Gujarat Machinery Private Limited - Machines And Equipments

Controlling unit

• Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
• Heating Zone : 8 nos.
• Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
• Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
• Other Features : Equipped with Length-Meter counter & Alert-Buzzer System. Length can be freely set as needed. After reaching the set length, the meter counter will give signal.

Plastic Sheet Extrusion Plant are developed for manufacturing Plastic Sheets of Various Sizes Width & thickness from PP, HDPE, PET & PVC. All our Models are available with options of Double Layer Model "IDSP-DL" and Three Layer Model IDSP-TL also.

First in india to launch fully inverter duty Tape Stretching Plants along with inverter duty winders.Extrusion Plants with low process variations in terms of Denier, GSM & Film Thickness in Microns.Extrusion Plants with negligible maintenance costs as machines are manufactured with world standard components.Extrusion Plants with lowerst energy consumption in their class with options of centralised computer control & are most economical to run.

Main Technical Parameters

• Production Efficiency : 1000-2000m/h
• Width of ProductMax : 1500mm
• Overall Size : 8000mm x 2300mm x 2000mm
• Mounted power : 40kw @ 440 Volts / 50 Hz.
• Total weight : 2.5t
• Utility Rquirements : Compressed Air : 0.20.4 m3/min, 0.6Mpa

Machine Unit

• Size of Thickening Roller : 192mm1600mm
• Material of Thickening Roller : Steel.
• Open and Close method of Thickening roller : Motorized up and down of Two Rolls.
• Drive power : 1.1kW x 3
• Driving method : Gear box driven by Motor, Direct Transmission, Easy Operation, Safety and Beauty.
• Heating Method : Electric Heating
• Heating Box One Set : Composed of 10 Heaters
• Heating Power : 3.5kW x 10 pcs
• Air Engine Power : 1.5KW
• Needle Roller : 100mm x 1600mm
• Haul-Off roller : 100mm x 1600mm
• Haul-Off Material : Rubber
• Open and Close Method : Driven by Cylinder.
• Winding Method : Torque Motor Control
• Winding Motor Torque : 16Nm

Controlling unit

• Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
• Heating Zone : 8 nos.
• Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
• Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
• Other Features : Equipped with Length-Meter counter & Alert-Buzzer System. Length can be freely set as needed. After reaching the set length, the meter counter will give signal.

For Manufacturing Laminated Tarpaulins Geo-Textiles, Non-Wovens & Jute.

Range and Capacity :-

From 100Kgs/hr to 900kgs/hr. for PP/HDPE.

Salient Features :-

• First in india to launch fully inverter duty Tape Stretching Plants along with inverter duty winders.
• Extrusion Plants with low process variations in terms of Denier, GSM & Film Thickness in Microns.
• Extrusion Plants with negligible maintenance costs as machines are manufactured with world standard components.
• Extrusion Plants with lowerst energy consumption in their class with options of centralised computer control & are most economical to run.

Extrusion Lamination Plants

Extrusion Lamination Plants have been developed for LDPE / PP Extruded film Lamination on Woven Sacks / Knitted Bags, Woven Fabrics, BOPP, Paper, Aluminium Foil, Pre-Printed BOPP, Non Wovens, Jute, Tarpaulins, Geo Textiles & many other applications.

Range and Capacity :-

From 1000mm width upto 6000mm Width Having Capacity starting from 100kgs/hr upto900kgs/hr and line speed of more than 200mtr/min

Salient Features :-

• Extrusion Lamination and Coating Plants with High Speed High Production upto 200mts/min for Flat and Clircular Woven Fabrics. Sandwitch Lamination of printed BOPP. Polyster, Paper, Jute, Non-Wovens, Cotton Fabrics, Woven Sacks, Fabrics, Aluminium Foils and Tarpaulins.
• Our Highest Selling, Proven and Versatile High Speed High Production Extrusion Lamination plants for Laminating, Woven Sacks, Jumbo Bags and FIBC Fabrics, sandwitch lamination of BOPP/Polyster , CPP, Paper and Aliminium foils, now available withMIXTRUDE Technology