Gmp-gc-05 tray drier oven:uses: for drying curing food grains, cereals, papads, seed daals , components, painted items, varnishedlacqueremery coated drying, plastic beads & granulespowder etcconstruction: industrial tray drier having cross-directional horizontal air-flow system by flange mounted motorized fan for rapid drying of material kept inside. Inner chamber made of ms and coated with heat resistive silver paint or ss-304 (20g).Temp.range: ambient to 250c. Control: unit is controlled by microprocessor based auto-tune pid controller with pt-100 sensor located at the top of oven. Safety thermostat in series with digital temperature controller given as a fail-safe. Control panel consist of pid digital temperature controller, 3 no. Status lamp of r, y, b phase, heater & motor status lamp, mains mcb & digital timer(if opted for) heater: heater is of ss, finned, hot+cold zone type , star connection mode for 3 and terminal taken out of oven from the sides with proper cover for easy accessibility. Air vent provided at the top of oven.Air circulation . By heavy duty flange mounted dual cross motorized multi fan blade of ms.Door: door with heavy duty die press lock, heavy duty hinges ensures air-tight closing of doors.power: 440 v, 3-, 4-wire system with proper earthing.

Construction: The unit is scientifically designed to provide excellent vacuum & temperature performance. The unit has a double walled construction. The inner chamber is made up of heavy gauge Stainless Steel, argon welded & mirror polished. The outer body is made up of MS; with powder coated finish in two tone colour (outer S.S. chamber can be provided on request). The main door of Aluminum casting is provided with a toughened glass at the center, for easy viewing of the contents of the inner chamber.Features:High reliability and low leakage rate.0 to 30 0 to -760 mm of Hg. Vacuum.Vacuum gauge and cock provided via SS T type coupling.High Low Temperature Selector Swith for precise control.Imported ( Capillary type Hydro-electric Thermal Fluid )Thermostat Control with Energy Regulator.Long lasting molded silicon gasket on door to provide perfect sealing of the inner chamber.Purging facility (as option)for Nitrogen gas through inletoutlet copper tubingVacuum pump excluded.Temp. Range: Ambient +5C to 200C.

The Electrode Drying Oven GMP-GC-06 is a unique design model which offers complete protection to welding electrodes by preventing deterioration caused by absorption of moisture (due to the electrodes being hygroscopic in nature). This oven with its thermostatic controlenergy regulatordigital control could be used as a dual purpose cabinet. If set at a lower temperature it could be used as an electrode storage cabinet, while at a higher temperature it could be used for the recovery of electrodes which might have become wet. The construction is double walled, insulated mild steel cabinet. The oven is duly powder coated and the inner chamber has a heat resistive silver paint with 2 thick high density glass wool insulation in between the walls.

the company is specialized in offering cleveland open cup flash & fire point tester. determination of the flash-and fire-point with open cup - cleveland method (automatic)as per is 1448(p-69):1969, astm d 92/66, ip 6/57 scopethis flash point and fire-point test method is a dynamic method and depends on definite rates of temperature increases to control the precision of the method. its primary use is for viscous materials having a flash point below79c (175f) except fuel oils, to define the hazards of flammable and combustible materials used in shipping and safety regulations. the temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. at specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.
the unit is equipped with

• standard cup : with handle, made of brass
• temperature probe pt-100 : for sample temperature fixed in the cup itself with connector jack.
• battery operated ( 1.5v pencil type cell ) gas igniter : for lpg gas ignition ( manually operated )
• flame detection unit : for the detection of flash- and fire-points.

heating : by electrical ss tubular cartridge heater of suitable rating to maintain ramp rate & easily replaceable. flame arrest cover : for extinguishing the fire in the cup by motorized activation signal. lpg flame movement : flame movement & lid open/close mechanism thru motor specification & featuresautomatic flash and fire point apparatus (by cleveland open cup method).

• temp. range : ambient to 400^oc with rtd sensor as thermocouple.
• flame-detector : by flame-detector sensor & flame controller.
• gear motors : flame movement, lid open/close action by program.
• controller : microprocessor based programe process controller cum indicator with 3-wire rtd temperature sensor, free potential flame detector sensor as i/p and dc v ssr as o/p.

We are the main supplier of this product.

