Our Products
Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customers choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.
Description | Core Drilling Application KMC - 10 |
DTH Drilling Application KMC - 10 |
Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth | NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions | 4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions |
Hydraulic System: A)Prime Mover B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed C) Rotation Speed Torque Speed. Torque. |
Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m | Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------ |
Compressor Minimum Suggested |
---------------------------- | 540 CFM & 185 PSI |
Under Carriage | Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track | Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track |
Water Pump Capacity Suggested min Drive & Mounting |
50 LPM @ 35 Kgf/cm² | 36 LPM @ 28 Kgf/cm² Hydraulic |
Hoist: | 1 Ton @ 30 meters / minute | ----------------------- |
DESCRIPTION | MODELS | ||
DTHR 300 | DTHR450 | DTHR 600 | |
Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size | 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) | 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) | 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm) |
(Under Favourable Drilling Condition) | |||
Mast:Construction Centraliser opening R.H Travel | Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) | Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) | Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs) |
Rotary Head:Max. Speed Max. Torque | 0 to 120 rpm 434 Kgf | 0 to 120 rpm 475 Kgf | 0 to 120 rpm 519 Kgf |
Feed System:Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) | 11285 Kgf 5525 Kgf 40 m/min | 16085 Kgf 8480 Kgf 30 m/min | 21990 Kgf 11215 Kgf 24 m/min |
Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity | 220 bar 10 microns 750 ltrs | 240 bar 10 microns 800 ltrs | 210 bar 10 microns 800 ltrs |
Prime Mover:Input Drive | Driven by suitable Diesel engine | Driven by suitable Diesel engine | Driven by suitable Diesel engine |
Levelling Jacks:Cylinder Stroke | 4 No.s Ø 125mm X 610mm | 4 No.s Ø 125mm X 610mm | 4 No.s Ø 125mm X 610mm |
(System Consists of Reverse Flow Resricted Valves) | |||
Break Out Wrench:Actuation Type Cylinder Stroke | Hydraulic 300 mm | Hydraulic 300 mm | Hydraulic 300 mm |
Mud Pump:Bore Stroke Max. Flow Max. Pressure Drive | 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic | 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic | 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic |
Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive | Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic | Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic | Manual operated Rod changer &Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic |