
Company Information
Ask for more detail from the seller
Contact Supplier| GENERAL | Display | STN Blue LCD with CCFL back light |
| Display area | 120mm x 90mm | |
| Resolution | 320 x 240 pixels | |
| Writing speed | 25mm/sec | |
| Alarms | Visual (Bell) and Audio (Buzzer beep) | |
| Freeze | On demand or automatic on alarm Frozen display on channel 2 | |
| Key board | Flat touch membrane operation keys | |
| CNS back panel connector | 9 Pin D-sub connector 0.5VjmV at 10mmjmV gain | |
| Dimensions | 235 x 166 x 140mm | |
| Weight | 1.5 kgs | |
| POWER SUPPLY | AC - DC Adapter | 15V DC/1.5A |
| AC mains | 100 - 264 V AC | |
| Line indicator | Green LED | |
| Power consumption | < 18VA | |
| Battery | Rechargeable NiMH 9.6V 1400mAh | |
| Battery backup duration | 180 minutes (min) | |
| Battery low indicator | Red LED | |
| ECG display | 4 seconds real time ECG on channel 2 | |
| ECG | Leads | User selectable I, II, III |
| Lead indicator | Yellow LEDs | |
| Heart rate range | 30 - 250 BPM | |
| Heat rate accuracy | _+2BPM or 2% whichever is higher | |
| Low alarm limit range | 30 to 240 BPM | |
| High alarm limit range | 40 to 250 BPM | |
| Bandwidth | 0.5 Hz to 35 Hz | |
| User gain settings for 10mm display | lmV, 0.66mV, 0.5mV & 2mV display | |
| CMRR | > 90dB @ 50Hz | |
| Input impedance | > 205M ohms | |
| Leakage current | < 20uA | |
| Patient isolation | > 2000 V AC @ 50Hz for 1 minute | |
| Reset recovery | Automatic return of waveform within 0.5 seconds after defibrillation or electrical overload | |
| Defibrillator protected | Yes | |
| Patient safety | Class 1 CF | |
| ENVIRONMENTAL | Operating temperature | 10° to 40° C |
| Relative humidity | 10 to 90% non condensing | |
| STANDARD ACCESSORIES | ECG Patient cable | 1 no. |
| Disposable electrodes | 30 nos. | |
| AC - DC adapter (AD-004) | 1 no. | |
| Accessory bag | 1 no. | |
| User manual | 1 no. | |
| OPTIONAL ACCESSORY | Wall mountable stand | 1 no |