Applications:GLOBAL Fully Automatic Vertical Autoclaves are ideal for all critical applications requiring assured and reliable total destruction of all living microorganisms.Ideal for Pharma QC QA Micro R & D, Chemical Plants, Bio-Labs, Waste treatment, Water & Air Pollution Labs, Fisheries, Mineral Water, Food, Beverage & Distillery Plants, Flight Kitchens, Hotels, Hospitals, Nursing Homes, Polyclinics, specialty Doctors and all applications requiring assured sterilizationConstruction: The unit has a double walled construction, complete with fully SS 304 construction (Argon Welded Chamber) & a Jacket of 18 SWG. The unit is fitted with an efficient radial locking system made of mild steel, Powder Coated , with paddle lifting device. The unit is supplied with stainless steel basket (Optional). The unit is fitted with safety and pressure release valves, water level indicator, cord & plug. The machine is fitted with a fully automatic microprocessor based temperature controller. The cycle is fully automatic including purging, sterilizing, rapid cooling & safety features such as process timer, low level water alarm, over heat Protection, two mechanical safety valves etc. The lid is made of SS.304, with Silicon rubber gasket used for sealing, supplied with pressure gauge & unique special round heater-to achieve pressure up to 20 Psi.

We are a notable Manufacturer, Exporter & Supplier of Laboratory Oven. The Laboratory Oven is manufactured using cutting edge technology and premium grade parts and components. The Laboratory Oven offered by is us is stringently quality tested by our strict quality controllers. The Laboratory Oven we supply is sturdy, durable, reliable, efficient and highly functional. Construction The Laboratory Oven has a triple walled construction. The inner chamber is made of SS & outer chamber is made of SS / MS with powder coated finish and glass wool insulation of 65 mm between walls. Control System : Microprocessor based temperature controller controls the heating process and digital timer with audio / visual alarm system is provided. A SS finned heater is used for heating process. A Motorized Forced Air Circulation by blower motor arrangement on top of oven for uniformity of temp of the inside chamber. The flush door is fitted with a virgin square silicon rubber gasket and is also fitted with special lock and handle. Temp range: Ambient to 250^oC with readability of ±0.1^oC.Uniformity of temp:2%of FSD Optional

• On demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost
• Our laboratory heating ovens is fully controlled, easy to handle, user friendly, intelligent and reliable

The Electrode Drying Oven GMP-GC-06 is a unique design model which offers complete protection to welding electrodes by preventing deterioration caused by absorption of moisture (due to the electrodes being hygroscopic in nature). This oven with its thermostatic control/energy regulator/digital control could be used as a dual purpose cabinet. If set at a lower temperature it could be used as an electrode storage cabinet, while at a higher temperature it could be used for the recovery of electrodes which might have become wet. The construction is double walled, insulated mild steel cabinet. The oven is duly powder coated and the inner chamber has a heat resistive silver paint with 2 thick high density glass wool insulation in between the walls. Temp.Range : 50^oC to 250^oC/350^oC with an accuracy of 5^oC in thermostatic control and 1^oC for digital control (PID Type). The machine comes in two models; one is cabinet type, while the other is portable type with either square or round model to choose from. Following types are also available For Cabinet Type

• Inner MS size : 24x18x18(HXWXD) with 14 SWG wire-mesh Crimped Tray(5no),
• Capacity : 50Kg
• Temperature : 50^oC -350^oC , (working temp up to 300^oC)

Optional :

• Digital Temp Controller Microprocessor PID Auto tuned with SSR & Heat Sink output for temp control can be supplied for Oven extra
• Forced Motorized Air Circulation by motor blower for Uniformity of temp inside Oven either from Bottom or Top extra

High Temperature Flux /electrode Drying Oven Model : Gmp Gc-06a Temp-range; 50^oC-400^oCThis model is triple-wall in construction, both outer (duly Powder coated) & inner (heat resistive silver paint) in CRCA/ MS body with high insulation of 100mm in between two walls , but with belt driven motorized MS Blower at its centre for uniform Air-circulation fitted at Top of Oven with asbestos/Teflon bonded square gasket at door with Press-fit lock arrangements & with Blind Temp Controller (ANALOG),

• Heater : Made up of SS304 Finned type with HOT+COLD zone & terminal taken out of Oven on back-side with safety cover,
• Rating : 4500W (Inner MS working)
• Size : 24X18X18 (HxWxD)

5no Shelves with 5no Rod Tray. Inner SS304 can be supplied at extra cost.

