Our Products
Dunnage Bagalso known as airbags, air cushions and inflatable bags are used to secure and stabilize cargo.Dunnage airbags consist of closed chambers made from an elstic film or PP and paper combination filled with air.When at rest, only the static load generated by the weight of the package contents bears upon the cushioning.When dynamic loads occur, these are absorbed by compression of the cushion.
PRODUCT TYPESPaper dunnage bags are made out of two components, an inner component that consists of a polyethylene inner bag, the outer component is a paper bag. The outer bag is made of the highest quality, light weight kraft paper of high tensile strength. Paper dunnage bags come in different strengths and varieties and can be made in any special size. The inner component provides optimum pressure and the outer component provides optimum strength. For use in the chemical industry paper dunnage bags can be polycoated. A polycoat will make the dunnage bag resistant to specific chemicals
Woven Polypropylene bags are extremely durable and can be used in dry and wet conditions.These bags are best for extreme heavy loads.Poly woven airbags have greater elasticity than Kraft paper dunnage airbags for more surface contact with the pallets. Poly woven airbags woven material provides greater tear strength, and superior moisture resistance than most other dunnage bag materials. Poly woven airbags typically have greater reuse opportunities, due to the durability of the woven material, and are recyclable.
The paper used on the outside of the bag is laminated on the inside with a woven polypropylene layer, which allows higher resistance to punctures and moisture
Desiccantis a drying agent used to lower the moisture content of air inside a closed space, such as Moisture Barrier Bag.
Desiccantis packaged in fractional units in order to facilitate its usage with a variety of bag sizes.
In order to provide a complete moisture barrier packaging assembly, desiccant must be inserted into the bag, prior to having the bag vacuum sealed. The recommended amount ofdesiccantis dependent on the interior
volume of the packaging, the weather conditions while packaging and the required packaging life of the material as well as the transportation mode.For castings, forgings, machined components where the items are not individually packed the required amount ofdesiccantfor exports may be around 10-15 pouches ofVCI 19000 desiccant (50 gmpouch).
APPLICATION METHOD
Place in vicinity of components or packaging to be protected.
TYPICAL APPLICATIONS
VCI 19000 Desiccantcan be effectively used for:
Use of gloves while handling the components as well as immediate packaging is important. In case the components carry cutting oils or water from previous processes, dewatering with CL005 is recommended.
FEATURES
Additional Information:
Payment Terms :
Packaging Details : Advance payemnt
Standard Box to purchase
Delivery Time : 15 days
Tuffpaulinis a special type oftarpaulin. Atarpaulinis a material which has been designed to be treated to be waterproof or water resistant.Tarpaulinsare used in a large range of applications for everything from providing shelter from inclement weather to protecting flooring from paint drips. It is sold in hardware stores selltarpaulinsor tarps as they are sometimes called, and it is also possible to purchase large sheets oftarpaulinmaterial and cut them down into a specific desired size.
A typicaltarpaulinis very thick and heavyweight, that resists high air, winds and airborne objects.Tarpaulinsare produced in a woven pattern, that makes them rough and stiff to the touch. They also typically have thicker folded and sealed edges witheyelets, making it possible for people to run rope and hence thetarpaulincan be tied it to various objects.Tarpsare available in many colour options like bright colors like blue and orange, which makes them very easy to spot.
Physical Properties | Test Method | |
Colour | Visual | Blue, White, Yellow, Green |
Thickness Availability | Micrometer | 100, 150, 200, 250, 300 gsm |
Specific Gravity | ASTM D 1298 | 0.92 |
Surface pH | 9 | |
VCI Test (VIA) | Pass | |
Salt Spray in VCI | ASTM B 117 | 1000 hrs + |
Tensile Strength (100 gsm film) | MD/CD | 18/17 MPa |
Dart Impact Strength (100 gsm film) | ASTM 1709-09 | 300 gf |
Elongation | 450% |
VCI Masterbatchmanufactured byRustXis the most advanced corrosion protectionMasterbatchforVCI filmmanufacturing
It is a nitrite freeVCI Masterbatchthere is impregnated with specialisedVCI chemicalsfor corrosion protection of metals and nonmetals and is a multimetal product. This is based on SMP technology which stands for speedy moisture passivation in which 20% of the VCI is released within six hours of opening theVCI filmbag and remaining 80% over a period of 15 years.
