Our Products
Gears & Gear drives (India) Pvt Lts Worm gear screw jacks ( classic and cubical), quick lifting bevel gear screw jacks, Bevel gear boxes can be used as either single drive units or multi lifting systems.
Multi lifting Equipment are generally driven by a single motor. This makes the system to lift Equal. When driven by two or more motors sophisticated electrical synchronization and control is required.
The Equipment is built using :-
Best layout can be derived by using one or more ideas provided in following pages.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
hardness test jack is an electric cylinder that offers heavy thrust loads required to position samples to check hardness of these sample materials. Hitork engineering has enhanced the actuators for higher loads in a compact electric cylinder configuration. They may be further customized per application with motors, hand cranks, limit switches and indicators.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
hardness test jack is an electric cylinder that offers heavy thrust loads required to position samples to check hardness of these sample materials. Hitork engineering has enhanced the actuators for higher loads in a compact electric cylinder configuration. They may be further customized per application with motors, hand cranks, limit switches and indicators.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Hardness test jack is an electric cylinder that offers heavy thrust loads required to position samples to check hardness of these sample materials. HiTork engineering has enhanced the actuators for higher loads in a compact electric cylinder configuration. They may be further customized per application with motors, hand cranks, limit switches and indicators.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
ecl series
we offer electric cylinders that are basically worm gear screw jacks. However the screw is fully enclosed by push rod which is guided in the protection tube. Varieties of applications are possible using a choice of accessories. These cylinders are available at most competitive prices.
accessories:
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
ECL Series
We offer electric cylinders that are basically worm gear screw jacks. However the screw is fully enclosed by push rod which is guided in the protection tube. Varieties of applications are possible using a choice of accessories. These cylinders are available at most competitive prices.
Accessories:
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
we are the leading and prominent manufacturer and supplier ofclassic worm gear screw jacks (design1-type-a).
.Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
MWJ & IMAseries-classic models
Worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
Classic: foot print to match with german actuator models.
WJ series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
hitorkclassic worm gear screw jacks
we are the leading and prominent manufacturer and supplier ofclassic worm gear screw jacks (design1-type-a).
.Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
we are the leading and prominent manufacturer and supplier ofclassic worm gear screw jacks (design1-type-a).
.Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
we are the leading and prominent manufacturer and supplier ofclassic worm gear screw jacks (design1-type-a).
.Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Hardness test jack is an electric cylinder that offers heavy thrust loads required to position samples to check hardness of these sample materials. HiTork engineering has enhanced the actuators for higher loads in a compact electric cylinder configuration. They may be further customized per application with motors, hand cranks, limit switches and indicators.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
Side mounted jacks are used
in steel cold Rolling mills.It is
specially designed and
developed for a customer as
per their requirements.
These jacks can be mounted
on a wall parallel to screw
shaft for vertical lifting and
lowering application mounted
jacks for steel rolling mill
manufacturers.Jacks can be
mounted horizontally for
pulling & pushing application.
Normally Jacks are either base
mounted on the Axis of shaft
or Trunnion mounted.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
MWJ & IMAseries-classic models
Worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
Classic: foot print to match with german actuator models.
WJ series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
high performance - worm gear screw jack
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
Product description: 11 models ECL 0. 5 to ECL 35Max thrust from 5kn to 350 kn two worm gear ratios, normal and slow push rod is guided in external protection tube suitable for manual operation and electric motor standard head with internal threads fixed at push rod end is suitable for attaching other types of attachments swivel base, swivel plate with trunnion fixed to the housing base materials of construction worm shaft case carburized steel, hardened and ground thread profile trapezoidal screw shaft CR-MO steel, hardened & tempered housing alloy aluminum for 5 and 10 kn, all higher sizes in sg iron worm wheel and traveling nut in aluminum bronze
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : MWJ & IMA series-classic models
Worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
Classic: foot print to match with german actuator models.
WJ series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Delivery Time : To be Mutually Discussed and Agreed
product description:
4 sizes with max lifting capacity 15, 25, 50 and 90 kntwo ratios 2:1and 3:1 in each sizemodular design for type 1 and 2 configurationlifting speeds up to 18 m/mininput rpm up to 3000self locking trapezoidal screwbevel gearbox with oil splash lubricationone input shaft & up to 3 output shafts for multi jack systems & connecting motor, read deviceshigh efficiency ratings & long service life
materials of constructionhousing made of closed grain cast iron grade 25screw made of cr-mo medium carbon steel hardened & tempered for high core strength.nut made of aluminum bronze to british standard grade ab2bevel gears case hardened.
Additional Information:
Packaging Details : wooden box packing
Delivery Time : To be Mutually Discussed and Agreed
Product description: 11 models ECL 0. 5 to ECL 35Max thrust from 5kn to 350 kn two worm gear ratios, normal and slow push rod is guided in external protection tube suitable for manual operation and electric motor standard head with internal threads fixed at push rod end is suitable for attaching other types of attachments swivel base, swivel plate with trunnion fixed to the housing base materials of construction worm shaft case carburized steel, hardened and ground thread profile trapezoidal screw shaft CR-MO steel, hardened & tempered housing alloy aluminum for 5 and 10 kn, all higher sizes in sg iron worm wheel and traveling nut in aluminum bronze
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
we offer bevel gear screw jacks, which are quick lifting screw jacks for lifting, lowering, traversing and swinging applications at higher speeds than worm gear screw jacks. We provide two models for bevel gear screw jacks:
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
mwj & imaseries-classic models
worm gear screw jacks are used for lifting, lowering, traversing and swinging applications. Wide varieties models and large range of lifting forces facilitate large end applications.
classic: foot print to match with german actuator models.
wj series : lifting capacity: 5, 10, 20, 25, 50, 100, 150, 200. 250. 300, 350, 500, 750, 1000, 1500, 2500 kn.
Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be Mutually Discussed and Agreed
hitorkclassic worm gear screw jacks
we are the leading and prominent manufacturer and supplier ofclassic worm gear screw jacks (design1-type-a).
.Additional Information:
Packaging Details : Wooden Box Packing
Delivery Time : To be discussed mutually