Steel Coils

We offer a complete product range of Steel Coil

Steel Coil

Exports of steel coils is a very critical task which requires specialised Rust Preventive Packaging schemes in synergism with highly effective rust preventive oils.RUSTX-EXExportGradeoils have higher, faster and longerduration of effective chemicals that protect the metallic components from saline atmospheres during sea transportation as well as long term storage.

RUSTX series oils contain VCI chemicals, which work in contact phase as well as in the vapour phase and protect components by its dual action

Application Method

In circulation system it can be used in electrostatic spraying.
Provides bite and feed through properties
It can be sprayed using high pressure gun
It can applied by letting a few drops pass through rollers
Other methods may be used such as mist spraying, electrostatic spraying, brushing, automatic conveyor spray or dip process pray. It is important that the complete surface of the component is coated with the rust preventive oil.

Suitable for:

Coil Rolled Coils, Galvanized coils, Machined Steel Components, Castings, Forgings, CR sheets, Bearings, Gears, Transmission Components, Axles, Process Equipment, Flanges, Valvesetc.

Features

Lubricating oil film
Thixotropic properties
Long Term Corrosion Prevention
Electrostatically Sprayable
Easily washable with water and solvent based products
Excellent protection against acidic and saline environments
Non Sticky soft film

Technical Properties

Properties	Test Method	Value
Colour	Visual	Amber Clear
Viscosity @ cSt @ 40°C	ASTM D 445	120 cSt
Specific Gravity	ASTM D 1298	0.89-‐0.90
Flash Point (before application)	ASTM D 92	340 oF
VOC	Pounds per Gallon	0.1
Coverage (sq m/ Lt)		25-‐50
Film thickness	IS 2074	8-12 microns by direct dipping (controllable if passed through rollers or mist spraying)
Pour Point	ASTM D 97	Below 0oF
Saponification Value (mg KOH/gm)	ASTM D 94	5.0-‐7.0
Washability		Yes
Removability		Yes
Paintability		Yes if diluted No if concentrate

Corrosion Prevention Properties

Properties	Test Method	Value
Salt Spray Protection	ASTM B 117	300 hours +
Cyclic Chamber Test	SAEJ2334	40 cycles
Humidity Chamber	ASTM D 1748	1080 hours +
Indoor Protection Life (open)		2 months
Indoor protection life (packed)		2 years
Packaged Protection Life (In VCI Packaging)		Upto 5 Years