Other Products / Services #4532887

Ideally suited for long term storage of various biological samples, Ultra Low Temperature Freezers combines the robust structure of traditional insulation with the electronic control board.1High temperature stability2.Low noise3.Easy moving4.User friendly & cute Italian design5.Available in several models (vertical and chest)6.MEDICAL DEVICE CERTIFIED (9342EEC)7.Increased storage volume reducing the footprint8.Bioguard Access control by user RFID cards (accessory)9.High performances10.Port hole11.Low noise12.Ergonomics & cute Italian design

Provides a wide range of laboratory refrigerators, freezers and combination of both for an ideal preservation of tissues, vaccines, medicines and reagents. Robust & Versatile:1.Wide range of capacities from 130 to 1500 liters2.Single (+4C(TN), -20C(BT) o -30C(LT)) or dual temperature (+4C -20C) models3.High stability and uniformity of the internal temperature4.Fast temperature recovery after door openng5.Forced air circulation6.Stainless steel internal chamber7.Safety key locks8.Tropicalized execution (up to 40C)9.Internal lighting10.Removable shelves or drawers11.Low energy consumption12.Drawers for Mother Milk (accessory)

Temperature, humidity and lighting control for stability tests of drugs and cosmetics High reliability and precision, low consumption and noise in compliance with users needs.1.High reliability and flexibility2.High precision in regulation and control by PLC and P.I.D.3.Maximum accuracy in testing.4.Low energy consumption.5.Low noise.

All ice makers are complete with the necessary fittings for the control in any operating phase. A security thermostat is installed on the equipment to control the ice production and to stop it automatically once the maximum level of the container has been reached. Available in the following version:1. Automatic ice cubers (CA models)2. Automatic ice flakers (FB models) Cooling system with hermetic compressor, air condensation (upon request with water condensation). The ice cuber evaporator is moulded in non toxic plastic and its cells are made of thinplated copper to guarantee maximum hygiene. The ice flaker evaporator is made of copper tube closed in a proper and insulated cylinder complete with auger, stainless steel ball bearings, graphite ceramic seal and nose for ice breaking. Brass spray ramp with brass tin plated nozzles to avoid magnetization of lime in the water, screwed together with a conic thread, they can be easily disassembled and cleaned. The ice makers are complete with special water pumps for water circulation, suitable for continous running made of graphite ceramic with stainless steel ball bearings.

It is available not only to compare the result but also to conduct both shaking culture and general culture synchronically because user can conduct the incubation in different conditions with the same incubator.

With their maximum working temperature of 260280300 C and forced air circulation, the ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilizing or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust. Ovens for high-forced volume thermal convection applications. These ovens generally provide uniform temperatures throughout. Process applications for laboratory ovens can be for annealing, die-bond curing, drying, Polyimide baking, sterilizing, and other industrial laboratory functions.

An autoclave is a device used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 C for around 1520 minutes depending on the size of the load and the contents. Autoclaves are widely used in microbiology, medicine, tattooing, body piercing, veterinary science, mycology, dentistry, and prosthetics fabrication. They vary in size and function depending on the media to be sterilized. Typical loads include laboratory glassware, other equipment and waste, surgical instruments and medical waste.Automatic working for heating, ventilation, pressure, sterilization, exhaust, end is suitable for laboratory.

All units incorporate Lateral Oscillation Technology for uniform cleaning results. The internal basket system allows the lid to seal the working solution avoiding evaporation and reducing ultrasonic acoustic levels. The clear and easy design with compact and quiet operation make these products the market leaders. Check out the Dual tank ultrasonic bench top cleaner to contain the cleaning process to one area reducing mess and increasing efficency in the cleaning process.

Vacuum Concentrator is a compact, fast and environmental friendly vacuum concentrator, ideal for the concentration of both large and small volumes from 200 x 1.5ml Eppendorf tubes to 4x 250ml tubes, with range of rotors to suit all your sample requirements. Vacuum Concentrator Systems combine multiple concentration components into one easy to order catalog number. Just add a vacuum pump and you will be ready to concentrate your samples! Aqueous, Acid-Resistant, Solvent, Proteomic and Mobile CentriVap Systems are available.