VCI vapours are released over period of time which react with moisture or water molecules and neutralise them so where ever they settle on the metal part The new molecule is neutral to corrosion. A PH value of 8 to 9 is maintained in the packaging hence inhibiting any corrosion of the parts as the corrosion can only take place where there is high moisture or Acidic content in the packaging
It is very easy to extruded the film in most extruders using rest XVCI masterbatch. The product is reach approved, ROHS compliant, TRGS615 compliant, heavy metals free, nitrite free and does not have a very strong odour.
The resin is clear and when extruded with LDPE, Hdpe or PP and does not release any gasses during the manufacturing and does not believe any residue in the extras in machine or on the rollers, die, screw, barrel or airings.
How to testVCIquality and performance?
VCI masterbatchcan be validated using a very simple test where a few drops of water can be put inRustXwith a steel blade and on the other side in a normal plastic bag with a few drops of water and a steel blade.
What you shall notice is that there would be corrosion in the normal bag within a few minutes to a few hours and the rustics we see a film will not have corrosion even four years with doors few drops of water inside the bag.
Additional Information:
Payment Terms : L/C
Delivery Time : 15 days
RustXFusion Fabric Paperis a woven fabric made on circular knitting machines from specializedhigh strengthHDPE resinwith dosages of UV protection and optical brighteners made fromVirgin polymers
The fabric is woven on automatic lines to ensure adequate strength is achieved by a Warp andWeft structure of the material.VCI Fusion Fabric Paperby its name is symbolic to not just theadvantage of High Strength but also excellent moisture penetrations properties and oxygentransmissions.
It is laminated on both sides with Poly Ethylene of approx 20 gsm-25 gsm on each side with a hotlamination process and cannot be easily peeled off nd then is laminated with VCI PaperAdditives
RustX Additives areREACH ApprovedandROHS Compliant. All additives are produced undersupervision of chemists.
TheHTIprovides packaging solutions for themetal coilindustry. Our commitment to the industry has resulted in the development of innovative, cost efficient products that address problems like loose, irregular packaging. Our sales, equipment service, customer service and engineering departments can help you design the optimum protective packaging system for your application. To learn more aboutHTIcoil wrapping machine for steel coil, please check the following information
HTI-Sseries is steel coil wrapping machinewhich mainly used tosteel coil, steel strip packaging, slit strip.with highly efficiency and nice packaging for saving labor and material cost. The packaging is with eye crossing wrapping, which allow steel coil a nice, firm for dustproof, waterproof.
Features:
1.PLC & HMI for automatic operation.
2.Special system for easy loading and unloading.
3.Manual and automatic working mode for easy operation.
4. The converter is adopted to adjust the speed of the ring and rollers
5. Overlap of the packing tape according to requirement.
6.Automatic material cutting.
7.Guardrails, soft starts and stop for safety operation.
8.Height of the ring could be adjusted for different OD of the coil
9.Packaging tension is adjustable by special breaker.
10.The rollers are wrapped by polyurethane for protect the surface of the coils.
11.Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.
12.Special brake for the tape release device to avoid material folding.
