Our Hydraulic Shearing Machine provides low-cost power shearing and high value. Our Hydraulic Shears are available in standard capacities for cutting 3 mm up to 16 mm metal plate. Variable Rake Angle Shears provide versatility along with the technology and construction for shearing thin small strips or the precision processing of large plates. The upper beam that carries the upper blade is guided by adjustable preloaded and hardened guide roller ways, a system normally found in much more expensive machines. The rake angle is adjusted hydraulically and the blade clearance is adjusted manually, reducing maintenance and providing overload protection. Variable rake angle can be especially beneficial in the shearing of narrow strips. Attributes

• Robust structure
• Compact design
• Smooth operation
• Higher efficiency
• Easy maintenance

• Main drive motor
• Electric control Panel
• Operation console
• Pre-selector switch to adjust rake angle
• Leaver operated blade clearance with calibration
• Fine stroke adjustment rod with limit switch
• Front Sheet support
• Squaring Arm on right end with steel rule
• Hardened Transfer bar mounted on table
• Hold down cylinders
• Shadow light indicator
• Four edge HCHCR/HCSR blade interchangeable & suitable to shear Mild & St. steel
• Manual Back gauge.

• Motorized back gauge with DRO
• NC back gauge with ball ScrewSecond squaring arm on left side
• Front support with roller according to required length
• Rear Sheet support
• Ball transfer table
• Degree protector for angular cutting
• Stroke counter
• Design with throat depth
• First fill of hydraulic oil

Our Hydraulic Shearing Machine provides low-cost power shearing and high value. Our Hydraulic Shears are available in standard capacities for cutting 3 mm up to 16 mm metal plate. Variable Rake Angle Shears provide versatility along with the technology and construction for shearing thin small strips or the precision processing of large plates. The upper beam that carries the upper blade is guided by adjustable preloaded and hardened guide roller ways, a system normally found in much more expensive machines. The rake angle is adjusted hydraulically and the blade clearance is adjusted manually, reducing maintenance and providing overload protection. Variable rake angle can be especially beneficial in the shearing of narrow strips. Attributes

• Robust structure
• Compact design
• Smooth operation
• Higher efficiency
• Easy maintenance

• Main drive motor
• Electric control Panel
• Operation console
• Pre-selector switch to adjust rake angle
• Leaver operated blade clearance with calibration
• Fine stroke adjustment rod with limit switch
• Front Sheet support
• Squaring Arm on right end with steel rule
• Hardened Transfer bar mounted on table
• Hold down cylinders
• Shadow light indicator
• Four edge HCHCR/HCSR blade interchangeable & suitable to shear Mild & St. steel
• Manual Back gauge.

• Motorized back gauge with DRO
• NC back gauge with ball ScrewSecond squaring arm on left side
• Front support with roller according to required length
• Rear Sheet support
• Ball transfer table
• Degree protector for angular cutting
• Stroke counter
• Design with throat depth
• First fill of hydraulic oil