Our Products
* Accuraterly machined housing assure smooth sliding movement.
* Square body seating provides easy fitment under the bench top so that jaws are flush with the bench top.
* Body and sliding jaw have provision for attaching wooden liners to protect the vice, work piece and working tools.
* Vice jaws equipped with a "TOE-IN" feature. When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
Size in mm | 150 | 175 | 200 | 225 |
---|---|---|---|---|
Width of Jaws | 150 | 175 | 200 | 225 |
Opening of Jaws | 180 | 230 | 260 | 330 |
Weight in Kgs. | 4.6 | 8.1 | 10.5 | 15.3 |
* Continuous Scew giving powerful grip on work.
* No Lifting of the sliding jaw.
* Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.
Size in mm | 75 | 100 | 150 |
---|---|---|---|
Size in inch | 3 | 4 | 6 |
Width of Jaws | 75 | 100 | 150 |
Opening of Jaws | 75 | 100 | 150 |
Weight in Kgs. | 5 | 8 | 16 |
* Continuous Screw giving powerful grip on work.
* No Lifting of the sliding jaw.
* Jaws fitted from outer side of Body
* Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.
Size in mm | 75 | 100 | 125 | 150 |
---|---|---|---|---|
Size in inch | 3 | 4 | 5 | 6 |
Width of Jaws | 75 | 100 | 125 | 150 |
Opening of Jaws | 75 | 100 | 125 | 150 |
Weight in Kgs. | 2.5 | 5 | 9 | 11 |
This vice is also available with 3 mounting options via 2 additional precisely ground surfaces: end face and side face. This allows for drilling along all axes with a single setting of the job and holding of long workpieces which are cumbersome and dificult to manage in regular vices.
Size in mm | 100 |
---|---|
Size in inch | 4 |
Jaw Opening | 100 |
Jaw Width | 100 |
Weight in Kgs. | 4.5 |
* Self centering jaws brings the job in center automatically
* Maufactured to consistent accuracy to give prolonged reliable service
* Fixed base with two side slots for holding the vice
Size in mm | 50 | 75 | 100 |
---|---|---|---|
Size in inch | 2 | 3 | 4 |
Width of Jaws | 50 | 75 | 100 |
Opening of Jaws | 50 | 75 | 100 |
Weight in Kgs. | 3 | 7 | 10 |
* Hobbyist Vice for application that involve working in confined spaces.
* With Swivel Base
Size in mm | 30 | 40 | 50 | 60 | 70 |
---|---|---|---|---|---|
Size in inch | 1.¼ | 1.5/8 | 2 | 2.3/8 | 3 |
Width of Jaws | 30 | 40 | 50 | 60 | 70 |
Weight in Kgs. (F/B) | 0.450 | 0.650 | 0.800 | 1.200 | 2.120 |
Weight in Kgs. (S/B) | 0.670 | 0.750 | 1.100 | 1.670 | 2.920 |
* With integrated clamp which permits easy filling to work on bench or table
* Craftsman's Vices
* Ideal for use by Watch Makers Gold smiths model makers and Dye Enthusiasts for any light duty jobs
Size in mm | 25 | 40 | 50 | 60 | 70 | 100 |
---|---|---|---|---|---|---|
Size in inch | 1 | 1.5/8 | 2 | 2.3/8 | 3 | 4 |
Width of Jaws | 25 | 40 | 50 | 60 | 70 | 100 |
Weight in Kgs. | 0.520 | 0.570 | 0.750 | 0.960 | 1.250 | 1.5 |
Accuracy in parallelism & squareness within 0.02/100mm
* Ductile cast iron body
* This vice is the earlist vice that can be vertical or on either side
* High clamping force can be achieve by the effortless handle movement which eliminates hammering on handle
*Enhanced body structure reduces the deflection in operation while the vice mounted vertical or horizontal
*All parts interchangeable and available as spares.
