Mumbai, Maharashtra, India
GST : 27AAKFJ2381B1ZJ
Verified
Add Review
Our Products
Vanes are made in the range of carbon material (carbon graphite) metal impregnated carbon graphite and resin-bounded graphite to meet many different applications. Carbon vanes are self-lubricating and therefore ideal for pumps, handling liquids whose lubricating properties are poor, such as petrol, diesel etc. They can also operate in unlubricated compressors to deliver air or gas uncontaminated by lubricating oil or grease.
'SUPERTEX' Rotary Joint is a self-supporting Rotary Joint used to admit steam or fluids in to textile machines, Drying Ranges, Calenders, Sizing Machines-Paper Machines and other machines with rotating heating or cooling cylinders, rolls or drumps. It is suited for the higher pressure and operating speeds. Carbon Guide & Seal Rings are provided of high quality material. Suitable siphon elbow can be furnished with the joints.
Starch Paste Kettle is designed as per good manufacturing practices in terms of clean ability of components, surface finished, absence of sharp corners, assembling and dissembling of components and control devices. Machine can be design as per jacketed type, electrically or stream heated, thermostatic control with the unit, safety valve, insulated with suitable insulating material, tilting with hand wheel. Easy transfer of paste while tilting, unit will be provided with suitable lid, suitable discharge bottom valve for steam water, which should easily removable and easily cleanable.
We specializes in the manufacture of Impervious Carbon Bricks (AF) Quality (Confirming to as per ASTM or DIN Standard) especially developed for Highly Corrosion Resistance, Excellent Resistance to Thermal Shocks, High Crushing Strength, High Thermal Conductivity & it withstand a temperature upto 180c. Very minimum Porosity i.e. 2-3 % & Maximum Carbon content i.e.98 % and Low Ash.
This machine is used for tabletting different kinds of granular raw materials into round tablet. It is applicable to trial manufacturing in Lab or batch produce in small amount different kinds of tablet, sugar piece, calcium tablet and tablet of abnormal shape. It features a small desktop type press for motive and continual sheeting .It can also be hand-operated.
| Sailent Features
|
Multi mill is widely used for wet and dry granulation, pulverization etc. of pharmaceutical, chemical, bulk drug, cosmetic, colours, dyestuffs, food products etc. The unit consists of stainless steel hopper, processing chamber with beater assembly, motor, DOL starter, three speed pulley, screen and sturdy body.
| Working Cap. in litres | Discharge Valve Size in inches | Overall Dimensions in length width height | Speed RPM | H.P. | ||
| 300 | 6" | 2000 | 1100 | 2000 | 5/10 | 3.0 |
|
400 |
6" |
2100 |
1200 | 2100 | 5/10 | 3.0 |
|
600 |
6" | 2300 | 1400 | 2300 | 5/10 | 3.0 |
| 800 | 6" | 2350 | 1800 | 2350 | 5/8 | 5.0 |
| 1000 | 6" | 2400 | 1900 | 2400 | 4/6 | 5.0 |
This Pulverizer with SS 304 Contact parts is specially designed for wet & dry grinding of all types of materials such as Wet Dal, Rice, Chutney, Wheat Powder, Besan and Herbs etc are also easily powdered to the required mesh. The machine consists of high speed swinging homers, which are hardened and tampered up to the required degree. This pulveriser has a very long life with minimum wear & tears parts. Oiling and Greasing should be done at regular intervals for smooth operation.
Sailent Features
|
| TYPE | SIZE | MOTOR | MOTOR | R.P.M. | CAPACITY/Hr |
| AT-01 | 6”x4” | 1.5 H.P. | 8” | 3500 | 10–15 Kg |
| AT-02 | 8”x4” | 2 H.P. | 8” | 3500 | 15–20 Kg |
| AT-03 | 10”x5” | 3 H.P. | 10” | 4000 | 20–25 Kg |
| AT-04 | 12”x5” | 5 H.P. | 10” | 4000 | 25–40 Kg |
| AT-05 | 14”x6” | 7.5 H.P. | 10” | 4000 | 50–60 Kg |
| AT-06 | 16”x10” | 10 H.P. | 10” | 4000 | 80–100 Kg |
This roaster is designed and manufactured utilizing the finest grade basic materials and advanced technology. Due to its salient features like longer functional life, robust construction, optimum efficiency and excellent performance, this roster cum blender is widely demanded among our clients. We offer this Roaster cum Blender for the specific needs of clients.