HyperVap an automated nitrogen blow down system, that achieves sample concentration by the injection of a controlled flow of inert gas into multiple sample tubes, whilst simultaneously controlling the sample(s) temperature. The entire concentration process can be programmed and controlled automatically with settings for the volume and flow rate of the gas, the temperature and the time for each cycle. ScanVac-HyperVap - Nitrogen blow-down Sample Concentrator.

It is designed for the measurement and analysis of precious samples by requiring only microvolume quantities. Dnamaster features the same ruggedness, reliability, precision and reproducibility synonymous with the halo family. The dnamaster is equipped with a comprehensive selection of on-board functions for versatility and suitability to many life science applications involving nucleic acid, proteins and bacterial cultures.The master's program is designed to meet the guidelines set out by the fbi national standards education requirements for dna technical leaders and supervisors

3 version of the Thermocycler compact. They ball have a colored touch screen and the graphical user interface that the Thermocycler is well known for. Temperature programs can be stored in directories that can optionally be protected by PASSWORDS up to 64 individual users. Programs can be copied between the Thermocycler compact and the bigger Thermocyclers Basic & gradient. There are temperature & time. Thermal cyclers may also be used in laboratories to facilitate other temperature-sensitive reactions, including but not limited to restriction enzyme digestion or rapid diagnostics.

Gel documentation system with its intuitive 32 Bit analysis software E.A.S.Y Win32 is synonym for high quality and user-friendly design. It is the outcome of MAKER's huge experience in laboratory workflow and meets the needs of all kinds of applications. Chemiluminescence, System is designed to meet the special needs of customers using chemiluminescence detection systems. The double-stage Peltier-Cooling and the outstanding performance of MAKER's high-resolution CCD camera minimize background noise and allow long-time integration of up to two hours. The special-sealed darkroom hood guarantees a light-tight interior.

GAS blowing system allows the experimenters to get the required materials from the mixed samples having different boiling points. Efficient evaporation is done by simultaneous or separate delivery of non-reactive pressurized gas to samples. Nitrogen gas provides better concentration without oxidation.GAS blowing system allows the experimenters to get the required materials from the mixed samples having different boiling points. Effcient evaporation is done by simultaneous or separate delivery of non-reactive pressurized gas to sample. Inert gas provides efficient concentration without oxidation.

Ir concentrator is high efficient concentration equipment to study micro-protein or molecular structure, extracted dna or rna. The required samples are extracted by concentrating dna or rna, amino acids, hormones, enzymes, protein in a short time by using vacuum pump and far infrared ray. Ir-emitting plate glass lid (patent no.10-0616063) with the use of infrared ray, the sample can be concentrated efficiently in a vacuumed chamber in a short time. The special ir glass lid protect liquid sample having high boiling point from condensation.

Balance, instrument for comparing the weights of two bodies, usually for scientific purposes, to determine the difference in mass (or weight). We provide Semi Micro Balances, Analytical Balances, Precision Balances, Standard Balances, Moisture Analyser, Moisture Analysis & Ash Determination, etc

The Model 96 microplate washer provides an automated and flexible process control strip washing for microplates.1. Flexible Process Platemaster 96 allows selection from manifolds of 8 or 12channels, 4 liquid channels, 3 washing methods includingnormal aspiration, overfl ow and bottom washing. Working on different assays is easy with the independent liquid channels without frequent bottle changes. The large LCD display with on board control allows up to 40 wash programme storage for easy operation. It is also compatible with fl at, U or V bottom 96-well microplates for different applications.2. Reliable Performance For great value, Platemaster 96 will be your best choice. It is equipped with a 3 speed shaking action to minimize bubbles generated and adherence of liquid to well sides. The waste water sensor for high waste level detection gives you additional reliability. A dispensing precision of better than 2% CV and residual volume < 2 l are proven with the advanced wash head design

Gas Chromatograph is a high performance multi-channel gas chromatograph designed for a broad range of analytical applications. It has the analytical capability and flexibility required for laboratories performing routine analyses as well as those involved in research and development.Gas chromatography (GC), is a common type of chromatography used in analytical chemistry for separating and analyzing compounds that can be vaporized without decomposition. Typical uses of GC include testing the purity of a particular substance, or separating the different components of a mixture (the relative amounts of such components can also be determined).