Ruggedly constructed for milling, drilling, shaping, grinding and many other machine shop applications
* Body made of high quality ductile cast iron to resist deflection or bending
* Hardened and Ground silde ways & Concealed spindle for protection against chip and dirt
* Hydraulic booster system for maximum clamping pressure with minimum force
* Hydra-booster system is guaranteed for using 1 years limited & Accuracy in squareness is 0.2/100mm.
* Quick of clamping, locking and easy operation, the hydraulic oil number is #68
Body of vice made of close grained cast iron, Accurately ground jaws made out of special tool steel for firm grip.
* All swivelling movements have positive locking and the job can be locked at any compound angle.
* Accurately designed for use on surface, universal tool and cutter grinding machines.
Size in mm | 50 | 75 | 100 | 150 |
---|---|---|---|---|
Size in Inch | 2 | 3 | 4 | 6 |
Jaw width | 50 | 75 | 100 | 150 |
Jaw depth | 23 | 35 | 38 | 48 |
Jaw opening | 50 | 75 | 100 | 150 |
Swivel Range | 360° | 360° | 360° | 360° |
Overall height | 138 | 225 | 235 | 280 |
Net Weight | 4 | 12 | 20 | 35 |
study and accurately made machine vices from close grained casting & jaws are made of special steel properly hardened
* vice can be converted from swivel base to fix by removing the base & accuracy in parallelism is 0.02/100mm.
* flatness of bed 0.02/100mm, fine acme thread screw & the swivel base is graduated fully thought 360
* crank handle is made of all steel providing loaded mechanism providing positive grip
Size in mm | 75 | 100 | 150 | 200 | 250 | 300 |
---|---|---|---|---|---|---|
Size in Inch | 3 | 4 | 6 | 8 | 10 | 12 |
Jaw width | 75 | 100 | 150 | 200 | 250 | 300 |
Jaw opening | 75 | 100 | 150 | 200 | 250 | 300 |
Jaw depth | 30 | 38 | 48 | 60 | 75 | 75 |
Overall height | 275 | 310 | 440 | 475 | 720 | 810 |
Height (F/B) | 70 | 80 | 100 | 115 | 130 | 135 |
Height (S/B) | 90 | 110 | 140 | 165 | 180 | 190 |
Weight (F/B) | 7 | 12 | 28 | 55 | 100 | 120 |
Weight (S/B) | 10 | 16 | 38 |
70 |
130 | 150 |
* All Vices sufaces are precision ground & The movable jaw is slightly narrow than the base enabling the vices to be used on either sides in addition to the base.
* Clamping and releasing is through a threaded spindle with precision cut square threads for smooth operation.
Size in mm | 75 | 100 | 150 |
---|---|---|---|
Width of Jaws | 76 | 95 | 150 |
Depth of Jaws | 40 | 45 | 50 |
Opening of Jaws | 82 | 105 | 175 |
Length Overall | 200 | 235 | 250 |
Height Overall | 70 | 90 | 100 |
Weight in Kgs. | 5 | 10 | 13 |
* Manufacturing from special alloy steel, these solid sine vices are fully hardened (55 to 60 HRC) and tempered, mounted on to a precision hinges bottom plate.
* All Surface of the vice are precissional ground for maximum accuracy
* These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles.
* Very small angles to be set with easy using standard gauge blocks.
Size in mm | 75 |
---|---|
Size in Inch | 3 |
Jaw width | 75 |
Jaw opening | 85 |
Jaw depth | 40 |
Overall Height | 100 |
Overall Length | 205 |
* Accuracy in parallelism & squareness within 0.02/100 mm
* Ductile cast iron body & Hardened bed and jaws maintain accuracy for long time
* Sealed bearing system reduces clamping pressure & increase bearing life
* High clamping force can be achieve by effortless handle movement which eliminates hammering on handle
* No work piece tilt after clamping
* All parts interchangeable and available as spares
Size in mm | 100 | 150 | 200 |
---|---|---|---|
Jaw width | 110 | 160 | 210 |
Jaw opening | 105 | 155 | 250 |
Max. Jaw opening RJ | 270 | 365 | 480 |
Jaw depth | 37 | 48 | 60 |
Overall Length | 330 | 420 | 575 |
Overall Height | 95 | 115 | 145 |
Weight in kgs | 15 | 30 | 60 |
* Accuracy in parallelism & squareness within 0.02/100mm
* Ductile cast iron body & hardened bed and jaws maintain accuracy for long time.
