Other Products / Services #652354

Diamond Burnishing Tool is a non-cutting machining process to produce mirror-like surface finish with low surface roughness of Ra-0.05um to Ra-0.35um, consistently accurate size and increased hardness of the skin layer. It is a type of cold working process where it removes the surface undulations generated after machining on metal by compressing the peaks of a metal's surface into the valleys like "ironing".

 

It is used where a hole is required to be increased in size by few microns which cannot be achieved by machining process like boring and also improve its surface finish, cylindricity and surface hardness.

 

Following are types of applications for which we offer the tools :

• Taper hole
• Straight Shaft.
• Taper Shaft
• Corner radius.
• Spherical surface

 

For any other application, will be manufactured against order.

We are a distinguished name in the domain and are placed in Pune(India) from where we operate. Buy the best quality HSS Port Form Cutter at rock-bottom prices from us. We are a reckoned name in the town. We manufacture these cavity port cutter id various standards.

We make use of the finest grade raw material that reflects in the finished products. Also, we make sure that raw material is procured from the trusted places only. The drills are made of HSS M42 grade ( 8% Cobalt) for application on hard to machine steels. The flutes are ground to give better tool life. PVD coating can be provided on customer request. The size range of diameter is available from 5 mm up to 60 mm

These tools are used to make holes in sheets. 

They are available in Carbide tipped type from diameter 16 mm upto dia.200 mm. 

We make Circular form tools and Inner Form tools. Our tools are made of HSS M35 and M42 grade. Coating is done as per requirement.

We make profile catbide inserts of any form. Application area- grooving, threading, outer or inner profile.

We offer Gear tooth profile cutters in ground and unground type. The size range is from Module 0.5 upto Module 15

These tools are used to generate internal thread (taps) in any material. We offer these tools from size Ø8 mm up to 50 mm with different tolerance like 2G, 3G, etc. Our  taps are manufactured in various material like HSS- M2, M35. 

 

We offer :-

• Left hand tap.
• Right hand tap.
• Multi start thread tap – 2 start, 3 start, 4 start, 6 start.
• Fine pitch.
• Course pitch.
• Tandem tap- two different sizes with same pitch. 
• Trapazoidal tap.

Annular cutter or Trepanning cutter or Hole saw cutter or Core cutter are used to generate holes in any material. We offer these tools from size Ø20 mm up to 100 mm in different design like HSS, brazed carbide or indexable insert. Can be customized as per requirement.

 

Area of application :

• Cast Iron
• Mild steel sheet
• Stainless steel sheet
• Non ferrous material.

Back spot face cutter and back chamfer cutter cutter are used to generate spot face and chamfer which cannot be accessed from the front side. We offer these tools in various sizes in different material like HSS, brazed carbide or indexable insert. Can be used on drilling machine or milling machine or even VMCs.

 

Area of application : 

• Cast Iron.
• Alloy Steel
• Stainless steel
• Non ferrous

 

Can be customized as per requirement.

Special Carbide Inserts-These inserts are used for special application where standard ISO inserts are not available. These carbide inserts are manufactured in any profile as per customer requirements. The carbide inserts are suited as per holder design or can be supplied along with the holders. They are manufactured in any cutting grade-K10, K20, Microfine depending on the material to be cut, as well as wear grade depending on the type of application. Typical application is for generating complex profiles of form tool.

 

Following are the areas of application :

• Dual Grooving Insert.
• Parting Insert.
• Concave or Convex radius Insert.
• Spot face with chamfer & radius Insert.
• Cams profile insert.
• Wear Part insert

We offer complete deburring solutions. Our tools can be used for cross hole deburring, external diameter and internal diameter deburring of pipe, edge deburring, etc.

 

We can provide deburring tools for hole diameter from 2 mm onwards.  Our tools can be used on any drilling machine or cnc machine.

 

Area of application :

• Hydraulic valves
• Hydraulic fittings
• Hydraulic cylinders
• Engines
• Turned components
• Machined components

We offer various types of dovetail cutter in HSS, HSS M35, Brazed carbide, Indexable Insert design. These tools are used on CNC, conventional or special purpose machines of various capacities for machining of metal.

 

We offer these cutters in 30 degree, 45 degree, 60 degree or custom made.

These are customized cutting tools designed to generate specific profile on the component with a single tool. The required profile on the component is generated on the tool cutting edges. These tools are used on CNC, conventional or special purpose machines of various capacities for machining of metal.