GMP-GC-74 Steam Bath Generator:Our steam units are fully automatic intelligent, user-friendly system. Simply switch on & after initial wait the correct bathing temperature is automatically reached. The unique feature includes: double walled 20 seg GI powder coated outer enclosure, & 16 swg thick stainless steel inner shell, argon welded with high density Glasswool insulation between two wall, and electrically operated solenoid valve at water inlet controlled by 2 stage (High Level & Low Level) solid state water level circuit. The unique pre-heat of cold water at inlet technology for uninterrupted steam supply .The safety devices includes mechanical pressure release valve of 15psi, Automatic cut off for heater at dry runinsufficient water inside bath (at 2nd Low-Level itself with Visual Lamp at Panel).Robust Heater is of SS304 good tested (leak-proof) quality with Brass terminal duly covered with housing) for long lasting durability & ease of replacement. The temperature of water is controlled by thermal hydraulic capillary type preset imported Thermostat.Control Panel is fixed with UNIT with MCB & all status lamp of level, heater etc. NOTE: The PRICES does not cover following as a scope of supply & if required will be charged EXTRA as option: (Please confirm the charges from the Co.)1. Installation at site 2. Plumbing-job required with UNIT.3. Insulation of outlet steam-pipe line from UNIT to the STEAM-ROOM.4. Input water supply pipe line with proper water pressure & NRV valve (for prevention of dust-particle, dirty water to fill the Generator tank when low water-level occurs.5. Mains power cord for power supply to UNIT (As the plug point location is uncertain) IMP: 1. Proper & secure EARTHING is a must for running the UNIT.2. Hard well water & contaminated should not be used , instead mineral water is highly recommended for smooth running of the UNIT.

Gmp-gc-15: laboratory hot-plate rectangularround:construction: the heating plates are rectangularround in shape and made up of ms cast iron(ci- casting) plates with groves for heating coil (ss plate can also be provided on request) .the top plates overhang by supporting ms pillar which allows air insulation between plate and control compartment to keep it cool. Long lasting nicrome heating wire with ceramic beads are used for the heating process. A choice of energy regulator digital temperature controllerthermostat is provided.max temp of surface: 300c of the plate.

Gmp-gc-57 glass-ware dryer with thermostat control & hot air blower-jetuse: the table-top glassware dryer is mainly used for rapid and convenient drying of laboratory glassware items of any shape or size by rinsing with water and inverted position mounting on different pegs. Process: a powerful electrically driven blower forces hot air through aluminum anodized pegs fitted on top surface of dryer. Special heating elements fitted with fins to increase the surface area of hot zone are provided at the intake of air. The unit is also provided with energy regulators with built in thermostat controls to control the heater. A separate hotcold air selector switch is provided at panel to blow the cold air (after heat process is over) or hot air.Power: 230 v, 50 hz, single phase supply.

Model gmp gc_1047 low melter alloy with pid auto-tuned microprocessor based dual digital temperature indicator cum controller with membrane key-pads:scope: the unique apparatus is basically designed & developed for cutting accurate shield blocks that expose only the desired areas of human body for chemotherapy treatment and thereby shield the unaffected part of the body from hazardous chemotherapy radiation.Unit is made of high density glass wool insulated double walled (to have outer skin temperature of body less than 40*c ) stainless steel, ss 304 grade 18swg duly argon welded matt finished buff with a capacity of 6 ltrs. The machine has solid state electronic microprocessor based pid auto tuned dual digital display temperature controller cum indicator with pt-100 as a thermocouple sensor and has membrane key pads for programming set temperature values which provides for an accuracy of 1c & resolution of 0.1c.digital read-out gives constant control over temperature monitoring. The machine also has special heating system on tap( ss ball valve type to regulate molten flow of alloy) to prevent clogging. low melter alloy melts solid mold of alloy of perfect percentage of tin lead bismuth mnmg etc in the form of small size ingotscubesbars etc. The mold should have more percentage of (a) tin (because of its low melting point), & (b) lead (because of its high density mass which works as a shield) compare to other material like mnmg etc. Power supply: 230v, 50 hz, single phase with earth connection secured

