Our Products

Distribution Transformer 4 Products available
Transformers 7 Products available
Battery Chargers 6 Products available
Voltage Stabilizer 4 Products available
Others 7 Products available

Other Products / Services #343111

Dc Regulated Power Supply

Output Voltage Range 0 to 1000 V
Output Maximum Wattage 5000 Watt
Operating Temperature 0 to 50oC
Output Current 0 to 100 amp.
Load Regulation Typical 0.05 % ( From No Load to Full Load)
Line Regulation Typical 0.05%
Ripple Better than 0.1% Vrms Max. (With / Without Load)
Output Stability 0.1 % ( After Warm up of 20 minutes)
Digital Meter ( Separate Meter For DC Voltage and current)

Our DC regulated power supply are widely used in various industries and educational Institutes. The output voltage produced by our DC Regulated Power Supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Our power supply is provided with Digital Panel Meters for voltage and current. Additionally, equipped with power supply overload and short circuit protection. The input power required by our power supply is 230 V or 110 V 10%, and 5060 Hz with operating temperatures 0 to 50oC. Moreover, we can customize these as per the specification provided by our clients.

View Complete Details

Ask Latest Price & Details

Resincast CTS

Resincast Transformer is made with supreme grade of components and advanced technology. The transformer is perfectly finished in charming colors that gives it longer service life. It is completely sealed to impart excellent performance even in flame retardant, polluted, corrosive atmosphere and vibration proof.

Transformers are electric equipment that changes the voltage and the current of electricity to facilitate its efficient transmission and distribution. Transformers are commonly used at power generation facilities to increase voltage and to decrease current in order to transport electric energy across transmission lines. When the electricity reaches the end user, transformers are used to reduce voltage and to increase current to make the electricity suitable for general use. The process of transforming voltage results in energy loss that is released in the form of heat and therefore transformers must contain effective cooling systems. Transformers are differentiated by their cooling systems (this is one of several ways that the transformer industry classifies its products). Dry type transformers dissipate heat directly into the ambient air. Liquid cooled transformers (e.g. oil filled transformers) dissipate heat into liquid mediums.

View Complete Details

Ask Latest Price & Details

Switching Mode Power Supplies SMPS AC DC Converter

Cooling Natural Cooling
Input voltage 110 to 270 AVC
Input frequency 47 to 55 Hz
Inrush current Cold start Limited by NTC thermistor
Overload Protection Constant voltage, constant current 105% to 120% output foldback limiting.
Holdup time Greater than 20 m sec.
High voltage test I / P to O / P 3 KV 1 min.,

GSA offers you a wide range of high quality Switching Mode Power Supplies. Switching Mode Power Supplies are used in all areas of control and automation such as Machine tools, Packaging, Injection Moulding, Automobile Industries, Process Industries and other Automated Systems.

View Complete Details

Ask Latest Price & Details

Summation CT

The Summation Ct is developed by using advance KPV knee-point-voltage technology and premium grade of raw material. The product is developed as per the requirements and demand of the customers.

View Complete Details

Ask Latest Price & Details

Protection Ct's

We are India based renowned manufacturer supplier and exporter of huge range of Protection CT's. It range operate exactly above 100% and upto 10 to 15 times of rated current i.e., overloads. It helps in providing true fault signal to the relay. The range has high capacity to handle the large current and is costly and bulky in nature. This protective and metering Current Transformer cannot be interchanged for use.

View Complete Details

Ask Latest Price & Details

DC Power Supply

DC VOLTAGE 50 VDC
RATED CURRENT 15 AMP
RATED POWER 750 W
VOLTAGE RANGE 300 V âÂÂ 450 V
FREQUECY RANGE 47 Hz âÂÂ 63 Hz

We are one of the leading manufacturer and supplier of DC Power Supply with 3 phase input, fabricated from superior quality of raw materials. With features like short circuit protection, overload, over voltage and over heat protection along with lock for each output, these are a dummy text of the printing and typesetting industry. Available in 50VDC, 15 amp, 750W, with Voltage Range: 300 V 450 V and Frequency Range: 47 Hz 63 Hz, these are made in our state of the art production unit with international quality standards.
Short Circuit Protection overloadover voltageover heat.

View Complete Details

Ask Latest Price & Details

Manual Battery

RIPPLE LESS THAN 1%

We are engaged in providing well constructed range of 24VDC 36VDC48VDC Fully AutomaticManual Battery. It is developed with superior grade of raw material and modern technology. The product is used in industrial and commercial sectors due to its high performance, high durability and international quality standards. The Manual Battery Charger is available with IP voltage of 160VAC -270VAC and OP voltage of 12 VDC 24VDC 36VDC 48VDC and charging voltage of 13.5 VDC 27VDC 38VDC 50VDC.