* Sealed bearing system reduces clamping pressure & incerease bearing life.
* High clamping force can be achieve by effortless handle movement which eliminates hammering on handle *No work piece tilt after clamping
*All parts interchangeable and available as spares.
Size in mm | 100 | 150 | 200 |
---|---|---|---|
Jaw Width | 110 | 160 | 210 |
Jaw opening | 105 | 155 | 250 |
Max.Jaw opening RJ | 270 | 365 | 480 |
Jaw Depth | 37 | 48 | 60 |
Overall Lenght | 330 | 420 | 575 |
Overall height | 135 | 160 | 190 |
Weight in Kgs | 18 | 35 | 65 |
v-slide motion with prismatic guide for adjustment
* water channel with body on all sides for coolant so that machine doesn't get wet
* manufactured to consistent accuracy to give prolonged reliable service.
* totally enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
Size in mm | 110 | 160 | 200 |
---|---|---|---|
Width of Jaw | 110 | 160 | 200 |
Opening of Jaw | 110 | 160 | 200 |
Weight in kgs | 15 | 29 | 50 |
* Body - Availabe in CI Cast and SG Iron steel
* Jaws - Alloy Steel Hardened and tempered grinded
* Model - Parallel four bolts in swivel base
* Finish - Powder Coated
Size in mm | 150 |
---|---|
Width of Jaw | 150 |
Opening of Jaw | 150 |
Weight in kgs | 23 |
* Manufactured from close grained cast iron.* V-Grooved provided in stable jaws to ensure firm gripping of round jaws
Size in mm | 80 | 100 |
---|---|---|
Size in inches | 3.5 | 4 |
Width of Jaws | 80 | 100 |
Opening of Jaws | 80 | 100 |
Weight in kgs |
* Semi Steel unbreakable body & Jaws Alloy Steel Seratted fitted with L-Key Bolts
* Double anvil corner to corner square beam, heavy Horn for more opening
* Thrust System in back for better alignment and box nut locked for long life working
Size in mm | 75 | 85 | 100 | 125 | 150 |
---|---|---|---|---|---|
Width of Jaws | 75 | 85 | 100 | 125 | 150 |
Opening of Jaws | 75 | 100 | 110 | 135 | 160 |
Depth of Jaws | 45 | 70 | 75 | 85 | 90 |
Weight in Kgs. | 4 | 9.5 | 13 | 20 | 25 |
For Holding components at any angle between 0 to 60 degrees.
* Rapid setting with protractor scale (0 -60)
* Angle rigidly held with single strap clamp.
Size in mm | 65 | 75 |
---|---|---|
Size of Table | 65 | 75 |
Height Overall | 85 | 100 |
Width Overall | 90 | 105 |
Weight in Kgs. | 4 | 6 |
* Pipe Vices are designed to endure the heaviest pipe work fitted with long jaws these vices will hold pipes firmly without any crushing or bending
* The base is provided with four bolt holes to facilitate fasterning to bench or post.
