Hydrocarbon wax (HC wax ) is an excellent external lubricant for PVC Processing .PVC has natural tendency of sticking to metal at the time of processing and hence it is not lubricated externally and as such the extrusion results are not satisfactory.
By using HC Wax as a Lubricant , one will achieve higher rate of production, shining smooth internal and external surface.
HYDROCARBON WAX - (IN HDP Bag) -
Characteristics Unit Specification Test Method
Drop Melting Point C 85 ± 5
ASTM D 127-63
Congealing Point C 75 ± 5 ASTM D 938-71
Flash Point C 280 ± 10 IS 1448 P-21
Oil Content % 3 to 8 ASTM D 728-68
Colour - 4 to 6.0 ASTM D 1500
Saponification Value mg 2.5 Max IS 1448 P-55
Nature Free Flow
Application
�H. C. WAX� is an excellent external lubricant for PVC Processing. �H. C. WAX� is mainly recommended for extrusion of Rigid PVC Pipes, PVC Profiles, PVC Wires & Cables, PVC Rigid and Semi Rigid Film and Sheets, PVC Tube and PVC Tubing.
Dosage
The Optimum dosage will depend upon individual application, other ingredients present in the formulation. Equipment used for extrusion and experience of technical personnel.
On Our Part We Suggest
� PVC pipes & profiles: 0.5 to 1.5%
� PVC films & sheets: 0.5%
� PVC wires & cables: 0.3% to 0.5%
� PVC tape & tubing: 0.5%
We are also in the position to manufacture Hc wax with higher Melting point as per customers requirement.

Hydrocarbon wax (HC wax ) is an excellent external lubricant for PVC Processing .PVC has natural tendency of sticking to metal at the time of processing and hence it is not lubricated externally and as such the extrusion results are not satisfactory.
By using HC Wax as a Lubricant , one will achieve higher rate of production, shining smooth internal and external surface.
HYDROCARBON WAX - (IN HDP Bag) -
Characteristics Unit Specification Test Method
Drop Melting Point C 85 ± 5
ASTM D 127-63
Congealing Point C 75 ± 5 ASTM D 938-71
Flash Point C 280 ± 10 IS 1448 P-21
Oil Content % 3 to 8 ASTM D 728-68
Colour - 4 to 6.0 ASTM D 1500
Saponification Value mg 2.5 Max IS 1448 P-55
Nature Free Flow
Application
�H. C. WAX� is an excellent external lubricant for PVC Processing. �H. C. WAX� is mainly recommended for extrusion of Rigid PVC Pipes, PVC Profiles, PVC Wires & Cables, PVC Rigid and Semi Rigid Film and Sheets, PVC Tube and PVC Tubing.
Dosage
The Optimum dosage will depend upon individual application, other ingredients present in the formulation. Equipment used for extrusion and experience of technical personnel.
On Our Part We Suggest
� PVC pipes & profiles: 0.5 to 1.5%
� PVC films & sheets: 0.5%
� PVC wires & cables: 0.3% to 0.5%
� PVC tape & tubing: 0.5%
We are also in the position to manufacture Hc wax with higher Melting point as per customers requirement.