Our Products
Description | Unit | Value | ASTM Test |
Filler content | % | - | - |
Specific Gravity | - | - | D 792 |
Melt Flow Rate @ 230 oC, / 2.16 kg | g/10 min | - | D 1238 |
Molding Shrinkage 3.2 mmsection | Molding Shrinkage 3.2 mmsection | - | D 955 |
Impact Strength, Izod | - | - | - |
notched 1/8 in (3.2 mm) section | J/m | - | D 256 |
Tensile Strength | MPa | - | D 638 |
Tensile Elongation | % | - | D 638 |
Tensile Modulus | MPa | - | D 638 |
Flexural Strength | MPa | - | D 790 |
Flexural Modulus | MPa | - | D 790 |
Heat Deflection Temperature | - | - | - |
@ 264 psi (1820 kPa) | oC | - | D 648 |
@ 66 psi (455 kPa) | oC | - | D 648 |
Flammability"" | - | V0 | UL94 |
Injection Pressure | MPa | - | - |
Melt Temperature | hr @ oC | - | - |
Mold Temperature | oC | - | - |
Drying | hr @ | - | - |
Description | Unit | Value | ASTM Test |
Filler content | % | - | - |
Specific Gravity | - | - | D 792 |
Melt Flow Rate @ 230 oC, / 2.16 kg | g/10 min | - | D 1238 |
Molding Shrinkage 3.2 mmsection | Molding Shrinkage 3.2 mmsection | - | D 955 |
Impact Strength, Izod | - | - | - |
notched 1/8 in (3.2 mm) section | J/m | - | D 256 |
Tensile Strength | MPa | - | D 638 |
Tensile Elongation | % | - | D 638 |
Tensile Modulus | MPa | - | D 638 |
Flexural Strength | MPa | - | D 790 |
Flexural Modulus | MPa | - | D 790 |
Heat Deflection Temperature | - | - | - |
@ 264 psi (1820 kPa) | oC | - | D 648 |
@ 66 psi (455 kPa) | oC | - | D 648 |
Flammability"" | - | V0 | UL94 |
Injection Pressure | MPa | - | - |
Melt Temperature | hr @ oC | - | - |
Mold Temperature | oC | - | - |
Drying | hr @ | - | - |
Description | Unit | Value | ASTM Test |
Filler content | % | - | - |
Specific Gravity | - | - | D 792 |
Melt Flow Rate @ 230 oC, / 2.16 kg | g/10 min | - | D 1238 |
Molding Shrinkage 3.2 mmsection | % | - | D 955 |
Impact Strength, Izod | - | - | - |
notched 1/8 in (3.2 mm) section | J/m | - | D 256 |
Tensile Strength | MPa | - | D 638 |
Tensile Elongation | % | - | D 638 |
Tensile Modulus | MPa | - | D 638 |
Flexural Strength | MPa | - | D 790 |
Flexural Modulus | MPa | - | D 790 |
Heat Deflection Temperature | - | - | - |
@ 264 psi (1820 kPa) | oC | - | D 648 |
@ 66 psi (455 kPa) | oC | - | D 648 |
Flammability"" | - | V0 | UL94 |
Injection Pressure | MPa | - | - |
Melt Temperature | hr @ oC | - | - |
Mold Temperature | oC | - | - |
Drying | hr @ | - | - |
Description | Unit | Value | ASTM Test |
Filler content | % | - | - |
Specific Gravity | - | - | D 792 |
Melt Flow Rate @ 230 oC, / 2.16 kg | g/10 min | - | D 1238 |
Molding Shrinkage 3.2 mmsection | % | - | D 955 |
Impact Strength, Izod | - | - | - |
notched 1/8 in (3.2 mm) section | J/m | - | D 256 |
Tensile Strength | MPa | - | D 638 |
Tensile Elongation | % | - | D 638 |
Tensile Modulus | MPa | - | D 638 |
Flexural Strength | MPa | - | D 790 |
Flexural Modulus | MPa | - | D 790 |
Heat Deflection Temperature | - | - | - |
@ 264 psi (1820 kPa) | oC | - | D 648 |
@ 66 psi (455 kPa) | oC | - | D 648 |
Flammability"" | - | V0 | UL94 |
Injection Pressure | MPa | - | - |
Melt Temperature | hr @ oC | - | - |
Mold Temperature | oC | - | - |
Drying | hr @ | - | - |