Our Products
We offer the best product range of Online PH Transmitter.
Technical Specifications
| Range | pH | -2.00 to 16.00 pH | ORP | -2000 to 2000 mV | Temperature | -30 to 130.0oC |
| Resolution | pH | 0.01 pH | ORP | 1 mV | Temperature | 0.1oC (above -10 oC); 1oC (below -10oC) |
| Accuracy @ 20oC | pH | 0.02 pH | ORP | 2 mV | Temperature | 0.5oC (-9.9 to 130.0oC); 1oC (-30 to -10oC) |
| Input Impedance | 1012 Ohm | |
| Digital Inputfor the pH/ORP/oCTransmitter | RS485 | |
| Other DigitalInsulated Inputs | two digital insulated inputs: one for hold and one for the advanced cleaning; ON state: 5 to 24 VDC | |
| Digital InsulatedOutput | a digital insulated contact closed upon hold mode | |
| TemperatureCompensation | automatic or manual, -30 to 130oC | |
| Temperature Probe | with three-wire or two-wire Pt100/Pt1000 sensor (with automatic recognition and damage test) | |
| Power Supply | 24 VDC/AC, 115 VAC 10%, 230 VAC 10% or 100 VAC 10%; 50/60 Hz | |
| Power Consumption | 10 VA | |
| Over Current Protection | 400 mA 250V quick blow fuse | |
| Max. OscillationFrequency | 8 MHz | |
| Relays 1, 2, 3, 4 | electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A - 30 VDC (resistive load); fuse protected: 5A, 250V quick blow fuse | |
| Alarm Relay | electromechanical relay SPDT contact output, 5A - 250 VAC, 5A - 30 VDC (resistive load) fuse protected: 5A, 250V quick blow fuse | |
| Analog Output | two independent outputs, 0 - 22 mA (configuring as 0-20 mA or 4-20 mA) | |
| Analog OutputResolution | 0.1% f.s. | |
| Analog OutputAccuracy | 2% f.s. | |
| Data Logging | 6000 pH/oC or ORP samples | |
| Environment | 0 to 50oC?(32 to 122oF); RH max 85% non-condensing | |
| Casing | IP20 (housing); IP54 (front panel) | |