Bearings #2369837

We are offering Spherical Roller Bearings in different types such as EA, C, CD, CA, which are designed for high load capacity. The type EA, C and CD of Spherical Roller Bearings have pressed steel cages and type CA has machined brass cages. Type EA of Spherical Roller Bearings has especially high load capacity, features low torque, and has a high-strength cage. An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed with e4. To use these Spherical Roller Bearings with oil grooves and holes, it is recommended to provide an oil groove in the housing bore, since the depth of the groove in the bearing is limited.

We are offering Flat Mounted Table Bearings that offer a link between mobile elements. An alternate base must have a capacity to transmit the stresses of a mobile towards a base. It is necessary to accurately define all the actual stresses applied so that a bearing can be selected. Flat Mounted Table Bearings are available in sizes up to 300mm. Flat Mounted Table Bearings consist of two thorough hardened or induction hardened standard bearing steel races (rings), a special polymer spacers and complement of super precision steel balls. The specially designed raceways increase load capacity and stiffness in moment loading while guaranteeing high precision long service lifetime and very low coefficient of friction. These Flat Mounted Table Bearings can also be supplied with specially designed spring steal seals depending upon application. These bearings make it possible to reduce the size of many precision rotary bearing systems. These Flat Mounted Table Bearings can replace a double back or face mounted angular contact bearing pair at a substantial savings of space and cost.  

Features :

• Assembly is done as per standard and guidelines for ball bearings
• Operating temp of an outside diameter up to 300mm is generally heat treated to retain dimensional stability up to 120^oc
• Higher operating temperature require special heat treatment lubrication
• Bearings are delivered with durable lubrication according to application
• Greasing must be carried out during rotation at low speed through greasing nipple at a frequency of every 500 hrs during normal usage
• Greasing is required before & after a long idle period
• Delivery of these bearings are supplied duly wrapped in special corrosion preventing and moisture repelling paper along with durable lubrication
• Our products have 12 months warranty (for manufacturing defect) from the date of supply
• Their assembly requires particular caution.
• Any action of dismantling bearings or replacement of any elements is definably inadvisable and cancels the warranty.

Special environment in case when the working environment is particularly aggressive :

• Sea atmosphere
• Dusty & abrasive environment particularly protection devices must be incorporated such as labyrinths, shields and oil bath.

Angular Contact Ball Bearing consists of an inner ring along with an outer ring, ball, and a cage which contains and separates the ball. Angular Contact Ball Bearings have been specifically designed with a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, as an axial component is generated when a radial load is applied, these Angular Contact Ball Bearings are used in pairs, triplex sets, quadruplex sets, or multiplex sets.

Highlights :

• Precision design
• Smooth performance
• Highly durable
• Perfect finish

this type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.however, depending on the surrounding structure, such an angle may not be possible.

We are offering high quality Thrust Ball Bearings, which are classified into flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). These Thrust Ball Bearings can sustain axial loads but not the radial loads. For single-direction, Thrust Ball Bearings with pressed steel cages and machined brass cages are usually used. The cages in double-direction Thrust Ball Bearings are the same as those in single-direction ones with same diameter series.

Highlights :

• Durable
• Superior finish
• Smooth performance
• Corrosion free

extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments, and industrial machinery.

We are instrumental in offering Tapered Roller Bearings. The Tapered Roller Bearings are precisely engineered to manage both thrust and radial loads on rotating shafts and in housings. We make available Tapered Roller Bearings in single, double and four-row tapered roller bearing configurations. Also, we specialize in providing Tapered Roller Bearings in customized geometries and surfaces.

Tapered Roller Bearings consist of :

• Cone, or inner ring
• Cup, or outer ring
• Tapered rollers, or rolling elements
• Cage, or roller retainer

Leveraging to our team of skilled engineers and modern technology, we are offering precision engineered Deep Groove Ball Bearings. They feature deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls. The Deep Groove Ball Bearings are simple in design and suitable for high and even very high speeds. We make available Deep Groove Ball Bearings in many designs, variants and sizes.

Our company holds expertise in offering Robotic Arm Bearing. Our Robotic Arm Bearing consists of two thorough hardened or induction hardened standard bearing steel races (Rings), a special polymer spacers and complement of super precision steel balls. The Robotic Arm Bearing is widely applauded for increased load capacity and stiffness in moment loading. Also, it is highly durable in nature owing to its high grade fabrication. Further, Robotic Arm Bearing can also be provided with specially designed spring steal seals as per the requirement.

Sizes Available : Up to 300mm

We are engaged in offering Cylindrical Roller Bearings that are in linear contact with the raceways. These Cylindrical Roller Bearings have high radial load capacity and are suitable for high speeds. There are different types Cylindrical Roller Bearings designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, AND NN (for double-row bearings depending on the design or absence of side ribs). The outer and inner rings of all types are separable. Some Cylindrical Roller Bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other. These Cylindrical Roller Bearings can be used as free-end bearings. Cylindrical Roller Bearings, in which either the inner or outer ring has two ribs or the other ring has one, are capable of taking some axial load in one direction. Double-row Cylindrical Roller Bearings have high radial rigidity and are used primarily for precision machine tools. Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used in these Cylindrical Roller Bearings.