13. Widely packing material applicable.
HTI-400 | HTI-400 | HTI-500 | HTI-600 | HTI-800 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||||
Power (KW) | 1.5 | 2.2 | 4.0 | 6.0 | 8.0 |
Steel coil ID(mm) | >300 | >300 | >400 | >500 | >500 |
Steel coil OD(mm) | 600-900 | 800-1000 | 800-1200 | 800-1400 | 800-1600 |
Steel coil width(mm) | 20-300 | 50-400 | 50-500 | 50-600 | 50-800 |
Steel coil Weight(Kg) | <300 | <1000 | <2000 | <4000 | <5000 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||||
Ring speed(r) | 30-80 | 30-80 | 30-70 | 30-60 | 30-60 |
Wrapping speed | 30-40sec/pcs | 35-45sec/pcs | 40-50sec/pce | 40-55sec/pcs | 50-60sec/pcs |
Overlapping rate | 20-80% | ||||
Air supply. | 5-7kgf/ c㎡ |
HTI-F series rod wrapping machine/spiral wrapper is mainly used to packaging ofsteel rods, copper rod, profile., which is with highly efficiency and nice packaging for saving labor and material cost.
FEATURES:1. PLC & HMI for automatic operation with can be connected with production line.
2. Widely packing material applicable.
3. Manual and automatic working mode for easy operation.
4. The converter is adopted to adjust the speed of the ring and rollers.
5. Overlap of the packing tape according to requirement.
6. Packaging tension is adjustable by special breaker.
7. Guardrails, soft starts and stop for safety operation.
8.Central positioning for the best packaging
9. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.
HTI-F100 | HTI-F200 | HTI-F300 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||
Power (KW) | 1.5 | 2.8 | 6.5 |
OD(mm) | 50-300 | 100-600 | 200-800 |
Length(mm) | 1200-4000 | 2000-6000 | 2000-6000 |
Weight(Kg) | 50-300 | 100-1000 | 100-4000 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||
Ring speed(r/min) | 30-80 | 30-70 | 30-60 |
Wrapping speed | 2-12m/min | 2-10m/min | 2-9m/min |
Overlapping rate | 20-80% |
VCI sheetsandrollsare available in various sizesand can be used for wrapping large or small componentsor equipments and for covering corrugation/ honeycomb layers.
Thickness | 50 to 500 microns |
Tube Sizes | 2" to 200"tube |
Sheet size | Any |
Colour | Blue/Yellow/Transparent |
Printing | Upto 8 Colours |
Aluminium barrier foilsare a perfect combinations to reduce moisture penetration inside the packaging and provide shelf life of upto 15 years. It has extremely low water and oxygen transmission rates . It can be vacuum and heat sealed and the inner layer of thealuminium foilcan haveVCI protectionto protection corrosion of metals.
Additional Information:
Payment Terms :
Additional Information:
Packaging Details : ROLL, SHEET, OR BAG (2D, 3D)
Delivery Time : 7-10 DAYS
Collar Hinge Pallet boxesoffer a very convenient solution for economic, reusable and globally recyclable system of packaging for automotive and electronic components. The pallet can be assembled and disassembled in layer and provides easy placement of parts which have to be placed in different layer as well as easy removability during use or and assembly lines.
These are availlable in different standard and custom sizes to suit customer requirements. Dividers and partitions are also available to allow different layers and separations between components to prevent collision of parts during sea or land transportation.
Shrink filmsare made from high quality resins to cover almost anything. There is wide range of widths, lengths and mil thicknesses and colors. All our shrink wraps contains maximum UV inhibitors to last as long as 10-15 years in open.
Shrink filmscan be heat shrunk using a hot air electric gun, gas gun or flame gun which are also available with us.
Shrink coversof custom sizes made in rolls, bags or sewn for specific applications cane be custom developed. They can also be printed for signifying usage or can be colour coded.
HTIseries is cable wrapping machine is mainly used to packaging ofcable coil, copper coil, steel coil. which is with highly efficiency and nice packaging for saving labor and material cost.
eatures:
1.PLC & HMI for automatic operation with can be connected with production line.
2.Special system for easy loading and unloading.
3.Manual and automatic working mode for easy operation.
4. The converter is adopted to adjust the speed of the ring and rollers
5. Overlap of the packing tape according to requirement.
6.Automatic material cutting.
7.Guardrails, soft starts and stop for safety operation.
8.Central positioning for the best packaging.