Size in mm | 35 | 50 | 75 | 100 | 150 | 200 |
---|---|---|---|---|---|---|
Pipe Dia Capacity Min | 3 | 7 | 7 | 10 | 50 | 50 |
Pipe Dia Capacity Max | 30 | 50 | 75 | 100 | 150 | 200 |
Weight in Kgs. (CI Cast) | 5 | 8 | 14 | 18 | 44 | 92 |
Weight in Kgs. (SG Cast) | ... | 6.5 | 11 | 15 | ... | ... |
BENCH VICE (Fixed Base) DOUBLE RIBBEDwith Large anvil & Malleable Cast Nut
Semi Steel unbreakable body & Jaws Alloy Steel Seratted fitted with L-Key Bolts
* Double anvil corner to corner square beam, heavy Horn for more opening
* Thrust System in back for better alignment and box nut locked for long life working
Size in mm | 75 | 85 | 100 | 125 | 150 |
---|---|---|---|---|---|
Width of Jaws | 75 | 85 | 100 | 125 | 150 |
Opening of Jaws | 75 | 100 | 110 | 135 | 160 |
Depth of Jaws | 45 | 70 | 75 | 85 | 90 |
Weight in Kgs. | 4 | 9.5 | 13 | 20 | 25 |
BENCH VICE (Swivel Base) DOUBLE RIBBEDwith Large anvil & Malleable Cast Nut
Semi Steel unbreakable body & Jaws Alloy Steel Seratted fitted with L-Key Bolts
* Double anvil corner to corner square beam, heavy Horn for more opening
* Thrust System in back for better alignment and box nut locked for long life working
Size in mm | 100 | 125 | 150 |
---|---|---|---|
Width of Jaws | 100 | 125 | 150 |
Opening of Jaws | 110 | 135 | 160 |
Depth of Jaws | 75 | 85 | 90 |
Weight in Kgs. | 18 | 25 | 30 |
BENCH VICE-HEAVY DUTY(Fixed Base) IS:2586
Double Ribbed with large anvil & Heavy Horn
Semi Steel unbreakable body & Jaws Alloy Steel Seratted fitted with L-Key bolts
* Double anvil corner to corner square beam, heavy Horn for more opening
* Thrust System in back for better alignment and box nut locked for long life working
Size in mm | 100 | 125 | 150 | 200 | 250 | 300 |
---|---|---|---|---|---|---|
Width of Jaws | 100 | 125 | 150 | 200 | 250 | 300 |
Opening of Jaws | 110 | 135 | 160 | 210 | 260 | 310 |
Depth of Jaws | 75 | 85 | 90 | 100 | 110 | 120 |
Weight in Kgs. | 17 | 22 | 29 | 40 | 50 | 55 |
Double Anvil (Square & Round)
* Double Jaws (Flat Seratted & Round Jaws)
* Double Ribs (Corner to Corner - Broached)
Size in mm | 100 | 125 | 150 |
---|---|---|---|
Width of Jaws | 100 | 125 | 150 |
Opening of Jaws | 100 | 125 | 150 |
Weight in Kgs. | 7.5 | 11.75 | 14.5 |
Body - Available in CI Cast and SG Iron Steel
* Jaws - Alloy Steel Hardened and tempered Seratted jaws
* Model - Single rib without Anvil
* Finish - Powder Coated
Size in mm | 100 | 125 | 150 | 200 |
---|---|---|---|---|
Width of Jaws | 100 | 125 | 150 | 200 |
Opening of Jaws | 100 | 125 | 150 | 200 |
Weight in Kgs. | 14 | 23 | 33 | 40 |
BENCH VICE (Fixed Base) Square Beam, Double Anvil (Square & Round) Double Jaws (Flat Serrated & Pipe Jaws)
Body - Available in SG Iron Steel
* Jaws - Alloy Steel Hardened and tempered Seratted jaws
& Inbuilt Pipe jaws * Model - Square beam all side machine so no shakes in the moving slide
* Finish - Powder Coated
Size in mm | 100 | 125 | 150 | 200 |
---|---|---|---|---|
