Write a Review
Our Products
We offer a complete product range of Bed Side Cardiac Monitor and Multi Parameter Patient Monitor
TECHNICAL SPECIFICATIONS
| GENERAL | Display | STN Blue LCD with CCFL back light |
| Display area | 120mm x 90mm | |
| Resolution | 320 x 240 pixels | |
| Writing speed | 25mm/sec | |
| Alarms | Visual (Bell) and Audio (Buzzer beep) | |
| Freeze | On demand or automatic on alarm Frozen display on channel 2 | |
| Key board | Flat touch membrane operation keys | |
| CNS back panel connector | 9 Pin D-sub connector 0.5VjmV at 10mmjmV gain | |
| Dimensions | 235 x 166 x 140mm | |
| Weight | 1.5 kgs | |
| POWER SUPPLY | AC - DC Adapter | 15V DC/1.5A |
| AC mains | 100 - 264 V AC | |
| Line indicator | Green LED | |
| Power consumption | < 18VA | |
| Battery | Rechargeable NiMH 9.6V 1400mAh | |
| Battery backup duration | 180 minutes (min) | |
| Battery low indicator | Red LED | |
| ECG display | 4 seconds real time ECG on channel 2 | |
| ECG | Leads | User selectable I, II, III |
| Lead indicator | Yellow LEDs | |
| Heart rate range | 30 - 250 BPM | |
| Heat rate accuracy | _+2BPM or 2% whichever is higher | |
| Low alarm limit range | 30 to 240 BPM | |
| High alarm limit range | 40 to 250 BPM | |
| Bandwidth | 0.5 Hz to 35 Hz | |
| User gain settings for 10mm display | lmV, 0.66mV, 0.5mV & 2mV display | |
| CMRR | > 90dB @ 50Hz | |
| Input impedance | > 205M ohms | |
| Leakage current | < 20uA | |
| Patient isolation | > 2000 V AC @ 50Hz for 1 minute | |
| Reset recovery | Automatic return of waveform within 0.5 seconds after defibrillation or electrical overload | |
| Defibrillator protected | Yes | |
| Patient safety | Class 1 CF | |
| ENVIRONMENTAL | Operating temperature | 10° to 40° C |
| Relative humidity | 10 to 90% non condensing | |
| STANDARD ACCESSORIES | ECG Patient cable | 1 no. |
| Disposable electrodes | 30 nos. | |
| AC - DC adapter (AD-004) | 1 no. | |
| Accessory bag | 1 no. | |
| User manual | 1 no. | |
| OPTIONAL ACCESSORY | Wall mountable stand | 1 no |
MULTI PARAMETER PATIENT MONITOR
In-hospital applications include emergency, pre-and post-operative care, ambulatory surgery, intermediate care/step down units, labor delivery and hospital-based special procedure areas.
Technical Specifications
| ECG | 2-Temperature· Skin & Intra-Cavity (Optional) |
| Input: 5 wires/3 wires ECG cable | Measurement range: 0~500C |
| lead selection: I,II,III, aVR, aVl, aVF, V | Accuracy: ± 0.10C |
| Gain (mm/mV): 1/4,1/2,1,2,4 & auto | Resolution: 0.10C |
| Frequency response: Diagnosis 0.05 - 100Hz | Response time: < 3 min. |
| Monitor 0.5 - 35 Hz | Channel: 2 Channel |
| Surgery 1.0 - 15 Hz | Respiration Rate (Optional) |
| Sweep speed (mm/sec) : 12.5,25,50 | Method: RA-LL Impedance |
| Heart rate range: 15-300 BPM | Measurement range: 0 - 120 RPM |
| Heart rate accuracy: ± 1 % or ± 1 BPM, which is greater | Accuracy: ± 2 RPM |
| ST segment deviation analysis: -2.0 ~ +2.0mV | Resolution: 1 RPM |
| ST accuracy: ±0.02mV | Apnea Alarm : 10 ~ 40 Sec. |
| Heart Rate Alarm: Yes | Electrical |
| Non-Invasive Blood Pressure (Oscillographic) | Input: 100~250 V AC, 50/60Hz |
| Measurement type: adult, pediatric, neonate Measurement range: Systolic 40~270mmHg | Consumption: < 110VA |
| Diastolic 10~215mmHg | Battery type: Li-ion |
| Mean 20~235mmHg | Battery Operation: ~ 3 hrs |
| Accuracy: ± 2% or ± 5mmHg, which is greater Resolution: 1 mmHg | Physical |
| Protection: over pressure | Weight: ~ 3.5 Kg |
| Pulse Oximetry | Size: 210mm x 235mm x 122mm |
| SpO2 measurement range: 0 - 100 % | |
| Resolution: 1% | |
| Pulse measurement range: 0- 254BPM | |
| Accuracy: ± 2 %. 70~100% | |
| Resolution: 1 BPM |
Mr. Girish (Aditya Surgical Works)
Vakola Bridge, Chatrapati Shivaji Maharaj Marg, Shivaji Nagar, Opp. Anjaneya Hotel, Gala No. 2, Santacruz (east), Mumbai Â, Maharashtra - 400055, India
Share us via