9.Packaging tension is adjustable by special breaker.
10. Widely packing material applicable.
11.Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.
12.Special brake for the tape release device to avoid material folding.
HTI-200 | HTI-300 | HTI-400 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||
Power (KW) | 1.5 | 1.8 | 2.5 |
Steel coil ID(mm) | 150-300 | 300-600 | 300-900 |
Steel coil OD(mm) | 200-400 | 600-1000 | 700-1200 |
Steel coil width(mm) | 20-200 | 50-300 | 50-400 |
Steel coil Weight(Kg) | 5-20 | 20-200 | 100-500 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||
Ring speed(r/min) | 30-80 | 30-80 | 30-70 |
Wrapping speed | 25-35sec/pcs | 35-45sec/pcs | 40-50sec/pcs |
Overlapping rate | 20-80% |
HTI series iscopper coil packaging machinewhich mainly used to copper wire packaging, copper coilpackaging, copper tube coil packaging, steel coil packing. which is with highly efficiency and nice packaging for saving labor and material cost.
Features:
1.PLC & HMI for automatic operation with can be connected with production line.
2.Special system for easy loading and unloading.
3.Manual and automatic working mode for easy operation.
4. The converter is adopted to adjust the speed of the ring and rollers
5. Overlap of the packing tape according to requirement.
6.Automatic material cutting.
7.Guardrails, soft starts and stop for safety operation.
8.Central positioning for the best packaging.
9.Packaging tension is adjustable by special breaker.
10. Widely packing material applicable.
11.Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.
12.Special brake for the tape release device to avoid material folding.
HTI-200 | HTI-300 | HTI-400 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||
Power (KW) | 1.5 | 1.8 | 2.5 |
Steel coil ID(mm) | 150-300 | 300-600 | 300-900 |
Steel coil OD(mm) | 200-400 | 600-1000 | 700-1200 |
Steel coil width(mm) | 20-200 | 20-200 | 50-300 |
Steel coil Weight(Kg) | 5-20 | 20-200 | 100-500 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||
Ring speed(r/min) | 30-80 | 30-80 | 30-70 |
Wrapping speed | 25-35sec/pcs | 35-45sec/pcs | 40-50sec/pcs |
Overlapping rate | 20-80% |
Rust-XVCI Power Stretch Filmsare manufactured using state of the art SMP Technology for speedy moisturepassivation and provides long term corrosion protection to the packaged parts. Rust-XVCI Power Stretch Filmswhen stretched on metal products isolate the packed coils and sheets from influx of humidity and the VCIneutralizes the environment inside the package.
VCI Stretch films are suitable for ferrous and non-ferrous metals and inhibit the onset of corrosion, tarnishingetc for up to 5 years when used with a complete system designed by Rust-X. Rust-X VCI Stretch Films are madefrom special proprietary additives that increase the strength between the molecular chain thereby providing afilm with very high tear strength, tensile strength and dart impact.
METHOD OF USE AND SUITABILITY:
The Rust-XVCI Power Stretch Filmsare easy to install in machines. Custom sizes, lengths, thicknesses and coreIDs can be provided. Rust-X Stretch film uses up to 50% less film to wrap the same load as today's standardfilms. In addition, the film provides improved corrosion protection without sacrificing load holdingperformance.
There are two solutions for theprofile packing. one isprofile wrapping solution, another isprofile shrinking solution. Please click above accordingly your requirement. For more solution or specification requirement please contact us for further information.
PROFILE PACKING MACHINE----PROFILE WRAPPING MACHINE FEATURES:1. PLC & HMI for automatic operation with can be connected with production line.2. Widely packing material applicable.3. Manual and automatic working mode for easy operation.4. The converter is adopted to adjust the speed of the ring and rollers.5. Overlap of the packing tape according to requirement.6. Packaging tension is adjustable by special breaker.7. Guardrails, soft starts and stop for safety operation.8.Central positioning for the best packaging.9. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.10. Automatic material cutting and feeding for automatically operation.Note: Can be designed according your specification.