Width of Jaws | 100 | 125 | 150 | 200 |
Opening of Jaws | 100 | 125 | 150 | 200 |
Weight in Kgs. | 8 | 9.7 | 14.5 | 19 |
Body - Available in CI Cast and SG Iron Steel
* Jaws - Alloy Steel Hardened and tempered Seratted
* Model - Double rib with small Anvil
* Finish - Powder Coated
Size in mm | 75 | 100 | 125 | 150 | 200 |
---|---|---|---|---|---|
Width of Jaws | 75 | 100 | 125 | 150 | 200 |
Opening of Jaws | 75 | 100 | 125 | 150 | 200 |
Weight in Kgs. | 4.5 | 7 | 12 | 15 | 18 |
Body - Available in CI Cast and SG Iron Steel with Swivel Base
* Jaws - Alloy Steel Hardened and tempered Seratted
* Model - Cross ribs with small Anvil
* Finish - Powder Coated
Size in mm | 75 | 100 | 125 | 150 | 200 | 250 | 300 |
---|---|---|---|---|---|---|---|
Width of Jaws | 75 | 100 | 125 | 150 | 200 | 250 | 300 |
Opening of Jaws | 75 | 100 | 125 | 150 | 200 | 250 | 300 |
Weight in Kgs. | 7 | 11.5 | 16.5 | 21 | 33.5 | 58 | 69 |
Body - Unbreakable ductile cast iron body
* Jaws - Carbon steel hardened & serrated to ensure a fast non slip
* Model - Fully CNC machined on all bearing surfaces for smooth and trouble free operations
* Fine acme thread screw
* Finish - Powder Coated
Size in mm | 75 | 100 | 125 | 150 | 200 |
---|---|---|---|---|---|
Width of Jaws | 75 | 100 | 125 | 150 | 200 |
Weight in Kgs. | 9 | 15 | 21 | 35 | 55 |
BENCH VICE - Square Beam-Round Anvil (Fixed / Swivel Base)
Body - Unbreakable ductile cast iron body
* Jaws - Carbon steel hardened & serrated to ensure a fast non slip
* Model - Square beam with Round Anvil
* Finish - Powder Coated
Size in mm | 100 | 125 | 150 |
---|---|---|---|
Width of Jaws | 100 | 125 | 150 |
Opening of Jaws | 100 | 120 | 140 |
Weight in Kgs. (F/B) | 10 | 14 | 16 |
Weight in Kgs. (S/B) | 11 | 16 | 18 |
Body - Available in SG Iron Steel
* Jaws - Alloy Steel Hardened and tempered Seratted
* Model - Double ribs with small Anvil
* Finish - Powder Coated
Size in mm | 75 | 100 | 125 | 150 | 200 |
---|---|---|---|---|---|
Width of Jaws | 75 | 100 | 125 | 150 | 200 |
Weight in Kgs. (F/B) | 4.5 | 6.7 | 8.7 | 11 | 15.5 |
Weight in Kgs. (S/B) | 5.2 | 7.4 | 9.5 | 12 | 16.5 |
Ideal for Home, Shop and Contractor use 5" Jaw width heavy reinforced 4 lug Base Permanent Pipe Jaws Replaceble Hardened Steel Jaw Faces
* Extra Strong Machined Spindle and Handle Spindle Guard protects against dirt & Chips Permanent pipe Jaws Base Swivels 270 Degrees Hardened Steel Replaceable Jaw
Size in mm | 125 |
---|---|
Size in inch | 5 |
Width of Jaws | 125 |
Opening of Jaws | 100 |
Weight in Kgs. | 10 |
* Body - Available in SG Iron Steel
* Jaws - Alloy Steel Hardened and tempered Seratted
* Model - Rear Jaw Sliding with inbuilt screw
* Finish - Powder Coated
Size in mm | 100 | 125 | 150 |
---|---|---|---|
Size in inch | 4 | 5 | 6 |
Weight in Kgs. | 10.5 | 14 | 18 |
* Manufactured from High Tensile Steel Plate
* Swivel Base provides flexibility for locking at any desired angle by its low profile 360
* Ideal for Machinist or Craftsmen.