Our company is a credible Manufacturer, Exporter & Supplier of High Temperature Oven. The High Temperature Oven is manufactured by us using cutting-edge technology and high grade material. The High Temperature Oven is used for various industrial applications and is appreciated for its attributes like durability, efficient performance, high strength and reliability. Clients can avail premium quality High Temperature Oven from us at fair prices. Temperature Range : Ambient to 400^oC with an accuracy of 3^oC. Control SystemDigital temperature microprocessor based PID controller cum indicator with PT-100 sensor controls the heating process. Forced air circulation is effected by a flange mounted, belt driven motor for uniformity of inner chamber temperature. 4glasswool insulation is provided in between the walls to have skin temperature of the machine below 40^oC. An Enconal Finned Heater (Hot+Cold zone type junction) with leads taken out of the back of oven with cover for easy accessibility is used as the heating element. The door is fitted with asbestos/Teflon mix square gasket with hinges and special lock arrangement to provide perfect sealing of inner chamber (to avoid heat/power loss) Construction : The unit has a triple walled construction. The inner chamber is made up of CRCA thick mild steel. The outer body is made up of MS, with a powder coated finish. Optional

• On demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost
• Our technology is fully controlled, easy to handle, user friendly, intelligent and reliable

We are a prominent Manufacturer, Exporter & Supplier of Industrial Drum Heater. The Industrial Drum Heater is engineered to perfection by our team of proficient technicians. The Industrial Drum Heater is known for its robust construction, durability, efficient performance and long working life. We supply the Industrial Drum Heater in various parts of the world at the most reasonable prices. Power : 440 V, 50 Hz, 3- power supply. On demand half size drum heater could be made Construction : This industrial drum heater ( vertical model) has a well type, double walled construction. The Inner chamber is made of MS with a heat resistive silver paint finish and the outer chamber is also made of MS with a powder coat finish. The industrial drum heater has an electrical heating system, suitable for heating 200ltrs standard size drum. The drum heater is made into 2 semicircular halves, which are joined at one end by heavy duty hinges & clamps and at the other end by a special press fit adjustable lock, with the control panel on one half heater & heater connector junction box on the other half. A SS U type Enconel heater of suitable capacity is used as the heating element for uniform distribution of heat. The maximum achievable temperature is 250^oC. A digital microprocessor PID temperature controller cum indicator with PT-100 sensor controls the heating process. The unit is easily moveable on its costar wheels.

We are a reputed Manufacturer, Exporter & Supplier of Water Distillation Unit. The Water Distillation Unit is commonly used in biological labs, clinical research labs, R&D labs, hospitals, etc. to produce pyrogen free distilled water. The Water Distillation Unit is designed with complete precision. The Water Distillation Unit is known for its durability, efficient performance, high functionality and excellent strength. Construction And WorkingThe unit is wall-mounting with the full Body made up of stainless steel fitted with ISI certified safety ejection type immersion heaters. A constant water level arrangement is provided. A steam baffle is provided to take steam direct to thecold-water jacketed condenser. The stated output of the still is approximate as it is bound to vary according to the voltage of the MAINS. An electronic watch dog water level system with auto heater cut-off when water level is low along with buzzer can be provided at extra cost. Power Supply: 230 V, 50 Hz. Note: It is advisable to use DM water as i/p to the still, to ensure long duration of heater life Conductivity of o/p distilled water: 3 micro-mho. Optional : Electronic solid-state water-level watch-dog circuit with buzzer alarm and heater cut-off Price : Rs. 3, 000.00 extra

We are a renowned Manufacturer, Exporter & Supplier of Sauna Bath System. The electrically operated finned ss heater generates the heat which reached the temperature of 70-80degree c. For uniform air circulation, the air blower fan explodes the heat from the unit. The unit generator is a mild steel powder coated enclosure and is made of stainless steel sheet, argon welded at the inner side. The digital temperature controller cum indicator controls the sauna bath room temperature. The Sauna Bath System comes with auto shut-off option at pre settable room temperature and also customers can adjust the room temperature as per their choice.

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price. Construction & Working

• A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirring
• To further enhance the input, the unit accommodates up to a maximum of six individual capillaries
• The HVB features a measuring range of 5^oC to 230^oC and can be used with mineral oil, silicone oil, or water as the bath media.
• Bath temperature is displayed on a bright, easy-to-read digital display.
• The unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media

Features

• Measures kinematic viscosity of petroleum products at temperatures from 20^oC to 150^oC, according to ASTM D 445; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978
• Accommodates up to six capillary tubes; optional Cannon-Fenske or canon- menin tube holders available
• Digital bath temperature measurement and display
• Controls bath temperature with 0.01^oC stability
• Integral over-temperature and low bath level protection
• Large capacity bath with built-in stirrer, optional illumination

Optional

• Vacuum Gauge attachment accessories
• U tube clamp made up of acrylic polycarbonate material
• On demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliable
• Glass U calibrated tube of any type

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price.

