Hyderabad, Telangana, India
Our Products
Hammers are manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The products are heat - treated in the most modern, fully process controlled, in-house facility. The Carbide Buttons which are used are obtained from leading and reputed indigenous and foreign manufacturers.
GETECHHammer are quality products that conform to international standards and strict quality control methods.
GETECHproducts are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure,
A company you can trust for reliable products. Single toggle type with rugged construction, to with - stand vibration and heavy shock loads. For more production, higher efficiency and greater economy.
| Main Frame |
Fabricated from best quality steel plates specially designed and fabricated with extra rigs to take heavy shocks loads. |
| Jaw Stock | Specially designed jaw stock with extra rib to with - stand heavy shock loads |
| Eccentric Shaft | High quality eccentric shaft with heavy duty self aligning bearing to give trouble free running |
| Jaw Plates | Wear resistance manganese steel, jaw plates gives a maximum output |
| Side Plates | Made from manganese steels, one piece construction |
| Lubrications | Grease lubrication system guarantees safe operation |
| Draw Back Mechanism | Steel Draw Back rod with adjustable compression spring. |
| Toggle Plate | Cast in Special Cast Iron. Lubrication between Toggle Plate & Toggle Bearings by application of grease. If any iron or other materials enters in the crusher mouth, the toggle plate will break and machine is saved from damage |
| Fly Wheels |
One Flywheel is grooved for Vee Rope drive. Another is plain for flat belt. Both wheels are with counter weights. |
| Screen | Rotary Screen consists of punching 10 mm, 22mm, 28mm in four segments with bevel wheel,pinion and shaft |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 100 x 200 x 400 mm (16" x 8" x 4") - 8 Blocks / Stroke 150 x 200 x 400 mm (16" x 8" x 6") - 5 Blocks / Stroke 200 x 200 x 400 mm (16" x 8" x 8") - 4 Blocks / Stroke Hollow Mould and Solid Mould prices will vary. | |
| Single Vibrator | Double Vibrator | Triple Vibrator | |
| Power | 5 HP | 6.5 HP | 8 HP |
| Production Capacity | 2500 to 3500/8 hrs | 2500 to 3500/8 hrs | 2500 to 3500/8 hrs |
| Vibrator Motor | 1.5 HP, 440 V | 3 HP, 440 V | 4.5 HP, 440 V |
| Hydraulic Pump Motor | 3 HP, 440 V | 3 HP, 440 V | 3 HP, 440 V |
| Travel Motor | 0.5 HP, 440 V | 0.5 HP, 440 V | 0.5 HP, 440 V |
| Machine Weight | 900 kg | 950 kg | 1050 kg |
| Space Occupied by the Machine | 1750 x 1275 x1750 mm | 1750 x 1275 x 1750 mm | 1750 x 1275 x 1750 mm |
| No of Blocks per Shift (8 hrs) | 1300 to 1500 Blocks | 1500 to 1750 Blocks | 1750 to 2000 Blocks |
Water Level indicator (100m 1000m depth) with counter mechanism is a very handy device to quickly check the level of water in open wells and in borewells.
A sensor attached to the end of a cable, wound on a winch is lowered in to the well. over a calibrated wheel attached to the counter mechanism. The moment the sensor touches the water surface, a panel meter on the winch which is on the ground shows full deflection with buzzer sound. The depth to the water level from the ground can be read off in metric scale on the counter.
|
The main content of this filter consists of a highly compressed ceramic diatom. It is highly resistant to heat as tested by professionals. The Ceramic Filter removes all dirt, sand particles, bacteria, amoeba etc from the water. The diameter of Ceramic Filter is 0.2 micron whereas the diameter of bacteria is 0.5 to 1.0 micron. This filter ensures that your water is free from harmful diseases like cholera, typhoid, dysentery etc.