HTI-H300 | HTI-H600 | HTI-H1200 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||
Power (KW) | 1.5 | 2.8 | 3.5 |
Width(mm) | 50-300 | 100-600 | 400-1200 |
Length(mm) | 1200-3000 | 2000-4000 | 2000-4000 |
Weight(Kg) | 50-300 | 100-800 | 100-1000 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||
Ring speed(r/min) | 30-80 | 30-70 | 30-60 |
Wrapping speed | 2-12m/min | 2-10m/min | 2-9m/min |
Overlapping rate | 20-80% |
Exports of steel coils is a very critical task which requires specialised Rust Preventive Packaging schemes in synergism with highly effective rust preventive oils.RUSTX-EXExportGradeoils have higher, faster and longerduration of effective chemicals that protect the metallic components from saline atmospheres during sea transportation as well as long term storage.
RUSTX series oils contain VCI chemicals, which work in contact phase as well as in the vapour phase and protect components by its dual action
Application MethodSuitable for:
Coil Rolled Coils, Galvanized coils, Machined Steel Components, Castings, Forgings, CR sheets, Bearings, Gears, Transmission Components, Axles, Process Equipment, Flanges, Valvesetc.
Features
Properties | Test Method | Value |
Colour | Visual | Amber Clear |
Viscosity @ cSt @ 40°C | ASTM D 445 | 120 cSt |
Specific Gravity | ASTM D 1298 | 0.89-‐0.90 |
Flash Point (before application) | ASTM D 92 | 340 oF |
VOC | Pounds per Gallon | 0.1 |
Coverage (sq m/ Lt) | 25-‐50 | |
Film thickness | IS 2074 |
8-12 microns by direct dipping (controllable if passed through rollers or mist spraying) |
Pour Point | ASTM D 97 | Below 0oF |
Saponification Value (mg KOH/gm) | ASTM D 94 | 5.0-‐7.0 |
Washability | Yes | |
Removability | Yes | |
Paintability |
Yes if diluted No if concentrate |
Properties | Test Method | Value |
Salt Spray Protection | ASTM B 117 | 300 hours + |
Cyclic Chamber Test | SAEJ2334 | 40 cycles |
Humidity Chamber | ASTM D 1748 | 1080 hours + |
Indoor Protection Life (open) | 2 months | |
Indoor protection life (packed) | 2 years | |
Packaged Protection Life (In VCI Packaging) |
Upto 5 Years |
Bubble guardsheet is a definitive solution for the rigid packing system. It is a product that has thestrength, rigid shape, definitive structure and occupies least space whilst giving maximumprotection.
Bubble guardalso referred to as Mettwrap/Metal Wrap or Rigid bubble sheet is made fromPolypropylene and has three layers. The outer and the inner layer is sheet of PP which holds thesolid rigid hollow bubble that provides strength and shape to the sheet. It is used in a number ofapplications including packaging of steel coils, packaging separators, false ceiling, wall panels, doorpanels, wood protectors, floor protectors, wall facing boards, printing and other applications.
Property | Test Method | Value |
Colour | Visual | Blue , White, Black |
Specific Gravity of Granules | 0.92-0.94 | |
Physical Form | Rolls, Sheets | |
Tensile Strength MD at 300 gsm |
ASTM D 882 | 214 kg/cm2 |
TD | ASTM D 882 | 225 kg/cm2 |
Elongation MD at 300 gsm |
ASTM D 882 | 200% |
TD | ASTM D 882 | 190 % |
Bubble Size | 8 mm | |
Printing | Upto 6 colours possible | |
Maximum Size | Upto 2000mm | |
Maximum Length | Custom | |
Minimum Weight | 250 gsm | |
Maximum Weight | 3000 gsm | |
Minimum Thickness | 2mm | |
Maximum Thickness | 6 mm |
VCI non-wovenfabric is made up of compressed PP fibres having much higher puncture resistance, scratch resistance, tearresistance, tensile strength as well as dart impact strength compared to OrdiaryVCI paper.