We are the main supplier of this product.

We are the main supplier of this product.

Gmp-gc-16 muffle furnace of up to 1200c:laboratory muffle furnace of max temp: 1200c. Working temp: 1150 c.muffle size size dxwxh rating kw s. Rate(rs.)1. 9x4x4 2.0 30, 350.002. 10x5x5 2.5 36, 500.003. 12x6x6 3.5 43, 000.00construction: the unit has an outer body made up of ms with epoxy powder coat finish & a door with a heat resistant handle. The unit has a double walled type construction with the muffles body at centre of the furnace & the control box at top with 1"solid spacer in between. A coil type heater of kanthalnichrothal wire wound on the muffle with cerewool blanket serves as the heating element. A brick insulation+ ceramicwool +high density mineral wool insulation of 4" is also given to have skin temp.of furnace less than 50c. The door is provided with heavy-duty hinges and latch-catch lock system to openclose the furnace.Control panel: it is located at the top of furnace and includes a auto tuned pid microprocessor based temperature controller cum indicator with cral thermocouples controls heating process.power:230v or 440v, 50 hz as per requirements. Control will be ssr output type. Safety fuse with mcb for power is also provided.

We are the main supplier of this product.

The company is one of the leading Manufacturers, Exporters & Suppliers of Bitumen Test Equipment. Our team of skilled engineers uses the most advanced technology and superior grade material and parts to construct the Bitumen Test Equipment. The Bitumen Test Equipment is made as per the set industrial norms. Clients from different corners of the world appreciate the Bitumen Test Equipment offered by us because of the durability, high performance and efficiency. Highlights

• Robust construction
• Durable
• Excellent performance
• Fairly priced

The company is a major Manufacturer, Exporter & Supplier of Laboratory Incubator. The Laboratory Incubator is engineered with complete precision by our technicians. The Laboratory Incubator conforms to the international quality standards. Clients from all around the world demand the Laboratory Incubator offered by us because of the rigid construction, dimensional accuracy, high strength and efficient performance. Construction : The lab incubator has double-walled construction, with the inner chamber made of stainless steel. The outer chamber is made up of MS and finished in powder coated epoxy paint with glass wool insulation and has a full view clear thick polycarbonate door & in addition with the main door to facilitate easy viewing of the contents of inner chamber. The outer door is fitted with magnetic gasket, lock & handle. Cooling : By Hermetically sealed Kirloskar compressor with CFC free 134G refrigerant gas. Built in Time-delay of 90 seconds with solid state electronic circuit is also coupled with unit for safety of compressor is provided. An Ameter will be fitted on panel to know the status of compressor Uniformity of temperature : Is achieved by centralized flange mounted motorized blower at back of rating 1/12 HP, 1400 rpm single phase & the uniformity is within +/- 5% of FSD. Temperature Range : 5^oC to 60^oC Accuracy +/- 0.5C. A Fluorescent tube light is provided in the inner chamber for illumination Control System : A microprocessor based temperature controller cum indicator controls the temperature and the delay time, for compressor protection at power interruptions

We are a prominent Manufacturer, Exporter & Supplier of Electrical Heating Oven. The Electrical Heating Oven supplied by us is rigidly constructed by our team of experts using cutting-edge technology and high quality material. The Electrical Heating Oven is demanded widely because of its high performance, efficient working and affordable price. Temperature Range : 5^oC above ambient to 250^oC Heating Process Controls : Controlled by imported capillary (Filled with thermal fluid) type thermostat with option high/low selection switch for heater ConstructionThe unit is Laboratory type, with a double walled construction. The Inner Chamber is made of Stainless Steel (SS-304) 22G. The outer chamber is made of GI / CRCA, with powder coated finish in two tone color (Stainless Steel Buffed finished outer chamber can also be provided on request). Glass wool insulation of 65mm is present in between the walls to avoid heat dissipation. The Control panel is located at the top of oven. The heater compartment is at the bottom. A Flush door fitting coupled with virgin silicon square rubber gasket of 15mm & special lock and handle arrangement for locking the door is provided for perfect sealing of chamber. The Tray is made of GI mesh, Crimped and of size x12G wire thickness with stainless steel Border. The spacing between the shelves is 4 Optional

• On demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliable
• A Motorized Forced Air Circulation by blower motor arrangement on back wall of oven for uniformity of temp of the inside chamber