 

These tools are particularly used where :

• A component is required to be machined in a single setting to maintain relative accuracy parameters.

 

We offer these cutters for Multi spindle Automats, Milling machines, drilling machines turning machines in various material like :

• HSS – M2, M35, M42 grade.
• Carbide tipped type (brazed).
• Solid carbide.

 

These tools are manufactured with form relieving type in hss and brazed carbide.

We offer Serration cutter to generate serration profile with different pitch and angle and class. Our tools are manufactured in various material like HSS- M2, M35, M42, ASP30, ASP52. We offer these cutter in shank type and bore type with ground or un ground profile. Diameter range is from 50 to 150 mm and with length 35 to 350 mm

We can deliver Gear Hob from 0.5 module and above. Pressure Angle of 14.5 degree, 20 degree, 30 degree

We offer Serration Hob cutter or Serration cutter in straight serration or helical serration. Our cutters are used to generate serrations on the jaws of lathe chuck and similar applications.

 

We offer :

• Serration metric pitch from 0.5 mm, 0.8 mm, 0.9 mm, 1 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm.
• Imperial pitch from 1/32”, 1/16”, 3/32”, 28 TPI, 20 TPI, 16 TPI, 15 TPI
• Serration angle 53 degree, 55 degree, 60 degree, 70 degree, 90 degree
• Diameter of cutter ranges from 50 mm up to 152 mm
• Length of the cutter ranges from 25 mm up to 300 mm

 

Our tools are manufactured in various material like HSS- M2, M35, M42, ASP2030, ASP52. Serration in ground profile can also be given upon customer requirement.

We offer disc type Spline cutter and Sprocket cutter to generate spline shaft and sprocket respectively. Our tools are manufactured in various material like HSS- M35, M42, ASP30, ASP52. These cutters are used by gear shaft and gear box manufacturers. We can also provide gauges for checking spline shaft.

 

We can manufacture cutters as per customer specification in ground and unground profiles.

We offer T slot cutter and woodruff cutter for machining of ID groove for circlip or recess and woodruff key slot. Our tools are made using HSS or carbide in different grades as per application.

 

Our cutters are perfectly designed using optimal geometry to attain high cutting parameters and tool life.

We offer TCT slitting saw cutter in diameter range from dia.40 mm up to dia.600 mm. These products are manufactured in various thickness. As the name suggests, these tools are used for machining of thin slots from- 0.2mm up to 6 mm.

 

The different tooth profiles and number of teeth are made to suit different machining conditions. Tooth profile that can be generated are :

• A
• AW
• B
• BW
• C

 

Slitting saw cutters with radius profile, V profile or any other profile can be provided on request.

We provide services in development and manufacturing of a machined component and assemblies. Our rich experiences in process planning activities and manufacturing since 1988, we provide complete turnkey solutions in manufacturing of a component using different types of cutting tools to achieve the desired component quality with minimum usage of operations to achieve productivity. 

We design and manufacture cutting tools in hss, brazed carbide, solid carbide and Indexable insert type cutting tools with a vision of providing complete cutting tools solutions to our customers. Thus, we give end to end MACHINING SOLUTIONS.

Our scope of dealing is right from HSS tools, carbide tipped tools, solid carbide tools and indexable insert tools like T-max facing cutters and cnc holders depending on the application. We assure quality products to our customers. We give tooling solutions in - design, manufacture and implement cost reduction techniques in machining process.  We carefully study the customers machining setup, component drawing and suggest the best possible tool according to the process demand. In the course of our business, we have successfully designed and manufactured several customized tools and achieved path breaking results in increasing productivity.

We also give services in Re-sharpening and Reconditioning of broken tools for our customers. By doing this, we give cost reduction and benefit thereby being a responsible strategic partner.

We try to follow all environmental norms by minimising the use of paper by recycling and reusing of paper.

AREAS OF EXPERTISE  –

1. Manufacturing  Cutting Tools of any type - 

• Design & manufacture Insert type CNC & VMC Tools.
• Design & manufacture special profile carbide insert ( form insert ).
• Design & manufacture Threading tools – Taps, Dies, Chasers.
• Design & manufacture Drilling tools – HSS and Carbide.
• Design & manufacture Turning tools – HSS and Carbide.
• Design & manufacture Milling Tools – HSS and Carbide.
• Design & manufacture Special Application tools.
• Design & manufacture Burnishing tools.
• Design & manufacture Gear Cutting Tools.