A cabinet tray dryer is an enclosed insulated chamber in which trays are placed on top of each other in trolleys. Tray Dryer are used where heating and drying are essential parts of manufacturing process in industries such as Chemicals, Dye stuff, Pharmaceutical, Food Products, Colors etc.
|
|
uger filler, also known as semi automatic powder filler which is used to fill accurate weight size of powder in bottles, pouches. Auger filler is powder filling equipment which can be set to fill various types of powder.
|
|
Shrink tunnel, shrink packager series are widely applied to the shrink package of foodstuff beverage pharmaceuticals home appliances cosmetics and so on.
Adopt double layer heat insulation framework and more reasonable inner circulate hot winds in two directions to ensure insulating heat and reduce the loss the heat, and in favor of the orientation shrink of the products. It bear heavy objects and high temperature resistant. The exit parts equipped with strong cooling fans.
Seal your pouches faster with Continuous / Band sealer. All types of Heat sealable pouches like L.D., P.P., and Laminated Pouches can be sealed quickly with desirable speed. Pouches are just to be kept on the conveyor, which carries on the pouch along.
| Sealing Width | 5 mm to 15 mm |
| Sealing Length | No Limit for Length |
| Voltage | 230V / 50 Hz |
| Power Consumption | 500 W |
| Temperature Range | 0 to 300 degree C |
| Maximum Conveyor Load | 10 Kg |
| Machine size (in mm) | 900 x 450 x 500 mm |
| Machine Weight | 30 kg Approx. |
The Brush Holder is very important to the life and operating efficiency of the brush and also to the parent machine. The quality of the brush performance is always dependent on the design and ability of the Brush Holder which supports it against the commutator or slip ring.Our research departments, with it's experience of more then 30 years in the field, has developed best quality materials for manufacturing brush holders suitable for their particular applications. We use the highest grade materials in the production of Brush Holders, such as brass sheet extrusions, sand castings, brass investment castings etc. which are proven to show the best possible heat dissipation and much resistance to mechanical strain.
The Brush Holders can be supplied with surface treatment against corrosion, to enhance their performance and life span.
Every where temperatures are occur and oil free slide ways are required. Graphite Carbons finds employment as a lubricating material especially in Textile Industries are Asbestos Graphite Slide Rails used in ordered to avoid contamination fron the normally used lubricating agents.We have developed Asbestos Graphite Slide Rails for FAMATEX, MONFORTS, BRUCKNER, KRANTZ STENTER MACHINES for which we have received the technical know-how from abroad. It has properties like Self-lubricating Durability, Long life, Strong enough with a good flexibility and highly heat resistance. In result of these, Stenter Machines will run smoothly without much load over the Electrial, Motors and also it will increase the life of Stenter Clips.
Different type of Graphite synthetic sliding part & synthetic bushes use in different stenter machine clips.
The Graphite is use where the properties of lubrication is required. Graphite is use in different kind of industries for lubrication purpose where the working temperature is high. Graphite material are mainly use in cement industries in Kiln plant where the lubrication purpose is required. Graphite comes in different form such as Powder, Rods, Block, etc. They are machined as per the drawing or size according to the requirement.
The GCC 201 SeriesSeals are designed to handle liquids of varying contaminations including sluries, sludges, sewage, viscous or abrasive etc. as these seals are self cleaning and non-clogging. These seals have a simple, compact design and are easy to install with practically no maintenance.
The GCC 201 Seriesare unbalanced type seals. The rotary unit utilises a standard seal face with a single spring and secondary seal ring. This single spring is stronger and sturdier then multi-spring construction.
Secondary Seal Rings are available in various forms such as 'O' Rings, 'V' Rings, Square Rings, Wedge and in various elastomers such as viton, neoprene, silicon, Bunna-N, EPT, Teflon, GFT, Grafoil, etc. The mating faces can be of high grade carbon, stellite, tungsten carbide, ceramic, etc. depending on the service conditions.
The mediums are water, waste-water, for subersible & chemical pumps & equipment. To suit mediums such as oil, water & weak corrosive liquid.
We have wide range of Anticorrosion Solutions product. Keeping in view especially for the Chemical reactor for various chemical reaction in industries like Heavy Chemical, Pharmaceuticals, Food &Drug, Dye and Pigment , Paints, Adhesive, Color, Concrete related chemicals where they are facing corrosive problems, Heating and Cooling reaction required and prevention of M.S. / S.S. reactor / G.L./& Lead bonded reactors . We have developed Graphite Tiles for the Reactors, Jackketed Vessels & Storage tank, &Agitators.