We are offering state of the art BOD Incubator. Uses : Most versatile for Biochemical Oxygen Demand determinations & various experiments that requires LOW Temperature conditions like Microorganism Cultivation, Cell Culture process of animals & plants, good storage. Product Application Areas : Pathological Lab, Hospital Lab, Blood Bank & Research Lab, Water Pollution, Sewage, Agriculture & Food Testing Lab etc. Besides, BODs are also used for the study of Synthesizing Organism. Construction : The unit has double-walled construction, with the inner chamber made of SS304 stainless steel. The outer chamber is made up of MS/CRCA and finished in powder coated epoxy paint with PUF insulation of 65mm and has a full view clear thick polycarbonate Acylic door in addition with the main door to facilitate easy viewing of the contents of inner chamber. The outer door is fitted with magnetic gasket , lock & handle. Uniformity of Temperature : Is achieved by centralized flange mounted motorized blower at back of rating 1/12 HP, 1400 rpm single phase & the uniformity is within +/- 5% of FSD. Cooling : By Hermetically sealed Kirloskar compressor with CFC free 134G refrigerant gas. Built in Time-delay of 90 seconds with solid state electronic circuit is also coupled with UNIT for safety of compressor is provided. An AMETER will be fitted on panel to know the status of compressor. Control System : A microprocessor based Auto Tuned PID temperature controller cum indicator with RTD (PT-100) Thermocouple controls the Temperature and the delay time, for compressor protection at power interruptions. Temp. Range: 5^oC to 60^oC Accuracy +/- 0.5^oC. A Fluorescent tube light is provided in the inner chamber for illumination. Safety Features : Safety Thermostat preset at max. level is incorporated with Unit for Compressor safety & Chamber Heater for cut-off for overshooting of temperature.

The company is specialized in offering Cleveland Open Cup Flash & Fire Point Tester. Determination of the Flash-and Fire-Point with Open Cup - Cleveland Method (automatic)As Per IS 1448(P-69):1969, ASTM D 9266, IP 657 ScopeThis flash point and fire-point test method is a dynamic method and depends on definite rates of temperature increases to control the precision of the method. Its primary use is for viscous materials having a flash point below79C (175F) except fuel oils, to define the hazards of flammable and combustible materials used in shipping and safety regulations. The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. The flash point is the lowest liquid temperature at which application of the flame causes the vapors of the test specimen of the sample to ignite. To determine the fire-point, the test is continued until the application of the test flame causes the test specimen to ignite and sustain burning for a minimum of 5s. It is an automatic flash and fire-point tester used to examine liquid as well as highly viscous samples in the same instrument without any additional equipment for temperature range up to 400^{oC. For substances with unknown flash points, the APPARATUS has a special search mode program. During the entire heating period, the test flame is moved across the sample at suitable intervals. The expected flash point of a specimen can thereby be found in a time saving and economical manner. Optional On demand : When examining highly viscous specimens, a preheating time and temperature are set, in order to warm-up and liquefy the sample & to insert temperature sensor probe without problem. The UNIT is equipped with}

• Standard Cup : with handle, made of brass
• Temperature Probe Pt-100 : for sample temperature fixed in the cup itself with connector jack.
• Battery operated ( 1.5V pencil type cell ) Gas Igniter : for LPG gas ignition ( Manually operated )
• Flame Detection Unit : for the detection of flash- and fire-points.

• Heating : By electrical SS Tubular Cartridge Heater of suitable rating to maintain ramp rate & easily replaceable. Flame Arrest Cover : for extinguishing the fire in the cup by motorized activation signal. LPG Flame movement : Flame movement & LID OpenClose mechanism thru Motor, PC Interface Programmed Controller : The Unit is incorporated with MODBUS RTU PC interface Microprocessor based PID Programmable controller user friendly features.( PC operated system through RS232 cable connection as option at extra cost ) Specification & FeaturesAutomatic Flash and Fire point apparatus (By Cleveland Open Cup Method).

  • Temp. Range : Ambient to 400^{oC with RTD sensor as Thermocouple.}
  • Flame-Detector : By flame-detector sensor & Flame Controller.
  • Gear motors : Flame movement, LID OpenClose action by program.
  • Controller : Microprocessor based Programe process controller cum indicator with 3-wire RTD temperature sensor, free potential flame detector sensor as ip and DC V SSR as op.
  • Equipment Overall Size (LxWxH) : Complete SS304 24x14x31Approx
  • Equipment Gross Weight : 21 Kg.

  • Supply : 230 V, 1-, 50 Hz supply with proper earthing system for Controller.