Hexacon Enterprise

Vatva, Ahmedabad, Gujarat

APPLICATION

The belt conveyor wing pulley is known as self-cleaning pulleys. These wings serve several purposes, including improving belt tracking, reducing material spillage, and enhancing overall conveyor system efficiency. It has the ability of belt tracking and self-cleaning, and it can reduce material spillage.

Like other types of conveyor pulleys, wing pulleys may be equipped with lagging material on the surface to improve traction between the pulley and the belt. It is widely used in Aggregate & Cement, Mining, Paper & Forest, Power Generation, Unit & Baggage Handling, etc.

FEATURES

Winged Tail Pulley

Mine duty and quarry duty and heavy duty pulleys provide effective self-cleaning action reducing material build-up. The duty construction reduces the possibility of metal fatigue and enhances the dependability of the pulley. Ideally suited for harsh application and abrasive conditions.

DIAMETER: 6” – 60”(152mm – 1524mm); FACE WIDTH: 12” – 78”(305mm – 1980mm); It is Customizable.

Spiral Wing Pulley

Available in crow spiral wing pulleys are formed by winding flat bar spirally from the center of a wing pulley to the outside ends. This continuous belt contact design eliminates excessive noise and vibration, while still providing a cleaning effect and allowing a path for debris to escape rather than being trapped between the pulley and belt. n or Flat Face.

Diameter: 12" – 60"; FACE WIDTH: 12" – 75"; It is Customizable.

Chevron Wing Pulley

Before the chevron pulley, traditional wing pulley designs were notorious for trapping rocks, gathering fugitive material and bending prematurely.Chevron Wing Pulleys reject and repel any incoming fugitive material, which significantly extends the operating life of your conveyor and many of its components.

DIAMETER: 10” - 42”; FACE WIDTH: 12” - 75”; It can be tail and gravity take-up; It is Customizable.

Herringbone Wing Pulley

Herringbone wing pulley was designed for those applications where conventional wings suffer from excessive material lodging and wing folding. The extreme wing angles of up to 45 degrees, use the rotation of the pulley to eject material out the sides of the pulley rather than recirculating it as a conventional wing often does.

DIAMETER: 12” - 60”; FACE WIDTH: 12” - 78”; This is a precision pulley. It is Customizable.

Belt Conveyor Wing Pulleys Specification

Standard You can get DIN/ AFNOR/ FEM/ ASTM/ CEMA standard wing pulleys from our company.

DIA. 6"-60", 152-1524mm

FACE WIDTH 12"-102", 305-2590mm

Types 1. Mine Duty Wing Pulley,

2. Heavy Duty Wing Pulley,

3. Wing Tail Pulley,

4. Spiral Wing Pulley,

5. Chevron Wing Pulley,

6. Herringbone Wing Pulleys.

Customizable When selecting a conveyor wing pulley, factors such as the type of material being conveyed, belt width, load capacity, and environmental conditions should be considered.

Conveyor Drive Pulley Drive Drum Pulley for Belt Conveyor

A conveyor drive pulley, also known as a head or drive drum, is a key component of a belt conveyor drive system. The drive pulley is connected to the motor, usually through a gearbox, and provides the necessary torque to move the conveyor belt. We offer conveyor drive pulleys or complete drive system.

APPLICATION

The conveyor drive pulley is typically located at the discharge end of the conveyor system, opposite the tail pulley. The primary function of the drive pulley is to transmit power from the motor to the conveyor belt, causing it to move and transport materials along the conveyor. It can be used in many industries such as:

aggregate & sand production,

mining & mineral processing,

food processing,

warehousing,

manufacturing

logistics applications.

FEATURES

High Power Transmission

The motor, often connected to our drive pulley through a gearbox, provides the necessary power to drive the conveyor belt. The drive pulley transforms this power into rotational motion, moving the belt.

Steel Shell With Materials Lagged

Conveyor drive pulleys are usually constructed from steel. The outer surface of the pulley, where the conveyor belt makes contact, may be lagged with rubber or other materials to provide better traction and reduce wear.

Robust Enough Shaft Design

The design of the shaft on which the drive pulley is mounted is important. It must be robust enough to handle the loads and forces exerted by the conveyor system.

Torque Limiting Devices Available

Some conveyor drive pulleys may include torque limiting devices to protect the system from overloads. These devices can prevent damage to the motor and gearbox by limiting the torque transmitted to the conveyor belt.

Safety Considerations

Safety guarding is essential for drive pulleys to prevent accidental contact with moving parts. Guards should be installed to protect personnel from potential hazards.

Belt Conveyor Drive Pulley

Belt Width 500-2800mm (19-110.2 inch)

Pulley Length 500-3200mm (19-125.9 inch)

Diameter 200-1800mm (7.8-70.8 inch)

Standard ISO9001:2008, CEMA, DIN, TUV, JIS, AS/NS, etc.

Working Life More than 30, 000 hours.

Surface Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.

Main Material Carbon Steel Shell

Length of conveyor drive pulley depends on the width of conveyor Belt. You can get drive pulleys with hot & cold vulcanized rubber lagging, plain or grooved, as required by client.