In a number of applications it is important to use a Non-Woven fabric in order to protect from sharp edges of the part as wellas protruding parts which may puncture plastic or paper packaging.
RUST-XVCI non wovenfabric provides better corrosion protection with its protective vapors which neutralize the moistureas well as form a multi-molecular film on the surface of the metal and inhibit the electrolytic process of oxidation.
PACKAGING AVAILABLE
The fabric is available in rolls of 1500 mm or 1000 mm width and 250 meter length as well as in cut pieces custom or rolls of the requiredsize.
METHOD OF USE & APPLICATIONS
The product to be packed can be wrapped in the part covering all surfaces of the component or can be placed above thepacked components
Export and domestic packaging of expensive parts
Electronic components & devices
Steel coils wrapping
Heavy equipment and flat stack packaging
Pallet covers
Precision scientific devices
Interleaving of components & products
METALS PROTECTED
Carbon steel
Galvanized steel
Stainless steel
Copper and alloys
Aluminum and Aluminum alloys
Silver
Solder
Physical Properties | Test method | |
Colour | Visual | White |
Weight/sq meter |
Uncoated Weight Coated Weight |
45 gsm 65 gsm |
Thickness Availability | Micrometer | 275 microns |
Specific Gravity | ASTM D 1298 | 0.92 |
Surface pH | 8-9 | |
VCI Test (VIA) | Pass | |
Tensile Strength |
CD MD |
7200 gms 12600 gms |
Storage | 24 months in Dry Condition |
VCI filled bolt caps are plastic caps made of UV restistant plastic material and filled up with a preservative. When these are pressed on the bolt head, the VCI preservative flows out around the mating surface of the bolt and the flange area and protects the bolt, the threads and the flange thread from corrosion. These can be used to protect petrochemical plants, chemical plants, pipe lines, offshore equipment and has many other applications.
VCI Masking stickeris the ultimate solution in the industry for corrosion prevention and scratchprevention.
The product has a polymer white layer which is made from a co-extrusion process that has inside black film and further is co-joined with a black release base. The adhesives used are stain free release that leave no residue onthe surface of metal on which it is pasted. The film is impregnated with VCI additives during manufacturing process to enable corrosion prevention throughout the application life of product.
The product has great UV protection for upto 2-5 years and dont disintegrate so easily. The film also has great puncture resistance, tensile strength and surface finish.
Once applied on the surface it protects the metal from corrosion for upto 5 years depending on the locationwhere the part is placed and the environmental conditions. The adhesive doesnt release the metal at all andleave a dry part after peel off
Advantages:HTI Door wrapping machineis mainly used to packaging of profile, door, window. which is with highly efficiency and nice packaging for saving labor and material cost. Packing type:wrapping
The advantage of the door packaging by door wrapping machine:1. Energy save2. Material costs lower3. Easily maintaining.4. Highly efficiency
The disadvantage of the door packaging by door wrapping machine:1. Wrinkle in the surface of the package2. Two sides can't be sealing.
FEATURES:1. Automatic operation, which can be connected with production line.2. Widely packing material available.3. Manual and automatic working mode for easy operation.4. The converter is adopted to adjust the speed of the ring and rollers5. Overlap of the packing material according to requirement from 20%-80%.6. Packaging tension is adjustable by special breaker.7. Guardrails, soft starts and stop for safety operation.8.Central positioning for the best packaging9. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.10. Automatic material cutting and feeding for automatically operation.