Size in mm | 75 | 100 | 125 | 150 | 200 |
---|---|---|---|---|---|
Size in inch | 3" | 4" | 5" | 6" | 8" |
Width of Jaws | 75 | 100 | 125 | 150 | 200 |
Weight in Kgs. (F/B) | 3.5 | 6 | 9.5 | 10 | 15.5 |
Weight in Kgs. (S/B) | 4.5 | 7 | 11 | 12.5 | 18.5 |
Manufactured from High Tensile Steel Plate
* Square base with four holes for fitting on table
* Inbuilt groove in moveable slide for better accuracy
* A-Down Groove in slide
* B-Over groove in slide
Size in mm | 100 | 125 | 150 | 200 |
---|---|---|---|---|
Width of Jaws | 100 | 125 | 150 | 200 |
Opening of Jaws | 120 | 150 | 200 | 250 |
Weight in Kgs. | 6 | 18 | 37 | 43 |
* Pipe Vices are designed to endure the heaviest pipe work fitted with long jaws these vices will hold pipes firmly without any crushing or bending* The base is provided with four bolt holes to facilitate fasterning to bench or post.
Size in mm | 35 | 50 | 75 | 100 | 150 | 200 |
---|---|---|---|---|---|---|
Pipe Dia Capacity Min | 3 | 7 | 7 | 10 | 50 | 50 |
Pipe Dia Capacity Max | 30 | 50 | 75 | 100 | 150 | 200 |
Weight in Kgs. (CI Cast) | 5 | 8 | 14 | 18 | 44 | 92 |
Weight in Kgs. (SG Cast) | ... | 6.5 | 11 | 15 | ... | ... |
Hinged Pipe vice so called because the frame (Containing the main scew and top jaw) and the base are hinged together.
* To grip a pipe the frame is hinged back pipe located on the lower jaw. When the frame is hinged own a locking hook automatically engages into the side of the base holding the vice firmly shut. Ideal for fast repetitice work.
Pipe Dia Capacity (mm) | 40 | 50 | 60 | 65 | 115 | 150 |
---|---|---|---|---|---|---|
Pipe Dia Capacity (inches) | 1.½ | 2 | 2.½ | 3.½ | 4.½ | 6 |
Weight in Kgs. | 2.7 | 1.4 | 5.7 | 7 | 11 | 21 |
The Moveable jaw is running into square & round steel bars
* All steel body replaceable accurately machined
* Hardened & tempered jaws.
Pipe Dia Capacity (mm) | 40 | 50 | 75 | 100 | 150 |
---|---|---|---|---|---|
Pipe Dia Capacity (inches) | 1.½ | 2 | 3 | 4 | 5 |
Weight in Kgs. (Sq/P) | 2 | 3.6 | 6 | 7.2 | 10 |
Weight in Kgs. (Rd/P) | 4.5 | 5.3 | 10 | 20 | ... |
If the main feature of the hinged vice is speed of operation, the feature which distinguishes the chain vices is very powerful grip. The Pipe rests on a "V" formed by two sets of forged heat treated steel jaws.
* The high tensile steel chain is then looped over the pipe, locked into a slot between the jaws and tensioned by a handle and screw; a strong rigid three-point location which renders the pipe movable.
* Compact and easy to store away.
Pipe Dia Capacity (mm) | 50 | 75 | 100 | 150 | 200 |
---|---|---|---|---|---|
Pipe Dia Capacity (inches) | 2 | 3 | 4 | 6 | 8 |
Weight in Kgs. | 1.7 | 2.5 | 4.1 | 8.4 | 10.5 |
Accuraterly machined housing assure smooth sliding movement.
* Square body seating provides easy fitment under the bench top so that jaws are flush with the bench top.
* Body and sliding jaw have provision for attaching wooden liners to protect the vice, work piece and working tools.
* Vice jaws equipped with a "TOE-IN" feature. When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
Size in mm | 150 | 175 | 200 | 225 |
---|---|---|---|---|
Width of Jaws | 150 | 175 | 200 | 225 |
Opening of Jaws | 180 | 230 | 260 | 330 |
Weight in Kgs. | 4.6 | 8.1 | 10.5 | 15.3 |
Wood Working Vice with Cleamping inbuilt in body
* A very useful feature in repetitive work situations
* Easy to handle for outdoor work
Continuous Scew giving powerful grip on work.
* No Lifting of the sliding jaw.
* Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.