A range of cooling and cryostatic baths and circulators with intelligent, soft touch digital PID controllers. Seamless stainless steel baths of 8 or 18 litres with 50mm thick insulation. SHC 2000 or SHC4000 controllers with pump capacity of 17litresmin and circulation pressure of 350mbar. The models temperature range -35C to +150C and the -50C to +150C or -90C to +150C. The ideal equipment for pre-freezing samples for Freeze Drying, controlling temperature of externally connected instruments i.e. Rotary evaporators, electron microscope etc.

Thermo Block or Block Digester Using in sample preparation procedures account for approximately 85% of the time associated with lab analysis.Quality, ease of use and speed are key factors in today's analytical lab. Thermo blockBlock Digester provides clean, economical, efficient digestions. It is effective for the digestion and evaporation of samples, which simplifies and speedup your preparation. They are the most idea equipment for heating digestion in field of Chemistry, Environment, Food, Pharmacy & Biochemistry, etc. Thermo Block Block Digester, has been accepted and used in EPA Methods, which is good for the sample pretreatment for the analysis by AA, ICP, ICP-MS etc.

A fermentor or fermentation chamber is a type of bioreactor for containing and controlling fermenter microorganisms. Fermentation is an economical route to important raw materials (ethanol, lactic acid) and fermented foods. A fermentor must control temperature and keep the chamber anaerobic (free of oxygen) to optimize conditions for desired microbial fermentation. Fermentation is a basic and highly developed art, as well a pursuit of hobbyists. Necessary public information is available to create an economical and high performance OSE fermentor to complete certain product ecologies.

A muffle furnace (sometimes, retort furnace) in historical usage is a furnace in which the subject material is isolated from the fuel and all of the products of combustion including gases and flying ash.[1] After the development of high-temperature electric heating elements and widespread electrification in developed countries, new muffle furnaces quickly moved to electric designs. They are also used in many research facilities, for example by chemists in order to determine what proportion of a sample is non-combustible and non-volatile.

A rotary evaporator (or rotavap[1]rotovap) is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. When referenced in the chemistry research literature, description of the use of this technique and equipment may include the phrase "rotary evaporator", though use is often rather signaled by other language.Rotary evaporators are also used in molecular cooking for the preparation of distillates and extracts.

Microwave focus technique, which can help microwave energy to distribute equally in the cavity and increase the density of microwave around sample area. Samples can be prepared more quickly and thoroughly.

Flame photometer is a high accuracy and stability instrument. It reads simultaneously NaK in its double display, and Li or Ca in the K channel and it has a memory able to keep the last lecture.

Automatic Kjeldahl Analyzer is an automatic device integrating distillation and titration functions designed based on classic Kjeldahl nitrogen determination method. Its equipped with the latest core control system, powerful automation and high-quality components, can easily achieve automatic waste discharge and cleaning of digestion tubes and titration cups, control steam supply and real-time detection of condensation temperature.

Freeze Drying is basically a 3 stage process. In the first stage, the sample is frozen so that the "free" water present is converted to ice, thereby the phase change from liquid to solid is achieved. This stage is known as the PRE-FREEZING step. In the second stage of the freeze drying process, the ice formed in the pre-freezing step is removed from the sample by the direct conversation of the ice (solid phase) to a vapor (vapor phase), without passing through a liquid phase, by a process called sublimation. This stage is known as the PRIMARY DRYING step. A comprehensive range of large capacity floor standing research, process development and small scale production freeze dryers offering. Sophistication with Simplicity of operation with condenser temperatures to -95 C and pre freeze to -80 C for bulk or vial drying to 1.2 m. A complete range of basic bench top and large capacity research and laboratory freeze dryers offering Sophistication with Simplicity of operation with condenser temperatures to -110 C and a wide range of high quality chambers and accessories.