HTI-H300 | HTI-H600 | HTI-H1200 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | ||
Power (KW) | 1.5 | 2.8 | 3.5 |
Width(mm) | 50-300 | 100-600 | 600-1200 |
Length(mm) | 1200-3000 | 2000-4000 | 2000-4000 |
Weight(Kg) | 50-300 | 100-800 | 100-1000 |
Packing material | PE/Stretch film/knit belt/VCI paper | ||
Ring speed(r/min) | 30-80 | 30-70 | 30-60 |
Wrapping speed | 2-12m/min | 2-10m/min | 2-9m/min |
Overlapping rate | 20-80% |
Strength Fabricis a woven fabric made on circular knitting machines from specialized high strengthHDPEresin with dosages of UV protection and optical brighteners made from Virgin polymersThe fabric is woven on automatic lines to ensure adequate strength is achieved by a Warp and Weft structure of the material.
Strength fabricby its name is symbolic to not just the advantage of High Strength but also excellent moisture penetrations properties and oxygen transmissions.It is laminated on both sides with Poly Ethylene of approx 20 gsm-25 gsm on each side with a hot lamination process and cannot be easily peeled off
Additives
RustX Additives are REACH Approved and ROHS Compliant. All additives are produced under supervision of chemists.
Coil tiltermainly apply to turn the objects. It widely used in the module up-ending, coil turning, modules upending. it' widely used in the steel coil, wire coil, aluminum coil.
FEATURES:1. Special double chain drive, oblique gear and worm speed reducer.
2. Four-roller device wrapped with polyamide adhesive.
3. Inverter controls, Fast , stable and safe.
4. Two displacement restrictors adopted to grantee a safety operation.
HTI-CT-03 | HTI-CT-05 | HTI-CT-08 | HTI-CT-10 | |
Voltage (V/Hz) | AC 380/50( or your requirement) | |||
Power (KW) | 1.2 | 2.0 | 2.5 | 3.5 |
Max.Loading (Kg) | >3000 | >5000 | >8000 | >10000 |
Turning speed(min/set) | 20-40 | 20-40 | 20-40 | 20-50 |
Corrugations contain high level of humidity.VCI 3D Carton Linersare used to protect steel components from effects of moisture.
These are available as per the size of the carton in Gusseted (703G), 5 sided extended height (703 XH) or 6 sided bag with a flap (703FL)
Thickness | 75 to 500 microns |
TubeSizes | 10" to 200" tube |
Colour | Blue/Yellow/Transparent |
Printing | Upto 8 Colours |
VCI bubble wrapsare used where impact protection such as dents, scratches are required on the parts during shipment and storage. These can be provided in the form or sheet or in custom sized bags.
Thickness | 75/90/120 gsm |
Tube Sizes | 3" to 40" tube |
Colour | Blue/Yellow/Transparent |
VCIJelly/Paste is a soft brown viscous liquid jelly which can be applied with a brush on the parts to be protected. The compound is highly active against corrosion under the most damaging environmental conditions and provides long term corrosion protection.
The Jelly/Paste molecules are highly hydrophobic and do not allow moisture or water to permeate through the layer protecting the metal from corrosion. The Jelly/Paste is highly active against acidic fumes and provides excellent corrosion protection in the acidic environments such as pickling areas or sea humidity. The property of High Reserve Alkalinity allows for a heavy buffer against acidic fumes.
This can be used to coat structures and equipment which has to be placed in the open areas, undergo rough handling, unpacked refinery equipment, oil pipeline equipment and parts, off shore refineries, heat exchange, wind mill parts and other process equipment and parts.
Features
Advantages
Protective filmis based onPE FilmandBOPP Filmtreated with special proprietary adhesives and several special additives. The adhesive is colorless and transparent with good tenderness and stickness and enjoys wide application in surface protection on various plates, sheet, profiles, boards. etc. The sheet can be printed in upto 6 colours.
ThePP Flute BoardsorPolypropylene Flute Sheetshave doubled wall profile extrusion that is joinedby series of vertical ribs. It is a versatile product with worldwide applications due to properties of toughPolypropylene. It is impegrataned during manufacturingVCI Chemicalsto help provide corrosionprevention to the steel parts placed in contact with theCorrugated Flutewhilst providing cushioning, protection and abrasion resistance of metal.