2. Manufacturing  Cutting Tools for application on any material like – Metal, Wood, Plastic, Paper, Rubber.

3. Manufacturing  Cutting Tools accessories required in Machine tools and Tool room like -Machine Adaptors for VTL

 

These tools are used to generate any required profile in a single cut. These cutters are used when dimensions to be achieved onprofileare critical and when it is necessary to avoid using of multiple cutters.

The form tools are available in hss and brazed carbide. The tools are manufactured as per customers requirements.

We offer Circular blade and circular knife from diameter 40 mm up to diameter 550 mm in HSS, D2 steel or HcHcr depending on the application. The customized design blade can be manufactured to suit the application and the component work material.

 

Area of application :

• Packaging Industries
• Plastic Industries
• Rubber Industries

We are offering Internal Keyway Tool. keyway is the most important operation in deciding the life of transmission equipments like, gear box, pulleys, sprockets, clutch wheel. our tool is used to cut blind and thru internal keyway from bore size 12 mm upto 110 mm on any machine setup in a single setting. advantages-1) reduce the handling of the component.2) increase productivity.3) no need of costly tools.4) high accuracy achieved because of machining in a single setting without moving the component.5) accurate keyway width and centrality w.r.t. the bore.6) economical than other keyway cutting tools.

We are renowned in the market as one of the most well known manufacturers and suppliers of fastener tools. Our organization manufactures high quality Fastener tools which comprise engine bolt set, spanners set, sockets and all type of nuts. These are available in various dimensions, sizes and finishes to suit the requirements of the clients. Our range of fastener tools is known for excellent features like corrosion resistance, smooth finish and durable finish standards. The range of tools available is from simple blanking up to finishing process. These tools are cold forming tools manufactured from High alloy steel or solid carbide depending upon the requirement of the customer.Known For :High durabilitySturdy buildCorrosion resistanceAbrasion resistanceLong lifeEfficient performanceApplications :Nut and bolts industryHouseholdsConstruction businessElectrical industryTypes :Wire Guide DiesBottom DiesCold Heading DiesForming PunchesCold Forming DiesTrimming DiesHex Forming PunchesButton Head PunchesTorx Punches

We are renowned in the market as one of the most well known manufacturers and suppliers of fastener tools. Our organization manufactures high quality Fastener tools which comprise engine bolt set, spanners set, sockets and all type of nuts. These are available in various dimensions, sizes and finishes to suit the requirements of the clients. Our range of fastener tools is known for excellent features like corrosion resistance, smooth finish and durable finish standards. The range of tools available is from simple blanking up to finishing process. These tools are cold forming tools manufactured from High alloy steel or solid carbide depending upon the requirement of the customer.Known For :High durabilitySturdy buildCorrosion resistanceAbrasion resistanceLong lifeEfficient performanceApplications :Nut and bolts industryHouseholdsConstruction businessElectrical industryTypes :Wire Guide DiesBottom DiesCold Heading DiesForming PunchesCold Forming DiesTrimming DiesHex Forming PunchesButton Head PunchesTorx Punches

We are renowned in the market as one of the most well known manufacturers and suppliers of fastener tools. Our organization manufactures high quality Fastener tools which comprise engine bolt set, spanners set, sockets and all type of nuts. These are available in various dimensions, sizes and finishes to suit the requirements of the clients. Our range of fastener tools is known for excellent features like corrosion resistance, smooth finish and durable finish standards. The range of tools available is from simple blanking up to finishing process. These tools are cold forming tools manufactured from High alloy steel or solid carbide depending upon the requirement of the customer.Known For :High durabilitySturdy buildCorrosion resistanceAbrasion resistanceLong lifeEfficient performanceApplications :Nut and bolts industryHouseholdsConstruction businessElectrical industryTypes :Wire Guide DiesBottom DiesCold Heading DiesForming PunchesCold Forming DiesTrimming DiesHex Forming PunchesButton Head PunchesTorx Punches