S. No.	DESCRIPTION	SPECIFICATION
1	I/P VOLTAGE	160V -270V
2	O/P VOLTAGE	24 VDC / 36VDC / 48VDC to 110VDC
3	CHARGING VOLTAGE	27 VDC /38VDC / 50VDC to 120VDC
4	CHARGING /BOOST CURRENT	5 AMP/10 AMP/15 AMP/20 AMP/25 AMP

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Gaurav Saini (G. S. A. Industries)
1- Plot No -383, Rampura Delhi, 110 035, - 110035, India
Share us via

View Contact No.

Our Products

Distribution Transformer 4 Products available
Transformers 7 Products available
Battery Chargers 6 Products available
Voltage Stabilizer 4 Products available
Others 7 Products available

Other Products / Services #343111

Dc Regulated Power Supply

Output Voltage Range 0 to 1000 V
Output Maximum Wattage 5000 Watt
Operating Temperature 0 to 50oC
Output Current 0 to 100 amp.
Load Regulation Typical 0.05 % ( From No Load to Full Load)
Line Regulation Typical 0.05%
Ripple Better than 0.1% Vrms Max. (With / Without Load)
Output Stability 0.1 % ( After Warm up of 20 minutes)
Digital Meter ( Separate Meter For DC Voltage and current)

View Complete Details

Ask Latest Price & Details

Resincast CTS

Resincast Transformer is made with supreme grade of components and advanced technology. The transformer is perfectly finished in charming colors that gives it longer service life. It is completely sealed to impart excellent performance even in flame retardant, polluted, corrosive atmosphere and vibration proof. Transformers are electric equipment that changes the voltage and the current of electricity to facilitate its efficient transmission and distribution. Transformers are commonly used at power generation facilities to increase voltage and to decrease current in order to transport electric energy across transmission lines. When the electricity reaches the end user, transformers are used to reduce voltage and to increase current to make the electricity suitable for general use. The process of transforming voltage results in energy loss that is released in the form of heat and therefore transformers must contain effective cooling systems. Transformers are differentiated by their cooling systems (this is one of several ways that the transformer industry classifies its products). Dry type transformers dissipate heat directly into the ambient air. Liquid cooled transformers (e.g. oil filled transformers) dissipate heat into liquid mediums.

View Complete Details

Ask Latest Price & Details

Switching Mode Power Supplies SMPS AC DC Converter

Cooling Natural Cooling
Input voltage 110 to 270 AVC
Input frequency 47 to 55 Hz
Inrush current Cold start Limited by NTC thermistor
Overload Protection Constant voltage, constant current 105% to 120% output foldback limiting.
Holdup time Greater than 20 m sec.
High voltage test I / P to O / P 3 KV 1 min.,

View Complete Details

Ask Latest Price & Details

Summation CT

The Summation Ct is developed by using advance KPV knee-point-voltage technology and premium grade of raw material. The product is developed as per the requirements and demand of the customers.

View Complete Details

Ask Latest Price & Details

Protection Ct's

View Complete Details

Ask Latest Price & Details

DC Power Supply

DC VOLTAGE 50 VDC
RATED CURRENT 15 AMP
RATED POWER 750 W
VOLTAGE RANGE 300 V âÂÂ 450 V
FREQUECY RANGE 47 Hz âÂÂ 63 Hz

We are one of the leading manufacturer and supplier of DC Power Supply with 3 phase input, fabricated from superior quality of raw materials. With features like short circuit protection, overload, over voltage and over heat protection along with lock for each output, these are a dummy text of the printing and typesetting industry. Available in 50VDC, 15 amp, 750W, with Voltage Range: 300 V 450 V and Frequency Range: 47 Hz 63 Hz, these are made in our state of the art production unit with international quality standards.Short Circuit Protection overloadover voltageover heat.

View Complete Details

Ask Latest Price & Details

Manual Battery

RIPPLE LESS THAN 1%

S. No.	DESCRIPTION	SPECIFICATION
1	I/P VOLTAGE	160V -270V
2	O/P VOLTAGE	24 VDC / 36VDC / 48VDC to 110VDC
3	CHARGING VOLTAGE	27 VDC /38VDC / 50VDC to 120VDC
4	CHARGING /BOOST CURRENT	5 AMP/10 AMP/15 AMP/20 AMP/25 AMP

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Gaurav Saini (G. S. A. Industries)
1- Plot No -383, Rampura Delhi, 110 035, - 110035, India
Share us via

View Contact No.