Owing to their high strength and durability, theseVCI PP Flute Boardsare highly demanded among the clients. TheVCI Polypropylene Flute Sheetsare recyclable, termite / vermin proof, water resistant, and durable.
Advantages:High thickness to weight ratio making it one of the lightest packaging material
Flexible
Scratchproof
Waterproof
Abrasion Resistant
Provides cushioning
Impact resistant
VCIHDPE Tapeis made up from wovenHDPE fabric tape, with liner, with high bond strength.
The adhesive system is tacky and has very high adhesion to most surfaces. Excellent tear resistance in both directions and waterproof properties make it a good sealing tape. The sealing properties of RUST-XVCI tapesare exceptional with very high bonding and does not get released with heating or moisture exposure. This finds its use for packaging of automotive components, engine packaging, heavy machinery packaging etc.
We are offering Vci Paper - ( Laminated, Unlaminated) etc.Rustx VCI Paper are avilable for Fe, Al metal ane also for multimetal. VCI coating provide higah level of rust protection.
Additional Information:
Payment Terms : L/C
Delivery Time : 10-12 days
RUST-X 40 spray is a dual action product comprising:
A thin film typerust preventive oil, which provides
lubrication during use but dries to an invisible film after 5-10
minutes of application.
This film is capable of providing short to long-term corrosion
prevention depending upon the usage, packaging and the
environment.
RUST-X Rust Preventive Oilshave longercorrosion preventionability owing to its registered and patentedVCItechnology.Rust-X oilsprevent corrosion of the metallic components in the most damaging environment byproviding sea worthycorrosion preventionfrom saline atmosphere as well as during long term storage of parts.
RUST-X 40 spraycontains a thin film type rust preventive oil, which provides lubrication during use but driesto an invisible film after 5-10 minutes of application. This film is capable of providing short to long-termcorrosion prevention depending upon the usage, packaging and the environment.
RUST-X 40works well for steel, aluminum, iron, brass, copper, zinc, nickel, chromium and other multi-metalsystems. The penetrating property of the oil provides ability to loosens rust, stuck bolts, hinges and othermechanical pasts. This also reaches and lubricates crevices, voids and difficult to reach areas.
RUST-X 40has a dewatering and water displacement property and removes moisture and water from metalsurfaces, car delcos, spark plugs, cables and battery terminals.
Property | Value |
Colour | Transparent on application |
Odour | Mild Jasmine Odour |
Dewatering | Pass |
Degreasing | Pass |
Flash Point After Drying | 220 C |
Rust Preventive Layer | 1 Micron |
Protection Period | 2-3 years in packed condition for a steel component |
VCI chipsmanufactured byRUST-Xare impregnated with volatile corrosion inhibiting chemicals that can provide protection to metal components placed in the vicinity of the chips for a long term. Goods protected byRUST-XVCI chipsare not affected by corrosion. The reason for this is that the air surrounding the metals protected withRUST-XVCI chipsis very heavily impregnated with the inhibitors released from the protectivepaper.
The micro-moisture droplets become so heavily impregnated with corrosion inhibitors released fromRUST-XVCI chipsthat these droplets themselves become rust preventives, and will not form corrosion on the metal surfaces. In effect corrosion is inhibited in vsicnity ofVCI Chips.
Application MethodPlaceVCIChipsalong with the components to beprotectedfrom corrosion.
Metals Protected
Advantages
ltr | cc | Size |
0.1 | 100 | 10 x 10 mm |
0.2 | 200 | 15 x 15 mm |
1 | 1,000 | 30 x 30 mm |
2 | 2,000 | 43 x 43 mm |
2.5 | 2,500 | 50 x 50 mm |
5 | 5,000 | 71 x 71 mm |
25 | 25,000 | 100 x 120 mm |
80 | 80,000 | 170 x 240 mm |
125 | 125,000 | 245 x 250 mm |
250 | 250,000 | 250 x 490 mm |
500 | 500,000 | 490 x 500 mm |
1000 | 1,000,000 | 1490 x 1000 mm |