We are renowned in the market as one of the most well known manufacturers and suppliers of Fastener Tools. Our organization manufactures high quality Fastener tools which comprise engine bolt set, spanners set, sockets and all type of nuts. These are available in various dimensions, sizes and finishes to suit the requirements of the clients. Our range of fastener tools is known for excellent features like corrosion resistance, smooth finish and durable finish standards. The range of tools available is from simple blanking up to finishing process. These tools are cold forming tools manufactured from High alloy steel or solid carbide depending upon the requirement of the customer.Known For :High durabilitySturdy buildCorrosion resistanceAbrasion resistanceLong lifeEfficient performanceApplications :Nut and bolts industryHouseholdsConstruction businessElectrical industryTypes :Wire Guide DiesBottom DiesCold Heading DiesForming PunchesCold Forming DiesTrimming DiesHex Forming PunchesButton Head PunchesTorx Punches

We are proud to present premium quality Form Tools are manufactured to suit aluminum alloys, super alloys, alloy steels, cast irons and are in wide demand in the market due to easy to use design and durable structure. The Form Tools offered by us are praised by our clients for high accuracy and premium performance. Our Form Tools have been are made from different kinds of premium quality materials to suit different needs of our clients. Surface Coating like TiN, TiALN, TiCN can also be provided upon request. The easy availability and competitive prices of our Tools have placed us among the leading Form Tools manufacturers, designers and suppliers from Pune, Maharashtra.Widely Used For :CNC MachinesConventional MachinesSpecial Purpose MachinesMaterials of Construction :HSS grade M2HSS grade M35HSS grade M42.Carbide tipped type ( brazed)Solid carbide

We are proud to present premium quality form tools are manufactured to suit aluminum alloys, super alloys, alloy steels, cast irons and are in wide demand in the market due to easy to use design and durable structure. the form tools offered by us are praised by our clients for high accuracy and premium performance. our form tools have been are made from different kinds of premium quality materials to suit different needs of our clients. surface coating like tin, tialn, ticn can also be provided upon request. the easy availability and competitive prices of our tools have placed us among the leading form tools manufacturers, designers and suppliers from pune, maharashtra.widely used for :cnc machinesconventional machinesspecial purpose machinesmaterials of construction :hss grade m2hss grade m35hss grade m42.carbide tipped type ( brazed)solid carbide

Getcuttingtools is a well reckoned brand of Piercing Punch tools manufacturers and suppliers from Pune, Maharashtra, We manufacture and supply durable and strong Piercing Punch that are used on different kinds of Press Machines. The Piercing Punch offered by us is available in different capacitates to meet specific needs of press machines for making sheets, metal presses and automobile components. The Piercing Punch manufactured by us is equipped with premium diesets that retain required accuracy for prolonged time period.Standard Size Range : 1.2 mm upto 17.5 with 80 mm length Main Components :HSS ( High Speed Steel ) Standard/Special Piercing Punch.Die Button.Die Set.Ball Cage in Aluminum and BrassPillar/bushWidely Used For To Manufacture :Sheet Metal PressesAutomobile PartsFendersMud GuardsGasketsPress ToolsAdvantages :High wear resistanceIncreased tool life.Reduced maintenance costHigh speed operationSubstantial reduction intool down timeReduction in loss of production because ofhigh performance.

Getcuttingtools is a well reckoned brand of Piercing Punch tools manufacturers and suppliers from Pune, Maharashtra, We manufacture and supply durable and strong Piercing Punch that are used on different kinds of Press Machines. The Piercing Punch offered by us is available in different capacitates to meet specific needs of press machines for making sheets, metal presses and automobile components. The Piercing Punch manufactured by us is equipped with premium diesets that retain required accuracy for prolonged time period.Standard Size Range : 1.2 mm upto 17.5 with 80 mm length Main Components :HSS ( High Speed Steel ) Standard/Special Piercing Punch.Die Button.Die Set.Ball Cage in Aluminum and BrassPillar/bushWidely Used For To Manufacture :Sheet Metal PressesAutomobile PartsFendersMud GuardsGasketsPress ToolsAdvantages :High wear resistanceIncreased tool life.Reduced maintenance costHigh speed operationSubstantial reduction intool down timeReduction in loss of production because ofhigh performance.

We deal in threading die used for external threading. Our dies are manufactured in HSS M2, M35 grades. The threading specification are in metric or imperial. We also make threading dies in multi start pitches like - 2 start, 3 start, 4 start mainly used in medical and automobile applications. Folllowing are the types of dies we deal - Split Die, Nut Die, Segmental Die.

We make form milling cutter in HSS M35, M42 grades.The form or profile is customized as per customer requirements. We have manufacture form cutters up to 250 diameter.