Gmp-gc-85 digital penetrometer: microprocessor based unit provides automatically timed operator programmable penetration measurementsconforms to all is, astm, ip, iso 9001 and related specificationspossible user groups are: adhesives, airports & aviation, asphalt, automotive, beverages, bitumen, chemicals, confectionery, constituent, cosmetics, fats, food, lubricant, mastics, motor vehicles, paraffin, penetration, pharmaceuticals, plastics, polishes, soap regulatory authorities, road research, rubber, tar, various, waxunit tests the consistency of lubricating greases, petroleum waxes, bitumens, pastes, creams and other solid to semi-solid products, including a variety of food products. Microprocessor control provides a full range of measurement and reporting options. The penetrometer defaults to the standard astm interval of 5 seconds or 60 seconds or as per choice. All selected parameters are retained in memory and automatically repeated in subsequent tests until changed by the operator.Penetration measurements in the full range of 0-400 or 0-600 in 110th of mm scale or 1100th of mm are reported directly in digits. If a test result falls outside of the programmed range, an audible signal and visual error message alert the user of a failed sample. It is incorporated with motorized placement of rack on the penetrated plunger carrying needle & locks the reading once it touches tip of the plunger-head with auto-positioning of rack at its home position for subsequent next measurement. It is also coupled with electrically operated plunger solenoid coil to activate release of plunger shaft as per set duration of time. For precise placement of tip of needle to the specimen sample surface, the unit is coupled with jack for updown movement.the height of the whole assembly (rack &pinion , plunger with electrical coil etc)can also be adjusted & fixed for test-run results can be communicated to a printer or computer via a built-in rs232 interface (as

We are a renowned Manufacturer, Exporter & Supplier of Digital Penetrometer. The Digital Penetrometer is manufactured by our team of skilled engineers as per IS: 1203-1978. The Digital Penetrometer offerd by us is widely demanded all across the world because of its strong construction, reliable performance, excellent efficiency and high functionality. Clients can avail the Digital Penetrometer from us at competitive price. Use : Used for the determination of penetration of asphaltic bitumen and fluxed native asphalt and blown type bitumen, Petroleum wax & jelly Construction

• Bath Unit consists of container of specified dimensions, needle, transfer dish, water bath Inner of SS outer powder coated finish with motorized stirrer to maintain desired temperature
• Cooling & heating arrangement controlled by a digital temperature controller cum indicator with PT100 sensor, electrically operated plunger, penetration indicator and timing device
• Digital penetrometer with digital timer coupled with Electrical plunger to measure the penetration in mm by digital penetration indicator in mm is also available in our stock

Gmp model -gc-59 louvandrometer as per is :764:1979the unique apparatus is used for determination of colour fastness of all textile materials irrespective of there composition & their form (yarn fibre etc.) to the action of soap & sodium carbonate solution at 60 degree c .the principle of this is that a specimen of textile in contact with the pieces of specified adjacent fabric is mechanically agitated in a soap soda solution rinsed & dried & the hang in colour of the specimen & the stirring adjacent fabrics are assessed with standard grey scales. The round shaped apparatus consist of a argon weld stainless steel water bath containing a rotor with which glass container flask of 500ml.capacity are rotated at a speed of 40 2 revmin &thermostatically controlled electrical heating device to heat the water bath so as to maintain the temperature of test solution in container at 60 2c.a mechanical timer of 30 minutes is fitted for time duration of test .a soap soda solution is to be poured in flask after the temp maintain to 60c the given specimen is dropped in glass flask & motor is rotated at a 40rpm fixed for 30mints.the results are to be obtained & tested as per specification. Digital temperature controller with timer can be given as option.

The company is a major Manufacturer, Exporter & Supplier of Manual Penetrometer. The Manual Penetrometer is widely used for measuring material by penetrating weighted needles or cones. The main application of Manual Penetrometer is for greases, waxes, food items, pharmaceuticals, bituminous materials, etc. We supply sturdy, durable and efficient Manual Penetrometer at affordable price. Construction And WorkingThe unit is ruggedly constructed for accurate, sensitive measurements. The aluminum base has a machined, grooved table with leveling screws and rubber inserts to protect tips of needles and cones and a spirit level. Two stainless steel rods act as support guides for a cast aluminum head with coarse/fine adjustments and a calibrated friction-free plunger mechanism. Indicator dial has instant zero reset. Any needle or cone with standard 1/8" (3mm) diameter stem may be mounted to the 47.5g plunger assembly. A standard 2.5g needle and two additional loading weights (50g, 100g) are included. Needles or cones for other tests can be provided separately as needed. Overall dimensions are 10.5x13x22^o (267x330x559), (W x D x H) approx. The Automatic model is the same as the manual unit, but has a button release mechanism with digital timer to automatically stop the plunger when the preset time from 0.1 to 9.9 sec. expires. Light Duty Penetrometer model has features like the manual model but is smaller and easy to disassemble. One needle and an additional loading weight (50g) are provided. Overall dimensions are 7x7x16^o (178x178x406mm), (W x D x H). The penetration needle for bituminous materials is smooth, hardened, tempered stainless steel with brass ferrule and weighs 2.5g to give 50g total when mounted. Stainless steel wax penetration needle is also 2.5g but has truncated cone-shaped tip with approx. 4mm maximum diameter tapered to 0.15mm diameter end. Several types of 102.5g grease cones as having polished 90^o cone with 30^o removable hardened steel tip are available. Transfer Dish is clear plastic, 3.75" diam. x 3.25^o deep (95x82mm), suitable for holding 3 oz. or 6 oz. sample boxes for transferring samples from bath to penetration testing. Penetration is read from a 5^o (127mm) diameter indicator dial of 0-400 divisions, each representing 0.1mm of penetration. Global offers heavy-duty units for manual and automatic use and a lighter, portable model for field work or for users with limited work load or limited budget. All meet ASTM and IS standards when fitted with proper needle or cone. Cones, Needles And Accessories : Used with Digital/Manual Pentrometer to determine the consistency of petroleum products. A wide range of penetrometer types are available for non-petroleum samples. Optional

• Hardened needle as per IS standard
• Weights of 50/100 gms, duly chrome plated and slotted for loading
• SS container (35 mm Ht. x 56 mm Dia.) for bituminous sample
• Aluminum solid cone as per IS standard
• Provision for Illumination with magnifying glass