Write a Review
Our Products
Our Complete range of products are TAP WRENCHES RETCHED, DRILL STAND ALUMINUM, SINGLE FLUTE COUNTERSINKS, SURFACE MARKING BLOCK and SURFACE MARKING BLOCK (ROUND).
| Accurately and quickly locates center on round work piece. | |
| For execution place the tool in drill chuck or collet and line up pointer with line scribed on shaft. |
| Basic tool for machinist and toolmakers for accurately scribing lines, transferring measurements and probing during inspection work. | |
| Polished and hardened Steel base with double ended scriber. | |
| Polished and hardened Steel base with double ended scriber. | |
| Front Recessed for depressing Spindle below base level. | |
| Has fine Adjustment for precise angular movement. | |
| Base has 2 retractable Pins to set against edge of a Surface plate. | |
| 1/4" (6.35 mm) hole drilled on adjustment knob for positioning a dial indicator. |
| Article No :- 171 |
| Cat. No. |
Base Dimension L / W / H |
Length of Spindle |
Diameter of Spindle |
|||
| INCH | MM | INCH | MM | INCH | MM | |
|
SMB-401 |
2-3/16 x 1-5/8 x ¾ |
55 x 40 x 20 |
4 & 7 |
100 & 175 |
1/4 |
6.35 |
|
SMB-402 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
9 & 12 |
225 & 300 |
3/8 |
9.5 |
|
SMB-403 |
4 x 3-1/2 x 1-1/8 |
100 x 90 x 30 |
12 & 18 |
300 & 450 |
3/8 |
9.5 |
|
SMB-404 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
9 |
225 |
3/8 |
9.5 |
|
SMB-405 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
12 |
300 |
3/8 |
9.5 |
| Sturdy construction surface gage | |
| Consists of Adjusting knob and hardened scriber. | |
| Round base made of close grain Cast Iron. | |
| Very useful for every workshop |
| Article No :- 172 |
| Cat. No. | Height | Base Diameter | ||
| INCH | MM | INCH | MM | |
| SMBR-406 | 12 | 300 | 3-1/8 | 80 |
| SMBR-407 | 20 | 500 | 3-1/8 | 80 |
| Magnetic Base elbow joint flexible arm with two magnetic phase. | |
| Includes ON/OFF Switch and Central locking knob to tighten both arms | |
| Dial Gage Holder includes fine adjustment. |
| With one magnetic phase light duty with standard clamp | |
| Compact and small Universal Permanent Magnetic Stand | |
| Includes Disc on bottom for free magnet when not in use |
| Designed for Machine use and light, portable work | |
| Ideal for Chamfering, Debarring and Counter Sinking | |
| Single Flute construction and low controlled relief provide chatter less operation and smooth surface finish | |
| Versatility of this tool should increase productivity on all general purpose applications | |
| Available in 60, 82 or 90 | |
| Made from High Speed Steel |
| TAP WRENCHES RETCHED -TYPE | ||
| Article No :- 372 | ||
| High quality Tap Wrenches for Hand Tapping, drilling and Reaming | ||
| Shiny ground finish | ||
| Jaws are hardened and Tempered | ||
| Knurled chuck sleeve | ||
| Jaws are replaceable and self Equalizing. | ||
| Available in Ratchet type. | ||
| High quality tool for Hand tapping operations | |
| Hardened and Tempered Jaws | |
| Smaller sizes available in die Cast or drop forged design | |
| Larger sizes above 1? available in steel casting. |
|
Article No :- 375 |
| Cat No. | Tap Capacity Inch | Overall Length | |
| Inch | Inch | mm | |
|
THA-1213 |
1/16 - 1/4 |
7 |
180 |
|
THA-1214 |
1/16 �3/8 |
9 |
235 |
|
THA-1215 |
5/32 �1/2 |
11 |
280 |
|
THA-1216 |
5/32 �/4 |
15 |
380 |
|
THA-1217 |
1/4 -1-1/8 |
19 |
480 |
|
THA-1218 |
3/4-1-1/2 |
40 |
1015 |
|
THA-1219 |
1�-1/2 |
54 |
1370 |
Sunny Luthra (Goldy Industries)
28/127,West Patel Nagar, Delhi - 11000, India
Share us via
