose dust, oil, grease, etc. In case of previously painted surface, remove the old loosely adhering paint by scraping and rubbing with sand paper. Dust off. In case of newly prepared plaster surface, allow sufficient time for curing and drying prior to primer application.
application methods: brushing, spraying and rolling.
no. Of coats recommended: one coat is sufficient for normal substrates.
thinner: clean water
thinning: if necessary 15-20% of water can be used for thinning.
drying time: surface dry : 30 minutes.
At 27º ± 2ºc & rh 60 ± 5%: overcoating : after 6 hours.
covering capacity: 14 – 16 sq. Mtrs litre coat.
on smooth non – absorbent surface.
finish: smooth and matt.
colour : white. If required, it can be tinted by using garware hi- power universal stainers.
storage life: best for use within 12 months from the date of manufacture.
packs available: 20 ltrs., 10ltrs., 4 ltrs. & 1 ltr.

We are offering garware luxury primer
white (water thinnable)
garware luxury primer water thinnable is formulated by using copolymer emulsion and ideal combination of pigments and extenders so as to ensure so as to deep penetration and sealing of porous surfaces. It is pigmented white to give reasonable opacity to the primer.
it is suitable for interior and exterior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent and increases the spreading capacity of the paint.
salient features:
• excellent adhesion to substrate
• very good intercoat adhesion
• seals dry porous surfaces
• good hardness
• ease of application.
typical application: garware luxury primer water thinnable can be applied on plastered surfaces, asbestos sheets, concrete, brickwork, etc. Prior to over painting with water – based paints.
surface preparation: all surfaces before painting must be dry and free from loose dust, oil, grease, etc. In case of previously painted surface, remove the old loosely adhering paint by scraping and rubbing with sand paper. Dust off. In case of newly prepared plaster surface, allow sufficient time for curing and drying prior to primer application.
application methods: brushing, spraying and rolling.
no. Of coats recommended: one coat is sufficient for normal substrates.
thinner: clean water
thinning: if necessary 15-20% of water can be used for thinning.
drying time: surface dry : 30 minutes.
At 27º ± 2ºc & rh 60 ± 5%: overcoating : after 6 hours.
covering capacity: 14 – 16 sq. Mtrs litre coat.
on smooth non – absorbent surface.
finish: smooth and matt.
colour : white. If required, it can be tinted by using garware hi- power universal stainers.
storage life: best for use within 12 months from the date of manufacture.
packs available: 20 ltrs., 10ltrs., 4 ltrs. & 1 ltr.