Jalandhar, Punjab, India
Our Products
* High accuracy, easy reading of all dias clear & functional of all operating elements, sturdy yet good looking practical design. These are widely used for circular cutting, angle cutting, boring and spot facing with a milling macine.
* Works as an index center in the vertical position, as well as conventional Rotary Table, graduated 360
Provision for fine adjustments when setting work piece.
| Dia of Table (in mm) | 150 | 200 | 250 | 300 | 375 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| Size in inches | 6 | 8 | 10 | 12 | 15 | 18 | 20 |
| Table T-Slot Size | 10 | 13 | 13 | 16 | 16 | 20 | 20 |
| Centre Bush Bore (morse taper) | 2 | 3 | 3 | 3 | 3 | 4 | 4 |
| Worm & Gear Ratio | 1:72 | 1:72 | 1:72 | 1:120 | 1:120 | 1:120 | 1:120 |
| Wheel Calibration (in minutes) | 2 | 2 | 2 | 1 | 1 | 1 | 1 |
| Height Overall | 95 | 105 | 110 | 130 | 135 | 160 | 160 |
| Weight in kgs | 14 | 23 | 36 | 55 | 95 | 162 | 177 |
special design for angle setting on various machine tools.
* low profile for larger working space.
* the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.
* can be adjusted by 45 degree on both right-hand and left-hand side.
* the angle marking are accurate and easy to read.
| Size of Table (in mm) | 125 x 175 | 175 x 150 | 250 x 375 |
|---|---|---|---|
| Size in inches | 5 x 7 | 7 x 10 | 10 x 15 |
| Height Overall | 98 | 168 | 174 |
| T-Slot Size | 13 | 16 | 16 |
| Calibration code | 0 to 90° | 0 to 90° | 0 to 90° |
| Weight in Kgs. | 9 | 22 | 45 |
* Close grained graded casting properly machined and grinded with a accurate process provides accuracy well within 0.01/100mm tolerance
* Dovetailed slides have adjustable steel ribs for smooth running and adjustment
* Fine Acme thread screw.
| Size in inches | 6x6 | 8x8 | 10x10 | 12x12 | 12x8 |
|---|---|---|---|---|---|
| Table T-Slot Size | 150x150 | 200x200 | 250x250 | 300x300 | 300x200 |
| Height | 115 | 120 | 130 | 145 | 145 |
| Length | 300 | 350 | 350 | 510 | 510 |
| T-Slot | 10 | 10 | 13 | 14 | 14 |
| Travel Both Ways | 100 | 125 | 125 | 200 | 200 |
| Calibration | 90s | 90s | 90s | 90s | 90s |
| Wheel Graduation | .001 | .001 | .001 | .002 | .002 |
| Wight in kgs | 13 | 18.5 | 24 | 44 | 38 |
High accuracy, easy reading of all dias clear & functional of all operating elements, sturdy yet good looking practical design. These are widely used for circular cutting, angle cutting, boring and spot facing with a milling macine.
* Works as an index center in the vertical position, as well as conventional Rotary Table, graduated 360
Provision for fine adjustments when setting work piece.
| Dia of Table (in mm) | 150 | 200 | 250 | 300 | 375 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| Size in inches | 6 | 8 | 10 | 12 | 15 | 18 | 20 |
| Table T-Slot Size | 10 | 13 | 13 | 16 | 16 | 20 | 20 |
| Centre Bush Bore (morse taper) | 2 | 3 | 3 | 3 | 3 | 4 | 4 |
| Worm & Gear Ratio | 1:72 | 1:72 | 1:72 | 1:120 | 1:120 | 1:120 | 1:120 |
| Wheel Calibration (in minutes) | 2 | 2 | 2 | 1 | 1 | 1 | 1 |
| Height Overall | 95 | 105 | 110 | 130 | 135 | 160 | 160 |
| Weight in kgs | 14 | 23 | 36 | 55 | 95 | 162 | 177 |
Direct reading to 2 minutes for size 6", 8" and 10" on hand wheel scale.
* Accuracy : Maximum error 4 minutes of circular division using hand wheels
* Working surface rotates in its own plan to within 0.03mm
* Horizontal and Vertical supporting surface square with 0.01mm/100mm
* Direct reading to 1 minute for size 12" on hand sheet scale & Table flatness within 0.01mm/100mm & Center bush bore is true to table axis within 0.03mm
| Dia of Table (in mm) | 150 | 200 | 250 | 300 | 375 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| Size in inches | 6 | 8 | 10 | 12 | 15 | 18 | 20 |
| Table T-Slot Size | 10 | 13 | 13 | 16 | 16 | 20 | 20 |
| Centre Bush Bore (morse taper) | 2 | 3 | 3 | 3 | 3 | 4 | 4 |
| Worm & Gear Ratio | 1:72 | 1:72 | 1:72 | 1:120 | 1:120 | 1:120 | 1:120 |
| Wheel Calibration (in minutes) | 2 | 2 | 2 | 1 | 1 | 1 | 1 |
| Height Overall | 240 | 300 | 365 | 425 | 530 | 620 | 620 |
| Weight in kgs | 16 | 27 | 42 | 65 | 100 | 175 | 187 |
* Close grained graded casting properly machined and grinded with a accurate process provides accuracy well within 0.01/100mm tolerance
* Dovetailed slides have adjustable steel ribs for smooth running and adjustment
* Fine Acme thread screw.
| Size in inches | 6x6 | 8x8 | 10x10 | 12x12 | 12x8 |
|---|---|---|---|---|---|
| Table T-Slot Size | 150x150 | 200x200 | 250x250 | 300x300 | 300x200 |
| Height | 115 | 120 | 130 | 145 | 145 |
| Length | 300 | 350 | 350 | 510 | 510 |
| T-Slot | 10 | 10 | 13 | 14 | 14 |
| Travel Both Ways | 100 | 125 | 125 | 200 | 200 |
| Calibration | 90s | 90s | 90s | 90s | 90s |
| Wheel Graduation | .001 | .001 | .001 | .002 | .002 |
| Wight in kgs | 13 | 18.5 | 24 | 44 | 38 |