Size in mm | 75 | 100 | 150 |
---|---|---|---|
Size in inch | 3 | 4 | 6 |
Width of Jaws | 75 | 100 | 150 |
Opening of Jaws | 75 | 100 | 150 |
Weight in Kgs. | 5 | 8 | 16 |
Continuous Screw giving powerful grip on work.
* No Lifting of the sliding jaw.
* Jaws fitted from outer side of Body
* Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.
Size in mm | 75 | 100 | 125 | 150 |
---|---|---|---|---|
Size in inch | 3 | 4 | 5 | 6 |
Width of Jaws | 75 | 100 | 125 | 150 |
Opening of Jaws | 75 | 100 | 125 | 150 |
Weight in Kgs. | 2.5 | 5 | 9 | 11 |
* With integrated clamp which permits easy filling to work on bench or table* Craftsman's Vices* Ideal for use by Watch Makers Gold smiths model makers and Dye Enthusiasts for any light duty jobs
Size in mm | 25 | 40 | 50 | 60 | 70 | 100 |
---|---|---|---|---|---|---|
Size in inch | 1 | 1.5/8 | 2 | 2.3/8 | 3 | 4 |
Width of Jaws | 25 | 40 | 50 | 60 | 70 | 100 |
Weight in Kgs. | 0.520 | 0.570 | 0.750 | 0.960 | 1.250 | 1.5 |
Sturdy and accurately made machine vice from graded cast iron.
* Jaws are made of special tool properly hardened.
* Vice can be converted from swivel base to fix by removing the base.
* Crank handle is made of unbreakable ductile iron steel providing loaded mechanism providing positive grip.
* Fine Acme thread scew & the Swivel base is graduated fully through 360
* Quick alignment to machines through longitude slot provided in base.
Size in mm | 100 | 125 | 150 |
---|---|---|---|
Size in Inch | 4 | 5 | 6 |
Jaw width | 100 | 125 | 150 |
Jaw opening | 100 | 125 | 150 |
Jaw depth | 38 | 46 | 48 |
Swivel Range | 360° | 360° | 360° |
The rapid positioning notches allow the vice to be locked in any position by means on an alien key provided with the vice.
* Vee grooves in the sliding jaw, both horizontal and vertical, facilitate holding of round jobs, Jaw pressure and downward for repeatable positioning and maximum holding power.
* All vices surfaces are precision ground.
Size in mm | 50 | 75 | 100 | 150 |
---|---|---|---|---|
Size in Inch | 2 | 3 | 4 | 6 |
Jaw width | 50 | 75 | 100 | 150 |
Jaw opening | 90 | 110 | 125 | 150 |
Jaw depth | 25 | 35 | 45 | 50 |
Weight in kgs | 2.0 | 3.5 | 6.0 | 12.0 |
Manufacturing from special alloy steel, these solid sine vices are fully hardened (55 to 60 HRC) and tempered, mounted on to a precision hinges bottom plate.
* All Surface of the vice are precissional ground for maximum accuracy
* These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles.
* Very small angles to be set with easy using standard gauge blocks.
Manufacturing from speciall alloy steel, these solid sine vices are fully hardened (55 to 60 HRC) and tempered, mounted on to a precision hinges bottom plate.
* All surface of the vice are precessional ground for maximum accuracy.
* These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles
* Very small angles to be set with using standard gauge blocks.
Accuracy in parallelism & squareness within 0.02/100 mm
* Ductile cast iron body & Hardened bed and jaws maintain accuracy for long time
* Sealed bearing system reduces clamping pressure & increase bearing life
* High clamping force can be achieve by effortless handle movement which eliminates hammering on handle
* No work piece tilt after clamping
* All parts interchangeable and available as spares
Size in mm | 100 | 150 | 200 |
---|---|---|---|
Jaw width | 110 | 160 | 210 |
Jaw opening | 105 | 155 | 250 |
Max. Jaw opening RJ | 270 | 365 | 480 |
Jaw depth | 37 | 48 | 60 |
Overall Length | 330 | 420 | 575 |
Overall Height | 95 | 115 | 145 |
Weight in kgs | 15 | 30 | 60 |