Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

GI

Goliya Instruments Pvt. Ltd.
location Sewri, Mumbai, Maharashtra

Write a Review
Call Now Call Now

Our Products

  1. Transducer 7 Products available
  2. Voltmeter 6 Products available
  3. Ammeter 6 Products available
  4. Measuring Instruments & Equipment 6 Products available
  5. Relays 1 Products available
  6. Multimeter 1 Products available
  7. Others Products 3 Products available

Transducer

Leading Manufacturer, Supplier & Retailer of Current Transducer, Frequency Transducer, VAR TRANSDUCER, WATT TRANSDUCER and TAP POSITION TRANSDUCER & TEMPERATURE TRANSDUCER.

Current Transducer

Current Transducer
  • Frequency 50 / 60 Hz.
  • Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
  • Output Ripple 0.2% RMS
  • Response Less than 0.5 Sec.
  • Zero Adj. ± 2% Min
  • Span Adi. ±10 % Min.
  • Operating Temp. 0° ~ 50° C (RH < 90 %) Non - Condensing
  • Storage Temp -20°C ~ 70°C
  • Overload Continuous 2 x Rated Current, 1.2 x Rated Voltage
  • Breakdown Impulse Voltage 4.5KV, 1 x 40µs (without dewing.)
  • Tempreature Coefficient 0.03% / °C.
  • Dielectric Withstand Voltage between Input / Output / Power / Case 2 KV AC for 1 minute.
  • Insulation Resistance (@ 500V DC) >100MΩ
"MECO-G" AC Current Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
View Complete Details
Ask Latest Price & Details
Frequency Transducer

Frequency Transducer
  • Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
  • Output Ripple 0.2% RMS
  • Response Less than 0.5 Sec.
  • Storage Temp -20°C ~ 70°C
  • Overload Continuous 2 2 x Rated Current, 1.2 x Rated Voltage
  • Breakdown Impulse Voltage 4.5KV , 1 x 40µs (without dewing.)
MECO-G" AC Frequency Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
View Complete Details
Ask Latest Price & Details
VAR TRANSDUCER

VAR TRANSDUCER
  • Frequency 50 / 60 Hz.
  • Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
  • Output Ripple 0.2% RMS
  • Response Less than 0.5 Sec.
  • Zero Adj. ± 2% Min
  • Span Adi. ±10 % Min.
  • Dielectric Withstand Voltage between Input / Output / Power / Case 2 KV AC for 1 minute.
  • Insulation Resistance (@ 500V DC) >100MΩ
"MECO-G" AC Reactive (VAR)Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable and are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
View Complete Details
Ask Latest Price & Details
WATT TRANSDUCER

WATT TRANSDUCER
  • Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
  • Output Ripple 0.2% RMS
  • Operating Temp. 0° ~ 50° C (RH < 90 %) Non - Condensing
  • Storage Temp -20°C ~ 70°C
  • Overload Continuous 2 x Rated Current, 1.2 x Rated Voltage
  • Breakdown Impulse Voltage 4.5KV , 1 x 40µs (without dewing.)
  • Tempreature Coefficient 0.03% / °C.
  • Dielectric Withstand Voltage between Input / Output / Power / Case 2 KV AC for 1 minute.
  • Insulation Resistance (@ 500V DC) >100MΩ
"MECO-G" WATT Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
View Complete Details
Ask Latest Price & Details
TAP POSITION TRANSDUCER & TEMPERATURE TRANSDUCER

TAP POSITION TRANSDUCER & TEMPERATURE TRANSDUCER
  • Resistance Input Aux. Supply 24VDC, 48VDC, 110VDC, 220VDC, 110VAC, 230VAC (Any One)
"MECO-G" Tap Position Transducers converts a resistance input to a standard DC output signal which is directly proportional to the input resistance. This DC output signal is Optically Isolated, Ripple Free and Stable. These accurate and reliable outputs are suitable for Telemetering, Data Loggers, PLCs and SCADA systems
View Complete Details
Ask Latest Price & Details
SIGNAL ISOLATION TRANSDUCER & DC ISOLATION TRANSDUCER

SIGNAL ISOLATION TRANSDUCER & DC ISOLATION TRANSDUCER
  • Frequency 50 / 60 Hz.
  • Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
  • Output Ripple 0.2% RMS
  • Response Less than 0.5 Sec.
  • Zero Adj. ± 2% Min
  • Span Adi. ±10 % Min.
  • Operating Temp. 0° ~ 50° C (RH < 90 %) Non - Condensing
  • Storage Temp -20°C to 70°C
  • Overload Continuous 2 x Rated Current, 1.2 x Rated Voltage
  • Tempreature Coefficient 0.03% / °C.
  • Insulation Resistance (@ 500V DC) >100MΩ
"MECO-G" Signal Isolating and DC Isolation Transducers provide a stable ripple free & optically Isolated DC output signal for various DC voltage & current Input signals. These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.